DEWERT OKIN RF427A Remote Control Instructions

: June 8, 2024
: DEWERT OKIN

DEWERT OKIN RF427A Remote Control

Item

Child Lock 1

Click the Child Lock button for 3 second to lock or unlock the remote.

Bed lamp 2

Click the bed lamp button to open or shut the light under the bed.

Antisnore 3

Click the Antisnore button, the bed moves to Antisnore position, press and hold Antisnore button for 5s, until backlight flashes, the control set the current position as Antisnore position

TV 4

Click the TV button, the bed moves to TV position, press and hold TV button for 5s, until backlight flashes, the control set the current position as TV position.

LUMBAR UP 5

Press and hold LUMBAR UP button, Lumbar actuator moves out, stop when released.

LUMBAR DOWN 6

Press and hold LUMBAR DOWN button, Lumbar actuator moves in, stop when released.

M1 7

Click the M1 button, the bed moves to M1 position, press and hold M1 button for 5s until backlight flashes, the control set the current position as M1 position

M2 8

Click the M2 button, the bed moves to M2 position, press and hold M2 button for 5s until backlight flashes, the control set the current position as M2 position

HEAD UP 9

Press and hold HEAD UP button, head actuator moves out, stop when released.

HEAD DOWN 10

Press and hold HEAD DOWN button, head actuator moves in, stop when released.

FOOT UP 11

Press and hold FOOT UP button, foot actuator moves out, stop when released.

FOOT DOWN 12

Press and hold FOOT DOWN button, foot actuator moves in, stop when released.

ZG 25

Click the ZG button, the bed moves to zeroG position, press and hold zeroG button for 5s,
until backlight flashes, the control set the current position as zeroG position

HEAD MASSAGE 14

Click the HEAD MASSAGE button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3

MASSAGE model 13

Click the MASSAGE MODEL button to change the massage model.

FOOT MASSAGE 15

Click the FOOT MASSAGE button, foot massage motor switches massage intensity, massage intensity switches among 0-1-2-3

FLAT 24

Click the FLAT button, the bed goes flat.

MASSAGE FREQUENT 28Hz 16

Click the 28Hz button to set the massage frequent 28Hz.

MASSAGE FREQUENT 40Hz 17

Click the 28Hz button to set the massage frequent 40Hz.

Left Fan without heat 18

Click the Left Fan without heat button, Left Fan switches intensity, Fan intensity switches among 0-1-2-3；

Left and right Fan without heat 19

Click the Left and right Fan without heat button, Left and right Fan switches intensity, Fan intensity switches among 0-1-2-3；

Right Fan without heat 20

Click the right Fan without heat button, right Fan switches intensity, Fan intensity switches among 0-1-2-3；

Left Fan with heat 21

Click the Left Fan with heat button, Left Fan switches intensity, Fan intensity switches among 0-1-2-3；

Left and right Fan with heat 22

Click the Left and right Fan with heat button, Left and right Fan switches intensity, Fan intensity switches among 0-1-2-3；

Right Fan with heat 23

Click the right Fan with heat button, right Fan switches intensity, Fan intensity switches among 0-1-2-3；

FCC Statement：

This device complies with part 15 of the FCC rules. Operation is subject to the following two cond itions: (1) this device may not cause harmful interference, and (2) this device must accept any int erference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could v oid the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructi ons, may cause harmful interference to radio communications. However, there is no guarantee th at interference will not occur in a particular installation. If this equipment does cause harmful int
erference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

ISED Statement

This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interferen ce, and (2) This device must accept any interference, including interference that may cause u ndesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This radio transmitter (ISED certification number: 22406-RF408A) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.