LEDCO ICON LED Wall Lamp Instructions

: June 12, 2024
: LEDCO

Table of Contents

LEDCO ICON LED Wall Lamp
Product Information
Product Usage Instructions
icon
CONNECTION TO THE NETWORK
SUJECTION TO THE CEILING/WALL
SAFETY INSTRUCTIONS
STAMP OF THE COMPANY
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LEDCO ICON LED Wall Lamp

Product Information

This product is a wall lamp or applique that can be used for indoor lighting. It is available in various colors and finishes, including blue, brown, black, and gold/brass. The lamp is designed with different protection classes, either protection class I (with an earth terminal) or protection class II (double insulated). The lamp may also feature LED technology, which means the LED systems are not replaceable.

Product Usage Instructions

Before installation, ensure that only qualified personnel handle the electrical connections.
Refer to the provided illustrations for the correct mounting procedure.
Do not use the lamp outdoors if it has an index of protection 20 (IP20).
Avoid installing the lamp on easily flammable surfaces such as wood or carpet.
Avoid attaching the lamp to damp, freshly painted, or electrically conductive surfaces.
Connect the wires of the lamp with the same color as the wires of the wall or ceiling. Green/yellow wires are for ground, blue wires are for neutral, and brown/black wires are for phase.
Use a fixation system appropriate for the weight of the lamp.
Keep the wires and connections away from heat sources.
Ensure that the wiring is not damaged during the drilling or fixing procedure.
Always use the correct type of bulb as indicated on the label.
Store these instructions in a safe place for future reference.
Use sleeves to cover the mains supply wiring to the fitting.
Clean only the outer surfaces, shades, protective glass, reflectors, and covers. Do not use cleaning agents on gold and brass finishing lamps.

Note: It is important to follow the instructions specific to your product model as indicated by the provided labels and symbols.

icon

$LEDCO-ICON-LED-Wall-Lamp-FIG-1 $2$$

A cracked safety glass lampshade must be replaced.

CONNECTION TO THE NETWORK

SUJECTION TO THE CEILING/WALL

$LEDCO-ICON-LED-Wall-Lamp-FIG-1 $1$$

Technical data: see fixture label
Inglés: This product contains a light source of the energy efficiency class F

SAFETY INSTRUCTIONS

Electrical appliances must only be connected by qualified persons.
Important! Before starting installation work disconnect the main cable from the power supply – remove the fuse or turn the switch to «OFF». The power supply connection must be done with the suitable connecting box, as seen on illustrations.
The lamps with index of protection 20 (IP20) cannot be used outdoors.
Lamps marked with the symbol may not be installed on easily flammable surfaces such as wood, or carpet.
Do not attach lamp on surfaces which are damp, freshly painted, or otherwise electrically conductive.
Connect the wires of the lamp with the same color like the wires of the wall or the cell. PE or = green/yellow = ground wire. N =blue=neutral wire. L=brown (black) = phase.
Use the fixation system according to the weight of the lamp.
Keep away the wires and connections from heat sources.
Make sure that the wiring is not damaged during de drilling /fixing procedure.
Be sure to always use the correct type of bulb (see information on the label!).
Keep these instructions in a safe place.
Use the sleeves to cover the main supply wiring to the fitting.
Cleaning is limited to the outer surfaces, shades or protective glass, reflectors and covers. It is important to ensure that no moisure enters the terminal compartment or reaches any live parts!. Gold and brass finishing lamps can be cleaned only with a soft cloth (do not use cleaning agents of any kind).
Use low-pressure halogen lamps with low ultraviolet radiation (UV-STOP).
Suitable only for indoor use, at 25ºC.

EXPLANATION OF PROTECTION CLASSES:

Protection class I: This lamp has an earth terminal. The earth wire (yellow and green) must be connected to the terminal indicated by the symbol.
Protection class II: This lamp is double insulated and must not be connected to earth wire.
All the technological LED lamps are constructed with Led systems that cannot be replaced.

STAMP OF THE COMPANY

The manufacturer guarantees the proper functioning of this equipment, repairs or spare parts of the model owing to faulty manufacture during 3 years after the surrender date. Responsibility will not be accepted, however, for damages or injury caused though misuse, For any claims the sale ticket must be presented. The company agrees to repair any defect or malfunction found in the item and any damages said defect or malfunction might directly provoque. If the repair should fail to satisfy the customer and/or the object fail to present the optimum condition for the use to which it is destined the guarantee holder will have the right to the substitution of the acquired item for another of identical characteristics or a complete refund of purchase price.