sanag M13S Pro Bluetooth Speaker User Manual
- June 4, 2024
- sanag
Table of Contents
sanag M13S Pro Bluetooth Speaker
PRODUCT ACCESSORIES
INSTRUCTION FOR USE
- Volume/Next track
- Power on/off Answer call/end call/reject call Music play/pause
- Volume+I previous song
- Type C Charging Cable
- Charging indicator
- TF card slot
- Glare indicator
Power on:
In the off state, long press the key O for 3 seconds to start the machine. The
glare indicator is ice blue and fiashes quickly, with a prompt tone.
Power off:
In the power on state, long press O 03 seconds to shut down, and the glare
indicator light goes out; There is a prompt tone.
Bluetooth pairing:
Open the Bluetooth device, find the sanag M13S Pro in the list, and click
Connect. Glare indicator The ice blue light is on for a long time.
Answer the call:
When the phone calls, briefly press the key O to answer the call
End the call:
Short press the key O to hang up
Reject the call:
When the phone calls, long press the O key for 2 seconds to reject the col.
Play / Pause:
Click the key O to switch the music between pause/play. During playback, the
glare indicator light follows The rhythm of the music flickers.
Low voltage:
when the battery voltage of the speaker is too low, the speaker will give a
low power alarm. The glare indicator is red flash.
Charging:
plug in DC 5V power supply for charging, and the red light is always on during
charging.
Fully charged:
the charging indicator light is green.
Volume :
click the speaker + key to increase the volume. At the maximum volume, there
is a prompt tone.
Volume-:
click the speaker key to decrease the volume.
Previous song: long press the + key for 2 seconds.
Next song:
long press the O key for 2 seconds.
TF card mode: Insert the TF card, and the speaker will switch to the TF card
mode by default. Double-click the O key to switch to TF card mode or Bluetooth
mode.
Mode switching of glare indicator
There are three modes after connecting the Bluetooth of the mobile phone:
Press thekey three times to switch between different modes
- Gradient mode: after connecting the Bluetooth of the mobille phone, the music sounds and the light slowly fades between various colors.
- listening mode: after connecting the Bluetooth of the mobile phone, the music sounds, and the lights display different brightness according to the size of the music.
- no indicator mode: after connecting the Bluetooth of the mobile phone, the music sounds, the light goes out and does not display.
Download APP
This product supports APP connection, scan the QR code below to download the Sanag APP to experience more functions.
SPECIFICATIONS
Frequently Asked Questions and Matters
Unable to turn on speaker:
Check if the speaker has no power, if there is no power, please charge it
first.
Unable to connect with device:
Check if the speaker is connected to the third device, if so, disconnect it
first
Connect, if you still can’t connect, reboot and try again.
Precautions
- Keep out of reach of children
- Do not hit the speaker
- Do not charge for too long, so as not to damage the battery
Precautions
- Please fully charge the product before using it for the first time.
- Do not dismantle or repair or modify this product for any reason, otherwise it may cause fire, electronic breakdown or even Completely damage the product.
- If charging is completed, please disconnect the charger from the device, and unplug the charger.Do not exceed 12 hours.
- Please do not dispose of the old battery in the old household garbage. Improper disposal of the battery may damage the battery In case of fire or explosion, please dispose of this product, battery and other accessories in accordance with local regulations.
- The battery must not be disassembled, impacted, squeezed or thrown into fire. If it is severely swollen, do not continue to use it.
- Do not repair this product yourself.
- If consumers use a power adapter to charge, they should purchase a matching power adapter to obtain CCC certification and meet the standard power adapter.
- Batteries must not be exposed to excessive heat.
Note: Unsolicited applicator.
Warranty Service
Please read the following terms carefully to protect your rights. You are ensured to have our best after-sales service
Free return/exchange conditions
- The appearance/function does not meet your expectations within 30 days from the date of purchase
Any quality problems of the products within 12 months from the date of purchase In the above cases, please email Sanag Customer Service Team and we will provide a solution within 24 hours.
How to contact us?
- Please click the store name on the product page, then click “Ask a question” button to contact us.
- Account Services – [Order History] – [Contact Seller]
- sanag@szdido.com
After-sales service cannot be provided even under the warranty period under the following conditions.
- Damage caused by personal:
- Product failure due to improper repair or storage
- Product failure due to self-demolition or repair
- Product failure by force majeure (fire,flood, earthquake and soon)
This product has been tested by our company’s quality control department and its performance parameters are in compliance With technical standards.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>