DEWERT OKIN CB1220 Comfort Control Box for Adjustable Bed with Remote Control Instructions

June 12, 2024
DEWERT OKIN

Issuing Department :Bedding Division
Functional test instruction
RF.60.10.01 Functional test instruction
Creation Time 2023-2-15
Creator Gary
No: Vision 1.0

Design change record

Date Vision Release Note Author Approver
Signature Post
2023-2-21 V1.0 Draft Gary

Test Production

Test Model:RF60
Product Code:RF. 61.10.01
Software Version:V1.0

Test Model:CB1220
Product Code:CB.12.20.02
Hardware Version:R6.210.00.530EC
Software Version:SWRF.12.20.02-
Fix Bluetooth Issues 20200120

Test configuration list

Name| ORE Product Model| Reference
quantity
---|---|---
Head driver| B11359| 2
Foot driver| B11360| 2
DC Power cord| R5.216.01.055| 2
AC Power cord| R5.522.01.250| 2
Tap lights| R5.113.00.067| 2
Sync cord| R5.408.00.002| 1
Bluetooth
plug-in| | 1
power adapter| JLDP.10.023.000| 2

Test Procedure

1.1. Power on the code pair

When the system is powered on, the control box The blue LED indicator is steady on, the light strip blinks, and enters the code matching state. Run once Alignment key,Green LED indicator light is on, the light belt is off, and it enters the normal working state. In the normal working state, long press the code key motor reset, let go of the motor stop.
1.2. Code test procedure

  1. For wired synchronization, double click on the control box KEY,When the blue LED light is on and the light belt is blinking, long press the head up and head down buttons on the remote control, the backlight light of the remote control will blink. When the blue LED of the control box is off, the green LED light is on, and the light belt is not blinking, the backlight light of the remote control is on, it indicates that the code is successfully verified.
  2. For wireless synchronization, double click on the other control box KEY,When the blue LED light is on and the light belt is blinking, long press the foot up and foot down buttons on the remote control, the backlight indicator of the remote control will blink.
    When the blue LED of the control box is off, the green LED is on, but the light belt is not blinking, and the backlight indicator of the remote control is on, it indicates that the code matching is successful.
    Note: Wireless synchronization needs to be completed in step 1 and 2, and wired synchronization only needs to be completed in step 1. Wireless synchronization of the last step of the operation, as long as you press any key on the remote control, the corresponding action from the control box can be.

1.3. Head drive extension test
Click the head up button and hold it, the head driver is extended, and the action stops when you release the button;
1.4. Head drive recovery test
Click the head down button and hold it, the head drive will be withdrawn, and the action will stop when you release the button.
1.5. Foot driver extension test
Click the “foot up” button and hold it, the foot driver is extended, and the action stops when you release the button;
1.6. Foot drive recovery test
Click the “foot down” button and hold it, the foot drive will be recovered, and the action will stop when you release the button.
1.7. FLAT test
Click the flat button, the head and foot drive synchronously run to the highest position, press any key to stop the action;
1.8. ZERO G Position Test
Click the zero button, the head and foot drivers run synchronously to the preset ZERO G position, and the action will stop when pressed by any key;

| Head driver| Foot driver|
---|---|---|---
Journey| 6200ms| 7300ms|

1.9. M1 Position Test
Click M1 button, head and foot drive synchronously run to the preset M1 position, press any key to stop the action;

| Head driver| Foot driver|
---|---|---|---
Journey| 4000ms| 10000ms|

1.10. M2 Position Test
Click the M2 button, the head and foot drive synchronously run to the preset M2 position, and the action will stop when pressed by any key;

| Head driver| Foot driver|
---|---|---|---
Journey| 6000ms| 14000ms|

1.11. Light belt test

Click Light belt button, light belt on, then click the light belt button, light belt off.
Light on delay 5 minutes to turn off (sample a test 5 minutes to turn off).
1.12. ZERO G location rememory test
Run the head and foot driver to the appropriate position, long press the zeroG button for 5s until the backlight led of the remote control flashes for about 1 second, and the control box will set the current memory position to the zeroG position; Run the drive to another location, and operating zeroG will return to the set location.
1.13. M1 location rememory test
Run the head and foot driver to the appropriate position, long press the M1 button for 5s until the remote control backlight led flashes for about 1 second, and the control box will set the current memory position to M1 position; Run the drive to another position, and operation M1 will return to the set position.
1.14. M2 location rememory test
Run the head and foot driver to the appropriate position, long press the M2 button for 5s until the backlight led of the remote control flashes for about 1 second, and the control box will set the current memory position to the M2 position; Run the drive to  another position, and operation M2 will return to the set position.
1.15. Memory location is restored to factory Settings
Press and hold the ZERO and FLAT keys for 5s at the same time until the backlight led of the remote control flashes, and the control box restores the zeroG memory position to the factory setting position;
1.16. Synchronous testing
Wire synchronization, after connecting the synchronization line, operate the motor and lamp belt, and the motor can work normally in sync (from 2.3 to 2.15 step test); Wireless synchronization, the distance between the two control boxes is not more than 5 meters, the operation of the motor, the lamp belt can work normally.
Note: When the memory position is called from the FLAT position, the motor can run normally to the theoretical Angle or theoretical stroke, and the error range is not more than 3° or 5mm; When pressing the button, the backlight indicator of the remote control is steady on indicating the configuration of the driver for reference only
1.17. Standby power consumption
Less than 10uA
1.18. Flashlight test
Press and hold the flashlight button to open, open and close the flashlight
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.
ISED RSS Warning:

This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Made by:  Checked by: Confirmed by:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals