OSPREY RAPTOR 14 Men’s Mountain Biking Bag Pack Owner’s Manual

OSPREY RAPTOR 14 Men’s Mountain Biking Bag Pack

Product Information:

The Raptor/Raven is a premium mountain bike pack designed for adventures on the trail. It is made with high-quality materials to promote sustainability and care for the environment and people in the supply chain. The pack features a front panel zippered stash pocket and side compression straps that can also carry full face helmets. It includes a HydraulicsTM LT 2.5L reservoir and a tool roll for pre-ride adjustments or post-crash fixes.

Raptor 14 Specs:

• Cubic Inches: 854
• Liters: 14
• Weight: 1.75 lbs. (0.80 kg)
• Dimensions: 19h x 9w x 10d in. (48h x 22w x 25d cm)

Raptor 10 Specs:

• Cubic Inches: 610
• Liters: 10
• Weight: 1.59 lbs. (0.72 kg)
• Dimensions: 19h x 9w x 9d in. (48h x 22w x 23d cm)

Raven 14 Specs:

• Cubic Inches: 854
• Liters: 14
• Weight: 1.63 lbs. (0.74 kg)
• Dimensions: 19h x 9w x 9d in. (48h x 22w x 23d cm)

Raven 10 Specs:

• Cubic Inches: 610
• Liters: 10
• Weight: 1.50 lbs. (0.68 kg)
• Dimensions: 17h x 8w x 9d in. (43h x 21w x 22d cm)

Product Usage Instructions

1. Position the pack: Completely loosen the pack’s hipbelt, harness, and load-lifter straps. Load the pack with 10-20 lb/4-9 kg of gear. Put the pack on and ensure the hipbelt is centered and rests over the hipbone. The hipbelt padding should sit halfway above/below the hipbone.

OUR HOLISTIC APPROACH to sustainability uses high quality materials to lower our impact on the environment, promote a safe chemical process and care for the people in our supply chain.
+ View additional details about the sustainable fabrics included in this product on page 2 and on individual product hangtags at the point of sale.

Welcome to Osprey. We pride ourselves on creating the most functional,durable and innovative carrying products for your adventures. Please refer to this owner’s manual for information on product features, use, maintenance, customer service and warranty.

OVERVIEW

SHARED FEATURES

1. Scratch-free heat-embossed zippered slash pocket for sunglasses and electronics
2. Stretch mesh zippered hipbelt pockets provide on-trail access for small items
3. Hydration sleeve with direct zip access and hose path for easy loading
4. LidLock bike helmet attachment
5. Stretch mesh front pocket for quickly stashing extra gear
6. Blinker light attachment and reflective patch for safety
7. Removable roll-up tool pouch keeps tools handy and organized
8. Lightweight sternum strap magnet for easy access to water
   • Bike tool organization in main compartment
   • Hydraulics LT 2.5L reservoir included

RAPTOR 14 | RAVEN 14 FEATURES

• Front panel zippered stash pocket
• Side compression straps also carry full face helmets

FABRIC

• MAIN bluesign® approved, 100% recycled 210D nylon, DWR treatment made without PFAS
• BOTTOM bluesign® approved, 100% recycled 210D nylon, DWR treatment made without PFAS
• MAIN LINER bluesign® approved, 100% recycled 70D nylon, DWR treatment made without PFAS

PRODUCT PROMISE
A premium mountain bike pack with purpose-built features, the Raptor/Raven keeps you moving on the trail. Should you flat, crash or bonk, smart access to dedicated storage pockets gets you back in the saddle faster. Fully featured, including a Hydraulics™ LT 2.5L reservoir and a tool roll for pre-ride adjustments or post-crash fixes.

SPECS

RAPTOR 14

MENS

• SPECS O/S
• Cubic Inches 854
• Liters 14
• Pounds* 1.75 lbs.
• Kilograms* 0.80 kg.
• Inches 19h x 9w x 10d in.
• Centimeters 48h x 22w x 25d cm.

INCLUDED
Reservoir LT 2.5 L Tool Roll

RAPTOR 10

MENS

• SPECS O/S
• Cubic Inches 610
• Liters 10
• Pounds* 1.59 lbs.
• Kilograms* 0.72 kg.
• Inches 19h x 9w x 9d in.
• Centimeters 48h x 22w x 23d cm.

INCLUDED
Reservoir LT 2.5 L Tool Roll

RAVEN 14

WOMENS

• SPECS O/S
• Cubic Inches 854
• Liters 14
• Pounds* 1.63 lbs.
• Kilograms* 0.74 kg.
• Inches 19h x 9w x 9d in.
• Centimeters 48h x 22w x 23d cm.

INCLUDED
Reservoir LT 2.5 L Tool Roll

RAVEN 10

WOMENS

• SPECS O/S
• Cubic Inches 610
• Liters 10
• Pounds* 1.50 lbs.
• Kilograms* 0.68 kg.
• Inches 17h x 8w x 9d in.
• Centimeters 43h x 21w x 22d cm.

INCLUDED
Reservoir LT 2.5 L Tool Roll

Pack weight does not include reservoir

SUSPENSION/CARRY

• AIRSCAPE™ SUSPENSION
  • Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel
• AIRSCAPE BACKPANEL
  • Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body
• BIOSTRETCH HARNESS
  • New bike-specific winged shoulder strap shape provides comfort and stability
  • Soft breathable spacermesh contact surfaces and diecut foam ventilation
• HIPBELT
  • Airmesh wrap hipbelt with zippered pockets provide stability and breathability

SIZING / FIT

HOW TO MEASURE YOUR TORSO FOR YOUR PACK

• RAPTOR – MEN’S SIZING
  • TORSO O/S 17-21” / 43-53 cm
• RAVEN – WOMEN’S SIZING
  • TORSO O/S 14-18” / 33.5-46 cm

WOMEN’S-SPECIFIC FIT

• Shorter torso length
• Narrower, shorter harness with curves designed to accommodate most women’s necks, shoulders and chests

PACK FIT INSTRUCTIONS

SIZING/FIT DISCLAIMER: Pack depicted in images may not be the pack represented in this owner’s manual.

1. POSITION THE PACK
   Completely loosen the pack’s hipbelt, harness and load-lifter straps (if applicable). Load the pack with 10-20 lb/4-9 kg of gear. Put the pack on and make sure the hipbelt is centered and rests over the hipbone. The hipbelt padding should sit halfway above/below the hipbone.

2. BUCKLE HIPBELT
   Buckle and tighten the hipbelt evenly using Osprey’s cross-body ErgoPull. The padding of the hipbelt should wrap around the hips with approximately 1-3 in/2.5-6 cm of webbing between the buckle and the hipbelt when tightened.

3. HIPBELT ADJUSTMENT
   If the hipbelt is too large and “tops out” or does not offer the preferred amount of coverage, the customer may need a different pack size, model or adjustment.

4. TIGHTEN SHOULDER STRAP
   Tighten the shoulder harness straps by pulling them down and back.

5. TIGHTEN LOAD LIFTERS (IF APPLICABLE)
   Tightening the load lifters will pull the pack close to the body and help stabilize the load. If the torso length on the pack is adjusted correctly, the load lifters will sit between a 30- to 60-degree angle and align naturally with the shoulder straps.

6. CHECK TORSO LENGTH
   Locate the harness yoke – this is where the harness straps come together near the base of the user’s neck. Locate the C7 vertebra – the large protruding bone at the base of the neck. The yoke should be 1 in/2.5 cm – 2 in/5 cm below the C7 vertebra.

7. CHECK HARNESS FIT
   The harness straps should wrap fully around the shoulders with no gaps between the pack and back. The padded part of the shoulder straps should end at 2 in/5 cm or more below the armpits without topping out.

8. HARNESS/SHOULDER STRAP ADJUSTMENT
   If the harness is too small or large, but the torso length of the pack is correct, the customer may need a different pack size, model or adjustment.

9. BUCKLE THE STERNUM STRAP
   The sternum strap should be adjusted to approximately 2 in/5 cm below the collarbone.

FEATURE DETAILS

RESERVOIR SLEEVE
14L / 10L
The dedicated reservoir sleeve is compatible with reservoirs up to 3L.

• An internal hanging loop with buckle ensures proper vertical orientation and stability
• The backpanel hydration exit port is centered, allowing routing to the right or left side of the harness
• Elasticized routing straps on the pack’s harness hold the reservoir hose in place

For more information on Osprey’s full line of reservoirs and reservoir care, visit osprey.com.

RESERVOIR BITE VALVE MAGNET
14L / 10L
The sternum strap magnet allows for quick access to the reservoir bite valve.

LIDLOCK HELMET ATTACHMENT
14L / 10L
Osprey’s LidLock easily and securely carries a bicycle helmet.

1. Locate the LidLock helmet attachment clip near the top of the pack’s front panel and pull away from the pack.
2. In the vertical position, pass LidLock through helmet vent from the bottom and engage in horizontal position.
3. Inside the pack’s front slash pocket is a cord loop to increase or decrease the LidLock’s tension.

SCRATCH-FREE SLASH POCKET
14L / 10L
Scratch-free, heat-embossed zippered slash pocket for sunglasses or electronics.

FULL FACE HELMET CARRY
14L

To attach a full face helmet:

1. Unclip the two upper compression straps.
2. Place the helmet face opening up on the front panel of the pack and thread the two compression straps through the helmet’s face opening.
3. Re-clip the compression strap buckles and tension them to hold the helmet securely to the pack.
4. Clip the helmet’s chinstrap through the blinker light attachment near the base of the front panel for extra carrying stability

BIKE TOOL ROLL
14L / 10L
A removable roll-out tool pouch is integrated into its own zippered lower pocket for quick access. It provides tool organization for bike essentials.

INTERNAL ORGANIZATION
14L / 10L
Organization for essentials and pocketing sized for bike-specific tools and gear.

BLINKER LIGHT ATTACHMENT
14L / 10L

Blinker light attachment and reflective patch for safety.

UPPER COMPRESSION STRAPS AND SHOVE-IT POCKET
14L
A front panel shove-it pocket for quickly stashing gear. The pocket’s upper quick-release compression straps secure a full face or allow for pack compression for added stability.

ZIPPERED HIPBELT POCKET
14L / 10L
On-trail access for small items.

References

• Osprey Home page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>