Smart things s52 Black 11 Inch Wall Mount Charging Station Instruction Manual
- June 15, 2024
- Smart Things
Table of Contents
Smart things s52 Black 11 Inch Wall Mount Charging Station
Specifications
- Compatible with : iPad Air, iPad mini 4, iPad Air 2, iPad Pro 9.7, iPad Pro 12.9
- Materials: High-quality materials
- Mounting: Wall mount
- Power supply : Can be connected to the power supply out of the wall
- Cleaning: Use a microfiber cloth or soft, damp cloth
Product Usage Instructions:
Safety Instructions:
Handle the stock Fix with care and read the mounting and operating
instructions thoroughly to avoid mistakes.
Correct Use:
Use the product only with approved Apple products, cables, and chargers.
Avoid extreme environmental conditions.
Mounting:
Ensure the wall can support the product’s weight. Use appropriate fixing
items for different wall materials.
Power Supply out of the Wall:
A professional electrician is required for installation. Ensure proper air
supply to prevent overheating.
Maintenance
Clean with a microfiber or soft, damp cloth. Disconnect all cables before
cleaning.
INSTALLATION INSTRUCTION
For the latest electrical and gluing information please visit: www.smart- things.com/sDockFix
Instructions for use
Congratulations!
You have purchased the smart things sDock Fix wall mount.
We put a lot of effort into the development and have selected only materials
of the highest quality. The production of our products is subject to strict
quality controls. However, in case you should detect material or manufacturing
defects, please contact the retailer where you have purchased the product.
We hope that you will thoroughly enjoy our product.
Safety Instructions
Handling the sDock Fix is very easy. However, we would like to ask you to take
a moment to read the mounting and operating instructions carefully to avoid
mistakes. For latest informations please visit www.smart-things.com
Correct Use
Please use this product only with these Apple products together with the
cables and chargers approved by Apple. The sDock Fix wall mount was developed
for the use in environmental conditions normally found in private homes and
office buildings. Please avoid positioning the product in areas with high
exposure to sun radiation, extremely warm or cold temperatures, high humidity
or moisture.
Mounting
Make sure that the wall has sufficient bearing capacity for mounting the
product. Please note that the wall fixing has to carry a multiple of the wall
mount’s weight. Depending on the wall materials it could be necessary to use
special fixing items (e.g. cavity fixing, etc.).
For latest informations please visit www.smart-things.com/sDockFix
Take extra caution not to damage gas or water pipes or electric wiring in the wall!
Power supply out of the wall
- sDock Fix allows a power supply out of the wall. Only a professional electrician is allowed to make such an installation.
- Take care that the power supply in any case has enough air supply. Overheating may cause fire!
Attention!
The Apple power supply delivered with the iPad is not approved for use in a
wall box. Fire danger!
Maintenance
- Clean your sDock Fix with a micro fiber cloth or a soft, damp cloth. Never use aggressive cleaning substances.
- Attention! Please detach all cables before you clean it.
MORE INFORMATION
smart things solutions GmbH Schulstraße 29
82234 Weßling, Germany www.smart-things.com
FAQ
- Q: Can I use this wall mount with any iPad model?
- A: No, this wall mount is compatible only with specific iPad models listed in the specifications.
- Q: Can I clean the sDock Fix with harsh cleaning chemicals?
- A: No, only use a microfiber or soft, damp cloth for cleaning to avoid damaging the product.
- Q: Can I mount this product on any type of wall?
- A: It is essential to ensure that the wall has sufficient bearing capacity and use appropriate fixing items based on the wall material.