LEDCO 2063 Virgo LED Wall Lamp Instructions
- June 12, 2024
- LEDCO
Table of Contents
LEDCO 2063 Virgo LED Wall Lamp
Product Information
The product is a collection of ceiling and wall lamps, suitable for indoor and
outdoor use. The lamps have an IP65 rating, indicating their resistance to
dust and water. The lamps come with different connection options, including
neutral wires (blue), phase wires (brown/black), and ground wires
(green/yellow). The lamps are designed to be mounted on surfaces such as walls
or ceilings.
Product Usage Instructions
- Before installation, ensure that the lamp is connected by a qualified person.
- Refer to the provided illustrations for the correct mounting procedure.
- Note that lamps with an IP20 rating should not be used outdoors.
- Avoid installing the lamp on easily flammable surfaces like wood or carpet.
- Do not attach the lamp to damp or freshly painted surfaces.
- Connect the lamp wires to the corresponding wires of the wall or ceiling. Use the following color coding: PE or = green/yellow (ground wire), N = blue (neutral wire), L = brown (black) (phase wire).
- Ensure that the chosen fixation system can support the weight of the lamp.
- Avoid placing the wires and connections near heat sources.
- Take care not to damage the wiring during the drilling or fixing process.
- Always use the correct type of bulb as specified on the label.
- Keep these instructions in a safe place for future reference.
- Use the provided sleeves to cover the main supply wiring to the fitting.
- Cleaning should be limited to outer surfaces, shades, protective glass, reflectors, and covers. Avoid moisture entering the terminal compartment or reaching any live parts. For gold and brass finishing lamps, use a soft cloth without any cleaning agents.
Explanation of Protection Classes
There are two protection classes for the lamps:
- Protection Class I: These lamps have an earth terminal, and the earth wire (yellow and green) must be connected to the indicated terminal.
- Protection Class II: These lamps are double insulated and should not be connected to an earth wire.
Note: LED lamps with non-replaceable systems are used in all technological LED lamps.
A cracked safety glass lampshade must be replaced
Technical data: see fixture label
This product contains a light source of the energy efficiency class
SAFETY INSTRUCTIONS
-
Electrical appliances must only be connected by qualified persons.
-
Important! Before starting installation work disconnect the main cable from the power supply – remove fuse or turn the switch to «OFF». The power supply connection must be done with a suitable connecting box, as seen on the illustrations.
-
The lamps with an index of protection 20 (IP20) cannot be used outdoors.
-
Lamps marked with the symbol may not be installed on easily flammable surfaces such as: wood, or carpet.
-
Do not attach lamps on surfaces that are damp, freshly painted, or otherwise electrically conductive.
-
Connect the wires of the lamp with the same color like the wires of the wall or the cell. PE or = green/yellow = ground wire. N =blue=neutral wire. L=brown (black) = phase.
-
Use the fixation system according to the weight of the lamp.
-
Keep away the wires and connections from heat sources.
-
Make sure that the wiring is not damaged during de drilling /fixing procedure.
-
Be sure to always use the correct type of bulb (see information on the label!).
-
Keep these instructions in a safe place.
-
Use the sleeves to cover the main supply wiring to the fitting.
-
Cleaning is limited to the outer surfaces, shades or protective glass, reflectors and covers. It is important to ensure that no moisture enters the terminal compartment or reaches any live parts!. Gold and brass finishing lamps can be cleaned
only with a soft cloth (do not use cleaning agents of any kind). -
Use low-pressure halogen lamps with low ultraviolet radiation (UV-STOP).
-
Suitable only for indoor use, at 25ºC
EXPLANATION OF PROTECTION CLASSES
Protection class I: This lamp has an earth terminal. The earth wire (yellow
and green) must be connected to the terminal indicated by the symbol.
Protection class II: This lamp is double insulated and must not be connected
to earth wire.
All the technological LED lamps are constructed with Led systems that cannot
be replaced.
STAMP OF THE COMPANY
The manufacturer guarantees the proper functioning of this equipment, repairs or spare parts of the model owing to faulty manufacture during years after the surrender date. Responsibility will not be accepted, however, for damages or injury caused through misuse, For any claims the sale ticket must be presented. The company agrees to repair any defect or malfunction found in the item and any damages said defect or malfunction might directly provoke. If the repair should fail to satisfy the customer and/or the object fail to present the optimum condition for the use to which it is destined the guarantee holder will have the right to the substitutability of the acquired item for another of identical characteristics or a complete refund of the purchase price.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>