FAQs How does FiberCatcher Work User Manual
- June 4, 2024
- FAQs
Table of Contents
World’s 1st FiberCatcher ™
Technology.
Protects our water sources.
More than one-third of the microplastics in our waterways and oceans come from
synthetic fibers released during wash cycles.
We have launched the World’s 1st washing machine with
FiberCatcher™ technology:
✔ Catches up to 90% of synthetic microfibres during wash cycles
✔ WaterCare® technology reduces drum movements, releasing fewer microfibres
✔ An A energy rating – highest available on a washing machine
GRUNDIG
It starts at home
How does FiberCatcher ™ work?****
– Located in the detergent drawer of the washing machine, the FiberCatcher™ filter captures up to 90% of synthetic miJcrofibres as the water passes through it. It is activated on the synthetic wash cycles shown below:
Once one of these programs is selected, the FiberCatcher ™ LED will illuminate
to show the filter is active
When and how do I buy a new FiberCatcher ™ filter?****
– The filter is designed to last up to 6 months*. Once the filter is full, the
FiberCatcher ™LED will flash when one of the application
programs is selected. When this happens, it is time for a new filter. *
Exact duration is dependent on usage
**Your washing machine will continue to work when the filter is full
– Purchase your replacement filter today from grundig.co.uk/fiber-
catcher
How do I replace my used FiberCatcher™ filter?**
Press the button, then pull the drawer towards you to remove it.
2.**
Lift out the FiberCatcher™ filter.
Replace with a new filter and reinsert the drawer
4.
– Replace with a new filter and reinsert the drawer
Do not wash the used filter, please return it to us using the instructions in
this leaflet.
How do I return my used FiberCatcher ™ filter?****
– The filter isn’t suitable for household recycling, so please return it to us
free of charge, to be recycled, in four easy steps:
– 1. Use the same box that your new filter was delivered in, which will
include a returns label. If the label has been misplaced, if you are returning
your first filter or if you are an
– 2.ROI resident, please email
fibercatcher@grundig.com to request a new
returns label.
– 3. Ensure the filter has had time to dry before sending it, otherwise, the
box may become wet and damaged.
– 4. Attach the returns label to the outside of the box, covering any existing
postage label.
– 5. Post the filter in a post box or at your nearest post office.
What happens to my FiberCatcher ™ filter after it is returned?****
– Filter returned to Grundig
– Filter sent to specialist recycling center
– Recycled plastic used to make new items
Filter returned to GrundigFilter sent to specialist recycling centreRecycled plastic used to make new items
We would love to hear what you think of your FiberCatcher™ washing machine, how you are using it, and the reasons why you purchased it. Please complete the short 3-minute survey by visiting the link below to receive your 2 free FiberCatcher™ filters worth £20 *!Grundig.UK/fiber catcher-survey
*Get 2x FREE
FiberCatcher™
filters worth over £20**