sanag A11S Pro Bluetooth Headphone User Guide
- June 6, 2024
- sanag
Table of Contents
sanag A11S Pro Bluetooth Headphone
Thank you for choosing our bone conduction Bluetooth headset for a better experience Please read the instruction manual carefully before using this product. If there is any printing error or Translation errors hope that the majority of users understand
Overview of key features
- Volume decrease / previous song
- On / off button / volume increase / next song
- Charging terminal interface type C
- Work indicator hole display
- Call radio hole
- Horn outlet
- Multi function keys
Charging use
When the earphone is under low voltage, the red light flashes once a second
and there is an alarm sound. At this time, please connect the power adapter
The charger charges the headset, otherwise the headset will automatically shut
down when the power of the headset is too low. After the headset is charged
through the Type C charging cable, the working indicator changes from red
(steady on) to blue (steady on).
Note: “Please use a DC SV power adapter that meets national standards and
has passed CCC certification for charging.”
Bluetooth pairing
First boot pairing:
In the off state, long press the volume”+” key for 2 seconds, the blue light
is always on for 1 second, the red/ blue light flashes alternately, the
headset is turned an and directly enters the Bluetooth pairing search state of
the mobile phone. Then openthe mobile phone or smart electronic device, find
“Sanag A11S Pro” from the Bluetooth list, and click Connect.
Key operation
- Headset on: In the off state, long-press the volume”+” key for 2 seconds, the blue light is always on for 1 second, the red / blue light flashes alternately, and the headset is turned on with a prompt tone. After the headset is turned on, it will automatically search and connect with the paired Bluetooth device
- .Headset off: When the headset is turned on, long press the volume”+” key for about 5 seconds, the headset is turned off, and the red light goes out after it is always on.
- Disconnection, over distance disconnection or equipment shutdown: When the mobile phone and headset exceed the Bluetoo connection distance, an alarm tone appears in the headset, and the mobile phone and headset are disconnected. Return to the Bluetooth connection range between the headset and the mobile phone within 3 minutes. The headset and the mobile phone can be connected automatically. After 3 minutes, the headset will enter the standby mode. If it is not connected after 5 minutes, the headset will turn off automatically.
- Bluetooth mode and TF card mode switching Double click the multi-function button, and the headset will switch between TF card mode or Bluetooth mode, accompanied by “card mode” or “Bluetooth mode” prompt tone.
- Music play/pause: Briefly press the multi-function key to play/pause music.
- Playback status: the blue light flashes once in 5 seconds.
- Pause status: the blue light flashes once in 10 seconds.)
- Answer/ reject: When the first call comes in, briefly press the multifunction key to answer; Press and hold the multifunction key to reject
- Hang up Short press the multifunction key to hang up.
- Next key/volume up In the music state, press briefly and the volume continues to increase. When it is increased to the maximum, there is a prompt tone and a prompt tone; Beep. In playback status, long press 2s to switch to the next song.
- Previous key/volume reduction In the music state, press briefly and the volume continues to decrease. When it decreases to the maximum, there is a prompt tone and a prompt tone; Beep. In playback status, long press 2s to switch to the previous song.
- How to copy data In any state, insert the data cable into the PC or mobile phone (with OTG adapter) and read it to the USB flash disk, And copy the required songs or data files to the device.
Matters needing attention:
- if no mobile phone is connected after startup, it wil automoticolly shut down after 5 minutes.
- please fuly charge the product for the first time.
- do not dismantle, repair or refit this product for any reason, otherwise it may cause fire and electronic breakdown To completely damage the product.
- do not immerse the product in liquid
- after charging, please disconnect the charger from the equipment and unplug the charger for continuous charging Do not exceed 12 hours.
- please do not throw the old battery into the old household garbage for treatment. Improper disposal of the battery may lead to damage If the battery is on fire or explodes, please comply with local regulations to dispose of the product, battery and other accessories.
- it is forbidden to disassemble, impact, squeeze or put the battery into the fire. Do not continue to use it in case of serious expansion.
- do not repair the product by yourself. Basic parameters
- weight: bare metal 26g
- headset type: Air conduction sports earphone
- Bluetooth version: V 5.2
- charging input: DC 5V = 200mA
- transmission distance: lOM
- orn frequency range: 20Hz – 20KHz
- earphone size (length, width and height): 132 105 45mm
- battery: polymer battery/ 170mAh
- playback durat ion: about 8 hours
- charging time: about 1.5 hours (preferably more than 2 hours for the first charging)
- operating temperature: – 20 °C to 45 °C
- storage temperature: – 20 °C to 45 °C
FCC Rules.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment of f and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.