Sanag M7 Bluetooth Speaker Instruction Manual
- June 3, 2024
- sanag
Table of Contents
Sanag M7 Bluetooth Speaker
Instructions for use
- Long press to power on/off; Short press once to pause/play, (Long press 10 seconds to reset)
- Short press to turn the volume down, long press to previous song
- Short press to turn the volume up, long press to next song
- USB port: charge the speaker
Red LED indicator: Charging status(when the battery is fully charged, the red indicator will be off.) The front blue LED indicater blinks, the power is on.
Specifications
Battery Capacity: 1800mAh
Input Voltage: 5V
Speaker: 4Ω5
Frequency Response: -lOGO 100Hz-18kHz
STN: ≥85±2db
Distortion: ≤0.5%
Waterproof: IPX6
Product Size: 8492mm
Control Distance: l0M
Weight: 280g
TWS Interconnection
- Press the power-on button to turn on the two speakers.
- Short press the power button twice will be in prepared.
- Paired successfully, the speaker will have paired beep.
- you have paired two speakers before, they will connect automatically next time.
- in TWS connection, short press any two times, it will be used as a single speaker
Warranty Service
Please read the following terms carefully to protect your rights. You are ensured to have our best after sales service
-
Free return/exchange conditions
• The appearance/function does not meet your expectations within 30 days from the date of purchase
• Any quality problems of the products within 12 months from the date of purchase In the above cases, please email Sa nag Customer Service Team and we will provide a solution within 24 hours. -
How to contact us?
• Please click the store name on the product page, then click “Ask a question” button to contact us.
• [Account Service] – [Order History] – [Contact Seller] • sanag@szdido.com
-
After-sales service cannot be provided even under the warranty period under the following conditions, Damage caused by personal reasons:
Product failure due to improper repair or storage
Product failure due to self-demolition or repair
@Product failure by force majeure (fire, flood, earthquake and so on)
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits fora
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
\
FAQ
l.Fail to turn on the speaker?
Check if the speaker has power. Try to charge it and try again later.
2.Fail to connect Bluetooth devices?
Check if it is connected to another Bluetooth device. If connected, disconnect and try again. It still doesn’t work, try restarting the speaker.
3.Whether the speaker is waterproof?
Useful waterproof speaker, great for in the shower, by the pool, outside etc.
4.Does the speaker have a microphone and support calling?
Speaker does not have a built-in microphone.
5.Does this speaker have automatic shut off to save battery life?
Right, when you don’t listen to music, disconnect your phone’s Bluetooth and it will automatically turn off after 10 minutes. Next time you want to listen, turn on the speaker and the phone’s Bluetooth will automatically connect.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>