Panasonic TY-SB01SS 3G-SDI SDM Terminal Board Instruction Manual
- June 9, 2024
- Panasonic
Table of Contents
Panasonic TY-SB01SS 3G-SDI SDM Terminal Board
Operating Instructions
- Before connecting, operating or adjusting this product, please read these instructions completely.
- Please keep this manual for future reference.
Safety Precautions
(Be sure to observe.)
WARNING
When mounting or removing this product on or from the flat panel display unit,
be sure to turn the power off, and remove the power plug from the socket.
- Otherwise, electric shock may occur. Never attempt to disassemble or modify this product.
- Doing so may cause fire, electric shock or operation errors. Do not allow the unit to be wet to enter the unit.
- Doing so may cause fire or electric shock. If you sense smoke, unpleasant odour or unusual noises, immediately disconnect the powerplug from the socket.
- Using the product in an abnormal condition may cause fire or electric shock. For mounting or removing this product on or from the flat panel display unit, ask a qualified technician or sales dealer.
- Installing the product improperly may cause a malfunction or electric shock.
CAUTION
Do not place this product in locations subject to greasy fumes, steams, a lot
of moisture or dust.
- The electricity may be conveyed through oil, moisture or dust, resulting in fire. Do not place the product in locations subject to direct sunlight or extremely high temperature.
- The internal parts may be damaged, or fire may occur.
Precautions for use
This product is a 3G-SDI terminal board used by being attached to a Panasonic display. Do not touch this product directly by hand.
- Static electricity may occur, destroying the components. Static electricity is also generated from clothing or human body. Let the static electricity escape by touching metallic objects such as a steel cabinet beforehand.Be sure to use the specified connection cable.
- Otherwise, malfunction or operation errors may occur. The illustrations and figures in this manual are for explanatory purposes and may differ from the actual product.
Terminals
Note
- Use a 5C-FB cable or equivalent to connect to the SDI terminal.
- When performing the active-through output while the LCD display is in standby mode, set [SLOT settings] – [SLOT standby] of the display to [On].
- If CRCC error (page 5) occurs, check the cable to use.
Replacing the terminal board
The replacement instruction below is based on the flat panel display SQ1
series as an example.
For attaching or removing this product to or from the flat panel display unit,
it is recommended to ask a qualified technician or sales dealer. A malfunction
may occur due to static electricity, etc. Consult the sales dealer. Follow the
steps below.
Note
- Be sure to turn off the display unit and connected devices, remove the power plug from the socket, and disconnect the cables from the display.
- When attaching/removing the terminal board, do not allow the metal to damage the back cover or display label.
- Remove the 2 screws, and then remove the slot cover or terminal board from the display unit. To remove the terminal board, hold the handle of the terminal board and pull it out slowly in the arrow direction.
- Insert the terminal board to the main unit slot, and tighten the 2 screws. Fix the terminal board with the 2 screws removed in step 1.
Note
- When replacing another terminal board with this product, the customer shall keep the replaced terminal board for future repair or servicing.
Video signals supported by this product
Supported SDI input signal format chart
Corresponding signal
| ****
Resolution (Dot)
| Scanning frequency| ****
Dot clock frequency (MHz)
| SDI Format| Colour Space| Sampling Structure| Bit Depth
---|---|---|---|---|---|---|---
Horizontal (kHz)
| ****
Vertical (Hz)
| (270M SD-SDI/ 1.5G HD-SDI/
3G Level A/
3G Level B-DL)
| ****
(YCBCR/RGB)
| ****
(4:2:2/4:4:4)
| ****
(8bit/10bit/ 12bit)
480/60i| 720 x 480i| 15.73| 59.94| 13.50| 270M SD-SDI| YCBCR| 4:2:2| 8/10
576/50i| 720 x 576i| 15.63| 50.00| 13.50| 270M SD-SDI| YCBCR| 4:2:2| 8/10
720/50p
| ****
1 280 x 720
| ****
37.50
| ****
50.00
| ****
74.25
| 1.5G HD-SDI| YCBCR| 4:2:2| 8/10
3G Level A/ 3G Level B-DL| YCBCR/RGB| 4:4:4| 8/10
720/60p *1
| ****
1 280 x 720
| ****
45.00
| ****
60.00
| ****
74.25
| 1.5G HD-SDI| YCBCR| 4:2:2| 8/10
3G Level A/ 3G Level B-DL| YCBCR/RGB| 4:4:4| 8/10
1080/50i
| ****
1 920 x 1 080i
| ****
28.13
| ****
50.00
| ****
74.25
| 1.5G HD-SDI| YCBCR| 4:2:2| 8/10
3G Level A/ 3G Level B-DL| YCBCR| 4:2:2| 12
YCBCR/RGB| 4:4:4| 8/10/12
1080/60i *1
| ****
1 920 x 1 080i
| ****
33.75
| ****
60.00
| ****
74.25
| 1.5G HD-SDI| YCBCR| 4:2:2| 8/10
3G Level A/ 3G Level B-DL| YCBCR| 4:2:2| 12
YCBCR/RGB| 4:4:4| 8/10/12
1080/24p *1
| ****
1 920 x 1 080
| ****
27.00
| ****
24.00
| ****
74.25
| 1.5G HD-SDI| YCBCR| 4:2:2| 8/10
3G Level A/ 3G Level B-DL| YCBCR| 4:2:2| 12
YCBCR/RGB| 4:4:4| 8/10/12
1080/25p
| ****
1 920 x 1 080
| ****
28.13
| ****
25.00
| ****
74.25
| 1.5G HD-SDI| YCBCR| 4:2:2| 8/10
3G Level A/ 3G Level B-DL| YCBCR| 4:2:2| 12
YCBCR/RGB| 4:4:4| 8/10/12
1080/30p *1
| ****
1 920 x 1 080
| ****
33.75
| ****
30.00
| ****
74.25
| 1.5G HD-SDI| YCBCR| 4:2:2| 8/10
3G Level A/ 3G Level B-DL| YCBCR| 4:2:2| 12
YCBCR/RGB| 4:4:4| 8/10/12
1080/50p| 1 920 x 1 080| 56.25| 50.00| 148.50| 3G Level A/ 3G Level B-DL|
YCBCR| 4:2:2| 8/10
1080/60p *1| 1 920 x 1 080| 67.50| 60.00| 148.50| 3G Level A/ 3G Level B-DL|
YCBCR| 4:2:2| 8/10
- 1: 1/1.001 is also supported.
SDI Format
- 270M SD-SDI : SD-SDI format with 270 MHz
- 1.5G HD-SDI : HD-SDI format with 1.5 GHz
- 3G LEVEL A : HD-SDI format with 3 GHz LEVEL A
- 3G LEVEL B-DL : HD-SDI format with 3 GHz LEVEL B-DL (DUAL LINK)
Color Space
- YCBCR : Y brightness signal, CB color-difference signal, CR color-difference signal
- RGB : Primary color R/G/B signals
Sampling Structure
- The sampling rate for the Y signal, CB, and CR signals is 4:2:2.
- The sampling rate for Y signal, CB and CR signals (or R/G/B signals) is 4:4:4.
Note
- Closed Captioning (C.C) and Time Code (TC) are not supported for this product.
- An auto detected signal format may be differently displayed from the actual input signal.
Video settings
By installing this product in a compatible display and setting the display’s input to [SLOT], video setting can be made. The setting can be made on [Signal] for the main unit menu.
- [SDI format select] Select the 3G-SDI format.
[Auto]:
Automatically detects the input signal format. [3G 4:2:2 YCBCR 10bit], [3G
4:4:4 YCBCR 10bit], [3G 4:4:4 RGB 10bit], [3G 4:2:2 YCBCR 12bit], [3G 4:4:4
YCBCR 12bit], [3G 4:4:4 RGB 12bit]: If the video is not correctly displayed
because the Payload ID is not superimposed or for other reasons, the above
formats can be selected manually.
Note
- To display HD-SDI or SD-SDI video signal, select [Auto].
- To display 8bit signals, select a corresponding 10bit format.
Input signal display
Display the frequency of the signal currently being input and the type of
signal.
[Status]:
If the input signal has any of the following errors, a message is displayed.
[No ID]
Payload ID has not been superimposed.
[ID]
Payload ID does not match the horizontal / vertical information of SDI signal.
[CRCC]
Displayed when CRCC error occurs due to poor signal quality, etc. (A high-
frequency cable such as 5C- FB may not be used for transmission.)
Audio settings
By installing this product in a compatible display and setting the display’s input to [SLOT], audio setting can be made. The setting can be made on [Sound] for the main unit menu.
[Group select]
Select the audio group multiplexed to the SDI signal.
[Channel 1-8]:
Selects channel 1 to channel 8.
[Channel 9-16]:
Selects channel 9 to channel 16.
[Left channel]
Select the channel of SDI audio to be output to the left channel. When
[Channel 1-8] is selected for [Group select], the channel can be selected from
1 to 8. When [Channel 9-16] is selected for [Group select], the channel can be
selected from 9 to 16.
[Right channel]
Select the channel of SDI audio to be output to the right channel. When
[Channel 1-8] is selected for [Group select], the channel can be selected from
1 to 8. When [Channel 9-16] is selected for [Group select], the channel can be
selected from 9 to 16.
Note
- This product supports the following audio signals.
- 3G-SDI: 48kHz, video synchronization, 16CH compatible
- HD-SDI: 48kHz, video synchronization, 8CH compatible
- SD-SDI: 48kHz, video synchronization, 4CH compatible
- Audio is not output if audio channels to which audio are not multiplexed.
Specifications
| Model No. | TY-SB01SS |
|---|
SDI input / output terminal
3G SDI IN
3G SDI OUT
| 3G SDI IN BNC terminal, 0.8 V [p-p] (75 Ω) (SD-SDI)
Video: Compliance with SMPTE ST 259/ITU-R BT.656 Audio: Compliance with SMPTE ST 272
48 kHz, 20/24 bit, 4CH, video sync (HD-SDI)
Video: Compliance with SMPTE ST 292/274/296 Audio: Compliance with SMPTE ST 299
48 kHz, 20/24 bit, 8CH, video sync (3G-SDI)
Video: Compliance with SMPTE ST 424/425 Audio: Compliance with SMPTE ST 299
48 kHz, 20/24 bit, 16CH, video sync
3G SDI OUT BNC terminal, Active through
Dimensions| Width: 195 mm / 7.7”
Height: 25 mm / 1.0”
Depth: 124.4 mm / 4.9”
Mass| Approx. 160 / 0.4 lbs net
Customer’s Record
The model number and serial number of this product may be found on its rear
panel. You should note this serial number in the space provided below and
retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for
Warranty Service purposes.
Panasonic Connect North America Unit of Panasonic Corporation of North America
Executive Office :Two Riverfront Plaza, Newark, New Jersey 07102 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Authorized Representative in EU: Panasonic Connect Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Importer for UK: Panasonic Connect UK, a branch of Panasonic Connect Europe GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT
Panasonic Connect Co., Ltd
4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Web Site:
https://panasonic.net/cns/prodisplays/
References
- パナソニック業務用ディスプレイサポートセンター業務用ディスプレイサポートセンター-業務用ディスプレイ - パナソニック コネクト
- Professional Displays | Panasonic Global