Sanag M13S Pro Bluetooth Waterproof Wireless Speaker User Manual

June 9, 2024
sanag

Sanag M13S Pro Bluetooth Waterproof Wireless Speaker

Product Accessories

Sanag M13S Pro Bluetooth Waterproof Wireless Speaker
\(1\)

  1. Speaker X1
  2. user’s manual x1
  3. Type-C Charging Cable x1
  4. Warranty card x1

Instructions for use

Sanag M13S Pro Bluetooth Waterproof Wireless Speaker
\(3\)

  1. OVolume-/Next track
  2. Power on/off Answer call/end call/reject call Music play/pause
  3. Volume+/ previous song
  4. Type C Charging Cable
  5. Charging indicator
  6. TF card slot
  7. Glare indicator
  • Power on: In the off state, long press the O key for 3 seconds to start the machine. he glare indicator iS ICe blue and flashes quickly, Witn a prompt tone.
  • Power off: In the power on state, long press 3 seconds to shut down, and the glare indicator light goes out; Ihere is a prompt tone.
  • Bluetooth pairing: Open the Bluetooth device, find the sanag M13S Pro in the list, and click Connect. Glare indicator The ice blue light is on for a long time.
  • Answer the call: When the phone calls, briefly press the key to answer the call
  • End the call: Short press the O key to hang up
  • Reject the call: When the phone calls, long press the key for 2 seconds to reject the call. Play/ Pause Click the ) key to switch the music between pause/ play. During playback, the glare indicator light follows The rhythm of the music flickers.
  • Low voltage: when the battery voltage of the speaker is too low, the speaker will give a low power alarm. The glare indicator is red flash.
  • Charging: plug in DC 5V power supply for charging, and the red light is always on during charging.
  • Fully charged: the charging indicator light is green.
  • Volume +: Click the speaker + key to increase the volume. At the maximum volume, there is a prompt tone.
  • Volume –: Click the speaker key to decrease the volume.
  • Previous song: long press the + key for 2 seconds.
  • Next song: long press the- key for 2 seconds.
  • TF card mode: Insert the TF card, and the speaker will switch to the TF card mode by default. Double-click the key to switch to TF card mode or Bluetooth mode.
Mode switching of glare indicator

There are three modes after connecting the Bluetooth of the mobile phone: Press the key three times to switch between different modes

  • Gradient mode: after connecting the Bluetooth of the mobile phone, the music sounds and the light slowly fades between various colors.
  • listening mode: after connecting the Bluetooth of the mobile phone, the music Sounds, and the lights display different brightness according to the size of the music
  • no indicator mode: after connecting the Bluetooth of the mobile phone, the music sounds, the light goes out and does not display.

Specifications

Sanag M13S Pro Bluetooth Waterproof Wireless Speaker
\(4\)

Frequently Asked Questions and Matters

Unable to turn on speaker:

  • Check if the speaker has no power, if there is no power, please charge it first.

Unable to connect with device:

  • Check if the speaker is connected to the third device, if so, disconnect it first
  • Connect, if you still can’t connect, reboot and try again.
Precautions
  • Keep out of reach of children
  • Do not hit the speaker
  • Do not charge for too long, so as not to damage the battery
  • Please fully charge the product before using it for the first time.
  • Do not dismantle or repair or modify this product for any reason, otherwise, it may cause fire, electronic breakdown, or even Completely damage the product.
  • If charging is completed, please disconnect the charger from the device, and unplug the charger. Do not exceed 12 hours.
  • Please do not dispose of the old battery in the old household garbage.
  • Improper disposal of the battery may damage the battery In case of fire or explosion, please dispose of this product, battery and other accessories in accordance with local regulations.
  • The battery must not be disassembled, impacted, squeezed or thrown into the fire. If it is severely swollen, do not continue to use it.
  • Do not repair this product yourself.
  • lf consumers use a power adapter to charge, they should purchasea matching power adapter to obtain CCC certification and meet the standard power adapter
  • Batteries must not be exposed to excessive heat.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals