PROGRESS Est 1931 Iridescent Glass Kettle Instruction Manual
- June 6, 2024
- PROGRESS
Table of Contents
PROGRESS Est 1931 Iridescent Glass Kettle
Please read all of the instructions carefully and retain for future reference.
Safety Instructions
- When using electrical appliances, basic safely precautions should always be followed.
- Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
- Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance, only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance.
- Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance.
- This appliance is not a toy.
- This appliance contains no user serviceable parts. If the supply cord, plug or any part of the appliance is malfunctioning, or if it has been dropped or damaged, only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm.
- Keep the appliance and its power supply cord out of the reach of children.
- Do not immerse the electrical components of this appliance in water or any other liquid.
- Do not leave the appliance unattended whilst connected to the mains power supply.
- Do not use any power supply base unit other than the one provided with this appliance.
- Do not fill the appliance above its max. fill mark. Overfilling the appliance may cause boiling water to be ejected.
- Use of an extension cord with the appliance is not recommended.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
Exercise caution when using this appliance, as steam will be emitted from the
spout and/or lid, especially whilst refilling.
Caution: Hot surface – do not touch the hot section or heating components of the appliance.
Warning: Boiling water and steam can cause serious injury; exercise extreme caution when using this appliance. Do not open the lid while the kettle is boiling.
The appliance will become very hot during use; do not touch the appliance and
always take core when handling.
Misuse of the appliance could cause injury to the user.
The body of this kettle is mode from glass, core should be taken not to knock
the kettle when handling. If the glass body becomes cracked or chipped,
discontinue use immediately.
Caution: Always allow the appliance to cool thoroughly before touching or opening the flip-top lid.
Boil-dry Sensor
If the kettle is accidentally turned on whilst empty, the boil-dry sensor will
activate causing the power to switch off. Do not try to use the kettle during
this time; once it has cooled down, it will resume its normal function.
Care and Maintenance
- Before attempting any cleaning or maintenance, unplug the kettle from the mains power supply and allow it to cool fully. Wipe the kettle and power base with o soft, damp cloth then allow it to dry thoroughly.
- Do not immerse the kettle in water or any other liquid.
- Never use harsh or abrasive cleaning detergents or scourers to clean the kettle as this could cause damage.
- If there is any solid residue on the inside of the kettle, carefully remove this with a damp cloth or brush.
Removing Limescale
If the kettle switches off before it has boiled or a white deposit is noticed on the inside of the kettle, it needs to be descaled. Add a commercial descaling agent to the kettle, adhering to the manufacturer’s instructions. It is not recommended to use vinegar to descale the kettle.
Description of Parts
- Iridescent Glass Kettle
- Power base
- Power switch
- Blue/Red LED ring
- Handle
- Min. fill mark (0.5 L}
- Max. fill mark (1.7 L)
- Water fill gauge
- Flip-top lid
- Spout
- Lid release button
Before First Use
Before using the kettle for the first time, wipe it clean with a soft, damp
cloth and dry thoroughly.
Do not immerse the kettle in water or any other liquid.
Fill the kettle to the Max. fill mark and boil the water, following the
instructions in the section entitled ‘Using the Iridescent Glass Kettle’.
After the water has boiled, pour it away. If any slight taste or odour remains
in the boiled water, repeat this process.
Note: When using the kettle for the first time, a slight odour may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the kettle.
The kettle will remain illuminated blue as long as it is plugged in and the
kettle is resting on the base.
Warning: The kettle or any accessories are not suitable for dishwasher
use.
Removing the ‘New Kettle’ Taste
Fill the kettle to the max. fill mark and boil the water, following the
instructions in the section entitled ‘Using the Kettle1 If any slight ‘new
kettle’ taste or odour remains in the boiled water, discard this and refill
the kettle to three-quarters full. Once boiled, odd two tablespoons of
bicarbonate of soda and leave to stand overnight. Discard the water then re-
boil a couple of times to remove any residue.
Instructions for Use
Using the Iridescent Glass Kettle
STEP 1: Position the power base onto a flat, stable, heat-resistant
surface at a height that is comfortable for the user.
STEP 2: Press the lid release button to open the flip-top lid and fill
the kettle to the desired water level. The water level must be between the
min. fill mark and the max. fill mark on the water fill gauge.
STEP 3: Close the flip-lop lid until ii dicks securely shut and place the
kettle back onto the power base.
STEP 4: Plug in and switch on the kettle at the mains power supply, then
push the power switch lo the ‘on’ position until it dicks. The power switch
will automatically flip back into the ‘off’ position when the kettle hos
boiled.
STEP 5: Once the water has stopped boiling vigorously, lift the kettle by
the handle and pour out the desired amount of water. Do not pour the water too
quickly as this may cause it to trickle down the side of the kettle.
Note: The Blue/Red LED ring will illuminate blue as soon as the kettle is
connected to the mains power supply.
The Blue/Red LED ring will illuminate red when the power switch is set to the
‘on’ position.
Caution:
- Allow the kettle to cool thoroughly before touching or opening the flip-top lid.
- Do not use the kettle if the base or any of the electrical connectors are wet. Do not attempt to dry these whilst the kettle is plugged in.
- If the power switch will not stay clicked into the ‘on’ position, do not force it to stay down. This may cause excess steam to escape from the flip-top lid, damage to the automatic shut-off mechanism or injury to the user.
- The body and flip-top lid of the kettle get very hot during use. Do not touch any part of the kettle except the handle whilst it is in use or filled with hot water.
- To avoid spilling water or user injury, wait for vigorous boiling to subside before lifting the kettle or pouring water.
Warning: The flip-top lid may spray water if opened after boiling – allow the kettle to cool before opening the flip-top lid.
Storage
The kettle must be cool, clean and dry before storing in a cool, dry place.
Never wrap the cord tightly around the kettle; wrap it loosely to avoid
causing damage.
Specifications
- Product code: EK284 l lRPPRI
- Input: 220-240 V – 50-60 Hz
- Output: 1850-2200 W
Connection to the Mains
Please check that the voltage indicated on the product corresponds with your
supply voltage.
Important
As the colours in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as
follows:
The wires in the mains lead are coloured in accordance with the following
code:
Blue Neutral (N)
Brown Live (L)
Green/Yellow Earth
FOR UK USE ONLY – Plug fitting details Neutral wire (where applicable).
The wire coloured BLUE is the NEUTRAL and must be connected to the terminal
marked N or coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal
marked L or coloured RED.
The wire coloured GREEN/YELLOW must be connected to the terminal marked with
the letter E or marked
On no account must either the BROWN or the BLUE wire be connected to the
EARTH terminal (
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and
conforming to BS 1362 and be ASTA approved.
If in doubt, consult a qualified electrician who will be pleased to do this
for you.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains
lead and should the fuse need replacing, you must use one that is ASTA
approved (conforming to BS 1362 of the same rating).
If in doubt, consult a qualified electrician who will be pleased to do this
for you.
If you need to remove the plug, DISCONNECT IT FROM THE MAINS, then cut it
off the mains lead and immediately dispose of it safely. Never attempt to
reuse the plug or insert it into a sack.et outlet as there is a danger of an
electric shock.
UP Global Sourcing UK Ltd.,
UK. Manchester OL9 ODD.
Germany. 51149 Koln.
If this product does not reach you in an acceptable condition please contact
our
Customer Services Department at
www.progresscookshop.com.
Please have your delivery note to hand as details from it will be required. If
you wish to return this product, please return it to the retailer from where
it was purchased with your receipt (subject to their terms and conditions).
Guarantee
All products purchased as new carry a manufacturer’s guarantee; the time
period of the guarantee will vary dependent upon the product. Where reasonable
proof of purchase can be provided, Progress will provide a standard 12 month
guarantee with the retailer from the date of purchase. This is only applicable
when products have been used as instructed for their intended, domestic use.
Any misuse or dismantling of products will invalidate any guarantee.
Under the guarantee, we undertake to repair or replace free of any charge any
parts found to be defective. In the event that we cannot provide an exact
replacement, a similar product will be offered or the cost refunded. Any
damages from daily wear and tear are not covered by this guarantee, nor are
consumables such as plugs, fuses etc.
Please note that the above terms and conditions may be updated from time to
time and we therefore recommend that you check these each time you revisit the
website.
Nothing in this guarantee or in the instructions relating to this product
excludes, restricts or otherwise affects your statutory rights.