ULTIMEA U2120 Nova S50 2.1 Channel Virtual Atmos Soundbar User Manual

U2120 Nova S50 2.1 Channel Virtual Atmos Soundbar User Manual
Nova S50

U2120 Nova S50 2.1 Channel Virtual Atmos Soundbar

WE ARE READY TO HELP Prefer iedio tutorial?
Setup guidance video, USER MANUAL or Trouble Shooting on ULTIMEA website. goeoa
@ultimea _official

https://support.ultimea.com/hc/en-us/sections/19482653532185-Nova-S50

+1 888-598-8875 (US)
+49 89-628-25828| Mon-Fn 9am-5pm (PST)
(EU) Mon-Fn 9am-5pm (CET)
---|---

ACCESSORIES LIST

SOUNDBAR CONTROLS

Control Panel

1. “ “: Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “=” Input Mode Press to switch channels: eARC-OPT-BT-AUX-USB.

3. “ ”
   Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone /PC / TV (BT ID: Nova S50).

4. “ – “: Volume Down

5. “ + “: Volume Up

Remote Control

1. “ ”:Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “ “:eARC
   Press to switch to HDMI éARC channel.

3. ‘ ‘BT
   Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC/ TV (BT ID: Nova S50).

4. “: OPT
   Press to switch to OPTICAL channel.

5. “ : AUX
   Press to switch to AUX channel.

6. USB
   Press to to switch to USB channel.

7. “ ” LED
   Press to turn on the LED, press again to turn off.

8. “ + “: Volume Up

9. – Volume Down

10. “ <” Previous
    For BT and USB mode only: Skip to previous track.

11. “ > ” Next
    For BT and USB mode only: Skip to next track.

12. “ ”: Play/ Pause
    For BT and USB mode only.
    USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback.

13. “Movie™: MOVIE
    Press to switch to MOVIE mode.

14. “GaAME”; GAME
    Press to switch to GAME mode.

15. “music”: Music
    Press toswitch to MUSIC mode.

16. ‘BASSMX™
    Press to adjust bass level, the display will show: “ “.

17. “%”: Mute/ Recover the volume.

CONNECT TO SUBWOOFER

CONNECT TO TV VIA HDMI eARC / ARC

Step 1: Connect one end of the HDMI cable to the eARC / ARC port on the back of your TV.
Step 2: Then connect the other end to the HDMI eARC)port of the soundbar.
Step 3: Press “eARC” button on the remote control to select “HDMI(eARC)” input.
Note:
Make sure your TV HDMI supports eARC, otherwise the Dolby Atmos audio signal cannot be transmitted.
Atmos. If you are watching a movie in the Dolby Atmos format, please set the audio output on your TV to Pass Through:
TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through
DTS: If you are watching a movie in the DTS format, please set the audio output on your TV to PCM:
TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
What’s the difference between: HDMI IN, HDMI ARC, HDMI eARC?
HDMI IN is a standard HDMI input that allows you to connect devices to your TV or audio system. It supports audio and video signals, but it does not support audio return charnel (ARC) or enhanced audio return channel (eARC) functionality.
HDMI ARC is a special HDMI port that supports two-way communication between your TV and audio system. This means that audio can be sent from your TV to your audio system. and audio system can send audio back to your TV. HDMI eARC (Enhanced Audio Return Channel) is an updated version of HDMI ARC that supports higher quality audio formats such as Dolby Atmos and DTS: X.
Note: Please turn on the “CEC” function on your TV. When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously:

1. Turn on / off
2. Adjust the volume

CONNECT TO TV VIA OPTICAL / AUX

OPTION 1: OPTICAL

1. Make sure the TV’s port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
2. Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical.
   Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.

OPTION 2: AUX

1. Connect the 3.5mm to 3.5mm Audio Cable to your TV’s AUDIO OUT port.
2. Not support AUDIO IN port on TV.
   Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch to other mode.

In Optical Mode: If there is no sound, try setting the N audio output to PCM: N Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO BLUETOOT

1. Press the “ ” button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “Nova S50” to connect the soundbar.
   Note: If it’s already in the Bluetooth mode and connected, press and hold ” ‘ button for 3 seconds to disconnect the current device and connect to new device manually on your mobile phone I PC / TV.

PLACEMENT OPTIONS

WALL MOUNT INSTALLATION

SPECIFICATION

SAFETY INSTRUCTION
Please read this user manual carefully and save it for future reference.
Do not make unauthorized atterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g. liquid filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use anycorrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessoriress is between 41°F/5°C and 95t/35°C.
• The adapter should be installed near the device and should be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTION
** This mark shown on the product or its packaging, indicates that this product should not be disposed of with other •1Z household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Waste Electrical & Electronic Equipment
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be nixed with other commercial wastes for disposal.
FCC REGULATORY COMPLIANCE**
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tu ming the equipment off and on, the user is encouraged to try to correct the interfer. ence by one or more of the following measures:

• Reorient or relocate the receiving antenna – Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• onsult the dealer or an experienced radio / 1V technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two concitions:

1. This device may not cause harmful Interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20crn between the radiator & your body. This transmitter must not be co-located cr operating in conjunction with any other antenna or transmitter.
Declaration of Conformity
We (Manufacturer is responsible for this declaration) Dynanic (Shenzhen) Technology Limited (Company name) 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000 (Company address) Declare under our sole responsibility that the product
Trade Mark: ULTIMEA
Product Name: Nova S50 2.1 Channel Virtual Atmos Soundbar
Model No.: U2120 To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/ 65/EU) product is responsible to affix CE marking. the following standards were applied:
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
ENIEC 61000-3-2:2019
EN 61000-3-3:2013/A1:2019
ETSIEN 301 489-1 V2.2.3(2019-11)
ETSIEN 301 489-17 V3.2.4(2020-09)
EN 300 328 V2.2.2(2019-07)
EN 50663:2017
ENIEC 62368-1:2020+A11:2020
IEC62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-8:2017
Full Name: Yoyo.Yu
Position: Approbation Manager
Signature: Place/Date: Shenzhen, China/Dec. 25-2022
Trade Marks: Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright 2012-2021 Dolby Laboratories. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners. The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other.

Nova S50 2.1 Channel Virtual Atmos Soundbar Model No.: U2120
**** Dynanic GmbH Buchenring 57, 22359 Hamburg, Germany
UK Crossborder limited 7 Bell Yard London WC2A 2JR, UK United Kingdom
Made in China
Manufacturer: Dynanic (Shenzhen) Technology Limited Address:
20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District. Shenzhen, China 518000 Fe CE RoHS CA
214-230205
If you need our support, kindly reach out to our service team.
We are always glad to help.
+1 888-598-8875 (US) Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU) Mon-Fri 9am-5pm (CET) co
support@ultimea.com
support@ultimea.de
support.ultimea.com
support.ultimea.de

@ultimea_Official

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>