TAIYU CS-13BLACK 3 In 1 Charging Station Instruction Manual

TAIYU CS-13BLACK 3 In 1 Charging Station Instruction Manual

Part list

Note: If parts in the packing box don’t check with the list, please contact us in time.

• 3 in 1 Charging Stand* 1

• Padding* 2

• Type-C Cable* 1

Paddings

Optional use to increase the height to align watch with charger center.

For iWatch

Series 1 / 2/ 3 (38mm).
Series 4/5/6/SE(40mm).

1. Press to make the plug stand up.

2. Make the watch charger up.
   

Adapter compatibility

(Adapter Not Included)

Reasons why the wireless charging station doesn’t work

1. High temperature protection: Try again later.
   

2. Covered by something (metal object).
   

3. Adapter failure
   We recommend adapter with QC2.0 standard or above.

   • Adapter your adapter fails.
   • Adapter overhigh output voltage.

NOTE!

This port is only designed for AirPods/ AirPods Pro. Do not charge phone here , or it may destroy the plug.

Warm Tips

Reach us by your Amazon order detail page (select “order”, “sold by” or “contact seller”) for warranty about it.

Specifications

1. Highest internal frequency: 110KHz – 205KHz (phone) 350KHz (watch)
2. Input: 9V2A
3. Output: 5V1A/9V1.1A

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.

Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>