LEDCO 35-50W T-Line LED Linear Track Light Instruction Manual

LEDCO 35-50W T-Line LED Linear Track Light

Safety notes

• Installation must be performed only by a qualified electrician.
• Make sure that the fixture is disconnected from the AC supply.
• This luminaire is to be installed in 3-wires/1-phases or 4-wires/3-phases or 6-wires/3-phases DALI track rails.

Features

• Perfect solution for the retail business, shops, and supermarkets.
• Excellent quality with high efficiency up to 1601m/W.
• Four selectable powers with DIP switch.
• Flexible position of the luminaire in the rail by sliding left or right.

1. Ground point
2. Adaptor knob
3. Phase selector
4. Ground pin
5. Power selector
6. LED driver
7. DALI adaptor
8. Wires box
9. Fixing lock
10. Fixing knob
11. End cap
12. Track rail
13. Suspension kit

Step 1
Set the power in the 5  power selector DIP switch.

Step 2
Choose the phase/circuit in the 3 phase selector DIP switch.

Step 3
Insert the T-line luminaire into the 12 track rail with the correct direction.

Step 4
Lock the luminaire with the 2 adaptor knob and the 10 fixing knob by rotating the knobs clockwise.

How to avoid the track rail joints during installation

• There are 4 movable positions for the LED driver in the T-line luminaire.
• There are 2 movable position of the fixing lock in the T-line luminaire.
• If the 12 track rail joint interferes with the position of the 9 Fixing lock, follow the instruction of Step1.
• If the 12 track rail joint interferes with the position of the 6) LED driver, follow the instructions from Step 2 to Step 5.

Step 1
Slide the 9 fixing lock left or right to the second position to avoid the 12 track rail joint.

Step 2
Expose the wires in the 8 wires box by moving it to the right.

Step 3
Slide the 6 LED driver left or right to a free position.

Step 4
Slide the 8 wires box near the 6 LED driver.
Tidy up the wires and hide them by sliding the 8 wires box back.

Step 5
Install the T-Line luminaire into the 2 track rail.

Track rail

• 3-wires/1-phases
• 4-wires/3-phases
• 6-wires/3-phases

Recommend track rail brands

• Pay attention to the positioning knob. No Reverse Mount!
• Improper installation may cause irreparable damage.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>