sanag Z63S Pro True Wireless Stereo Bluetooth Headset User Guide
- June 12, 2024
- sanag
Table of Contents
sanag Z63S Pro True Wireless Stereo Bluetooth Headset User Guide
Product Overview
Operating Instructions for Headset Functions
- Boot: automatic boot, open the charging box earphone boot; Turn on the headset manually, long press the MFB button on the left/right ear for 35 earphone When the machine is turned on, the blue light will keep on for 15, and then the red and blue light will flash alternately.
- Shutdown: automatic shutdown, headphones into the charging box and cover; If the device is not connected after the headset is turned on, wait for more than 5 minutes Clock earphone off, red light flashing 3 times; Manual shutdown, long press the left/right MFB button of any headset for 55, the red light flashes for 3 times.
- Pairing state: The left and right earphones will automatically pair after starting up. The red and blue lights of the main ear will flash alternately and slowly, and the blue lights of the secondary ear will flash every 15.
- Successful pairing with the mobile phone: When the left and right earphones are connected successfully, turn on the Bluetooth of the mobile phone and find the device name in the Bluetooth list.
- Disconnect: Disconnect the headset from the Bluetooth list of the mobile phone. The red and blue light of the main ear will flash alternately and slowly, and the blue light of the secondary ear will flash every 15.
- Connect back/overdistance timeout: there is a pairing record between the headset and the mobile phone. The bluetooth of the mobile phone is turned on. After the headset is turned on, it will automatically connect back to the mobile phone. When the connection between the mobile phone and the headset exceeds the Bluetooth connection distance, the mobile phone can be connected back to the effective range within 5 minutes, and the earphone will automatically shut down after 5 minutes.
- Pause/Play: Click the MFB button on the left or right ear.
- Last song: Double click MFB on left ear.
- Next: Double click MFB on right ear.
- Volume reduction: three clicks right ear MFB key.
- Volume plus: Three hits left ear MFB key.
- Reject calls: Double click the MFB button on the left or right ear. Answer a call: press the MFB button on the left or right ear.
- To end the call: Short press the MFB button on the left or right ear.
- Wake up the voice assistant: long press the MFB button on the left ear or right ear for 1.55 to release when the headset is connected to the Bluetooth of the mobile phone (not in conversation).
- Low power reminder: when the earphone is turned on, the earphone power is less than =10%, and the red light flashes for 5 seconds. MFB button of the left ear or the right ear for four consecutive times and the red light
- Restore factory Settings: When the earphone is turned on and not connected, click the blinks for three times to shut down, and the information about pairing the earphone with the mobile phone is cleared.
- Earphone charging: Put the earphone into the charging box and close the cover. The earphone enters the charging state. The red light flashes quickly, and the earphone is fully charged.
Charging box function operation instructions
- Charging box charging: external TYPE-C charging, charging, red light flashing, fully charged, red light on.
- Charging box to charge the earphone: Put the earphone into the charging box and close the cover. When charging the earphone, the blue light of the charging box is on and off.
Bluetooth pairing
-
Open the charging compartment, and the earphone will start automatically; Please connect Bluetooth headset to mobile phone (or other connected device) Within the range of 50CM, the closer the better.
-
Enable the Bluetooth function of the user’s mobile phone (or other Bluetooth devices) to search or scan Search for all nearby Bluetooth devices and click Connect.
Search headset
successful I connection
Specifications
- Name: TWS Bluetooth headset
- Model: sanag Z63S Pro/Max
- Horn specification: fourteen point two
- Bluetooth version: V5.3
- Connection range: > 10m
- Headphone battery capacity: 140mAh
- Battery capacity of charging bin : 700mAh
- Rated input: 5V-0.5A
- Playback duration: about 10H
Matters needing attention
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to be heated or close to a fire source, such as a cooking stove.
- Do not expose the product to direct sunlight for a long time.
- Do not discard this product in fire to avoid explosion.
- Do not attempt to disassemble this product to make any modifications, as it does not contain any maintenance components.
- Do not use this product in rain.
- If you do not plan to use this product for a long time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>