sanag A5X Bluetooth Headset Instruction Manual
- June 1, 2024
- sanag
Table of Contents
A5X
Operating Guide
Thank you for choosing our bone conduction Bluetooth headset for a better experience Please read the instruction manual carefully before using this product. If there is any printing error or Translation errors hope that the majority of users understand
Overview of key features
- Indicator hole
- On/Off key/Multi-function key
- Charging interface: TYPE C interface
- Volume down/previous song: Short press the volume down, long press the previous song
- MIC call port
- Volume up/next song: short press volume up, long press one song
- Sound unit: bone conduction speaker
Charging use
When the earphone is low voltage, the red light flashes once per second, and
there is an alarm sound. Please connect the power supply at this time.
The adapter will charge the headset, otherwise the headset will automatically
shut down when the headset battery is too low.
The headset is charged via the Type C charging cable. After the charging is
completed, the working indicator changes from red (steady on) to blue (steady
on). Note: “Please use a DC 5V power adapter that meets national standards and
has passed CCC certification for charging.”
Bluetooth pairing
- First boot pairing:
In the off state, long press the multi-function button for 3 seconds, the blue light is always on for 1 second, the red/blue light alternately flashes, the headset is turned on and directly enters the pairing search mode, the power is accompanied by a prompt sound, and the mobile phone or smart electronic device is turned on, from Bluetooth In the list, find “Sanag A5X,” and click Connect. Connect.
Key operation
-
Headset on: In the off state, press and hold the multi-function button for 4 seconds, the blue light is always on for 1 second, the red/blue light flashes alternately, and the headset is turned on with a beep.
-
Headset off: When the headset is turned on, press and hold the multi-function button for 4 seconds, the red light will be on and then it will go out, and the headset will turn off. Accompanied by a beep.
-
Disconnection, over distance disconnection or equipment shutdown: When the mobile phone and headset are beyond the Bluetooth connection distance, the headset will give an alarm tone and the mobile phone and headset will be disconnected. The headset and the phone can automatically connect back within 3 minutes if the headset is within the Bluetooth connection range of the headset and the phone. After three minutes, the headset enters the standby state. If the headset is not connected after 5 minutes, the headset will automatically shut down.automatically.
-
Music play / pause: Short press the multi-function button, music play/pause, play status: blue light flashes once in 5 seconds Pause status: blue light flashes once in 10 seconds.
-
Answer / reject: The first call comes in, short press the multi-function button to answer it; long press the multi-function button to reject it.
-
Hang up during a call
Short press the multi-function button to hang up. -
Next song button/volume up
In the music state, short press the volume up button and the volume continues to increase. When it reaches the maximum, there will be a beep.Playing status, long press to switch to the next song. -
Previous song button/volume down
In the music state, short press the volume down button and the volume will continue to decrease. When it reaches the minimum, there will be a beep.
Playing status, long press to switch to the previous song.
Matters needing attention:
- When the phone is turned on without connecting to any mobile phone, it will automatically turn off after 5 minutes.
- Please fully charge the product for the first use.
- Please do not dismantle or repair or modify this product for any reason, otherwise it may cause fire and electronic breakdown.To completely damage the product.
- If the charging is completed, please disconnect the charger from the device, Do not exceed 12 hours.
- Please do not throw old batteries in old household garbage for disposal. Improper disposal of batteries may cause damage.If the battery catches fire or explodes, please follow local regulations to dispose of this product, battery and other accessories.
- The battery is not allowed to be disassembled, hit, squeezed or thrown into fire. If it is severely swollen, please do not continue to use it.The battery must not be exposed to excessive heat.
- Do not repair this product by yourself.
- If consumers use a power adapter to charge, they should purchase a matching power adapter that has been certified by CCC and meets the standard.
Basic parameters
- Weight: About 27.3g
- Earphone type: sports bluetooth earphone
- Bluetooth version: V 5.3
- Charging input: DC 5V ****170mA
- Transmission distance: 10 meters
- Product impedance: 160Ω±10%
- Headphone size (length, width, height): 13510545mm
- Charging time: about 1.5 hours (the first charge is preferably more than 2 hours)
- Working temperature: -20°C to 70°C
- Storage temperature: -20°C to 70°C
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>