Samsara CBL-VG-COBDII-Y1/Y2 Vehicle Light Gateway Cable Installation Guide

Samsara CBL-VG-COBDII-Y1/Y2 Vehicle Light Gateway Cable

CBL-VG-COBDII-Y1/Y2

PACKAGE CONTENT

INSTALLATION INSTRUCTIONS

1. Locate vehicle’s diagnostic port and detach it from its original location.
   

2. Connect the Samsara cable. Vehicle’s diagnostics remain accessible via the unconnected port.
   

3. Fasten unconnected diagnostics port to vehicle’s original port location.
   

4. Plug the Samsara cable gateway connector into the gateway. It will click when fully inserted.
   

5. Fasten connected gateway in a secure position. Verify the gateway indicator light turns green, this could take 1-3 minutes.
   

samsara.com/support

Documents / Resources

| Samsara CBL-VG-COBDII-Y1/Y2 Vehicle Light Gateway Cable [pdf] Installation Guide
CBL-VG-COBDII-Y1 Y2 Vehicle Light Gateway Cable, CBL-VG-COBDII-Y1 Y2, Vehicle Light Gateway Cable, Light Gateway Cable, Gateway Cable
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>