cincoze CS-100 Series Convertible Touch Monitor User Manual

cincoze CS-100 Series Convertible Touch Monitor

Preface Revision

Copyright Notice

© 2021 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified, or reproduced in any form or by any means for commercial use without the prior written permission of Cincoze Co., Ltd. All information and specification provided in this manual are for reference only and remain subject to change without prior notice.

Acknowledgement
Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective owners.

Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject to change without notice. It does not represent a commitment on the part of Cincoze. This product might include unintentional technical or typographical errors. Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Declaration of C

FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CE
The product(s) described in this manual complies with all application European Union (CE) directives if it has a CE marking. For computer systems to remain CE compliant, only CE compliant parts may be used. Maintaining CE compliance also requires proper cable and cabling techniques

Product Warranty Statement

Warranty
Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and workmanship for 2 years (2 Years for PC Module, 1 Year for Display Module) from the date of purchase by the original purchaser. During the warranty period, we shall, at our option, either repair or replace any product that proves to be defective under normal operation. Defects, malfunctions, or failures of the warranted product caused by damage resulting from natural disasters (such as by lightening, flood, earthquake, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances, plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, and the product in question is either software, or an expendable item (such as a fuse, battery, etc.), are not warranted.

RMA
Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain an RMA number from us. Our staff is available at any time to provide you with the most friendly and immediate service.

• RMA Instruction
  Customers must fill in Cincoze Return Merchandise Authorization (RMA) Request Form and obtain an RMA number prior to returning a defective product to Cincoze for service.

• Customers must collect all the information about the problems encountered and note anything abnormal and describe the problems on the “Cincoze Service Form” for the RMA number apply process.

• Charges may be incurred for certain repairs. Cincoze will charge for repairs to products whose warranty period has expired. Cincoze will also charge for repairs to products if the damage resulted from acts of God, environmental or atmospheric disturbances, or other external forces through misuse, abuse, or unauthorized alteration or repair. If charges will be incurred for a repair, Cincoze lists all charges, and will wait for customer’s approval before performing the repair.

• Customers agree to ensure the product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or equivalent.

• Customers can be sent back the faulty products with or without accessories (manuals, cable, etc.) and any components from the system. If the components were suspected as part of the problems, please note clearly which components are included. Otherwise, Cincoze is not responsible for the devices/parts.

• Repaired items will be shipped along with a “Repair Report” detailing the findings and actions taken.

Limitation of Liability
Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original selling price of the product. The remedies provided herein are the customer’s sole and exclusive remedies. In no event shall Cincoze be liable for direct, indirect, special or consequential damages whether based on contract of any other legal theory.

Technical Support and Assistance

1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about the product.
2.  Contact your distributor or our technical support team or sales representative for technical support if you need additional assistance. Please have following information ready before you call:

• Product name and serial number
• Description of your peripheral attachments
• Description of your software (operating system, version, application software, etc.)
• A complete description of the problem
• The exact wording of any error messages

Conventions Used in this Manual

Safety Precautions

Before installing and using this device, please note the following precautions.

1. Read these safety instructions carefully.

2.  Keep this User’s Manual for future reference.

3.  Disconnected this equipment from any AC outlet before cleaning.

4.  For plug in equipment, the power outlet socket must be located near the equipment and must be easily accessible.

5.  Keep this equipment away from humidity.

6.  Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.

7. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.

8. Use a power cord that has been approved for using with the product and that it matches the voltage and current marked on the product’s electrical range label. The voltage and current rating of the cord must be greater than the voltage and current rating marked on the product.

9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11.  If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.

12.  Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
    If one of the following situations arises, get the equipment checked by service personnel:

    • The power cord or plug is damaged.
    • Liquid has penetrated into the equipment.
    • The equipment has been exposed to moisture.
    • The equipment does not work well, or you cannot get it work according to the user’s manual.
    •  The equipment has been dropped and damaged.
    •  The equipment has obvious signs of breakage.

14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

15.  Equipment intended only for use in a RESTRICTED ACCESS AREA.

Package Contents
Before installation, please ensure all the items listed in the following table are included in the package

CS 108C R10

CS 110HC R10

CS 112HC R10

CS-115C- R10

CS-W115FHC- R10

CV-117C- R10

Note: Notify your sales representative if any of the above items are missing or damaged.

Ordering Information

Display Module with Projected Capacitive Touch

Projected Capacitive Touch
**** CS-110HC-R10| 10.4″ TFT-LCD 1500 nits XGA 4:3 Display Module with Projected Capacitive Touch
CS-112HC-R10| 12.1″ TFT-LCD 1500 nits XGA 4:3 Display Module with Projected Capacitive Touch
CS-115C-R10| 15″ TFT-LCD 1600 nits XGA 4:3 Display Module with Projected Capacitive Touch
CS-W115FHC-R10| 15.6″ TFT-LCD 1500 nits Full HD 16:9 Display Module with Projected Capacitive Touch
CS-117C-R10| 17″ TFT-LCD 1500 nits SXGA 5:4 Display Module with Projected Capacitive Touch

Overview
CS 100 Series is TFT LCD touch display module. It offers ultra high brightness and high resolution, allowing viewers to see clear images even under any bright ambient light or direct sunlight environments. CS 100 Series is a rugged and reliable display solution featuring wide range operating temperature 20°C to 70°C, a solid aluminum die casting front bezel and true flat IP65 front panel protection. Supporting Convertible Display System (CDS) technology, CS 100 Series allows you to configure, upgrade and maintain your display system according to your need.

Key Features

• 8.4”~17” TFT-LCD with Ultra High Brightness and High Resolution
• Wide Range Operating Temperature -20°C to 70°C
• True Flat IP65 Front Panel Protection
• Rugged Aluminum Die-casting Bezel
• Convertible Display System (CDS) Technology Supported

Hardware Specification

C S 108C R10
Display

• LCD Size: 8.4″ (4:3)
• Max. Resolution: 800 x 600
• Brightness (cd/m2): 1600
• Contrast Ratio: 600 : 1
• LCD Color: 16.2M
• Pixel Pitch (mm): 0.213 (H) x 0.213 (V)
• Viewing Angle (H V): 160 / 140
• Backlight MTBF: 50000 hrs (LED Backlight) Touch
• Projected Capacitive Touch Physical
• Dimension (WxHxD): 262 x 186.2 x 56.2 mm
• Weight: 1.58 kg
• Front Panel Construction: Flat Rugged Aluminum Die casting Bezel Environment
• Operating Temperature: 20°C to 70°C
• Storage Temperature: 20°C to 70°C
• Relative Humidity: 85% RH @ 40°C (non condensing)
• IP Level: IP 65 Compliant Front Panel Certification
• CE
• FCC Class A

External Layout

Dimension

C S 110 H C R10
Display

• LCD Size: 10.4″ (4:3)
• Max. Resolution: 1024 x 768
• Brightness (cd/m2): 1500
• Contrast Ratio: 1400 : 1
• LCD Color: 16.2M
• Pixel Pitch (mm): 0.206 (H) x 0.206 (V)
• Viewing Angle (H V): 178 / 178
• Backlight MTBF: 50000 hrs (LED Backlight) Touch
• Projected Capacitive Touch Physical
• Dimension (WxHxD): 295 x 227.3 x 56.2 mm
• Weight: 2.24 kg
• Front Panel Construction: Flat Rugged Aluminum Die casting Bezel Environment
• Operating Temperature: 20°C to 70°C
• Storage Temperature: 20°C to 70°C
• Relative Humidity: 80% RH @ 40°C (non condensing)
• IP Level: IP 65 Compliant Front Panel Certification
• CE
• FCC Class A

External Layout

Dimension

C S 11 2 HC R10
Display

• LCD Size: 12.1″ (4:3)
• Max. Resolution: 1024 x 768
• Brightness (cd/m2): 1500
• Contrast Ratio: 700 : 1
• LCD Color: 16.2M
• Pixel Pitch (mm): 0.24 (H) x 0.24 (V)
• Viewing Angle (H V): 160 / 160
• Backlight MTBF: 30000 hrs (LED Backlight) Touch
• Projected Capacitive Touch Physical
• Dimension (WxHxD): 345 x 265.3 x 57 mm
• Weight: 3.16 kg
• Front Panel Construction: Flat Rugged Aluminum Die casting Bezel Environment
• Operating Temperature: 20°C to 70°C
• Storage Temperature: 20°C to 70°C
• Relative Humidity: 80% RH @ 40°C (non condensing)
• IP Level: IP 65 Compliant Front Panel Certification
• CE
• FCC Class A

External Layout

Dimension

C S 11 5 C R10
Display

• LCD Size: 15″ (4:3)
• Max. Resolution: 1024 x 768
• Brightness (cd/m2): 1600
• Contrast Ratio: 800 : 1
• LCD Color: 16.2M
• Pixel Pitch (mm): 0.297 (H) x 0.297 (V)
• Viewing Angle (H V): 160 / 150
• Backlight MTBF: 50000 hrs (LED Backlight) Touch
• Projected Capacitive Touch Physical
• Dimension (WxHxD): 408 x 312.4 x 59.2 mm
• Weight: 4.36 kg
• Front Panel Construction: Flat Rugged Aluminum Die casting Bezel Environment
• Operating Temperature: 20°C to 70°C
• Storage Temperature: 20°C to 70°C
• Relative Humidity: 80% RH @ 40°C (non condensing)
• IP Level: IP 65 Compliant Front Panel Certification
• CE
• FCC Class A

External Layout

Dimension

C S W115FHC R10
Display

•  LCD Size: 15.6″ (16:9)
• Max. Resolution: 1920 x 1080 (Full HD)
• Contrast Ratio: 700 : 1
• LCD Color: 16.7M
• Pixel Pitch (mm): 0.17925 (H) x 0.17925 (V)
• Viewing Angle (H V): 160 / 140
•  Backlight MTBF: 50000 hrs (LED Backlight) Touch
• Projected Capacitive Touch Physical
• Dimension (WxHxD): 420 x 254 x 66.2 mm
• Weight: 4 kg
• Front Panel Construction: Rugged Aluminum Die casting Bezel Environment
• Operating Temperature: 10°C to 70°C
• Storage Temperature: 20°C to 70°C
• Relative Humidity: 95% RH @ 39°C (non condensing)
• IP Level: IP 65 Compliant Front Panel Certification
• CE
• FCC, ICES 003 Class A

External Layout

Dimension

C S 117 C R10
Display

• LCD Size: 17″ (5:4)
• Max. Resolution: 1280 x 1024 (Full HD)
• Brightness (cd/m2): 1500
• Contrast Ratio: 800 : 1
• LCD Color: 16.7M
• Pixel Pitch (mm): 0.264 (H) x 0.264 (V)
• Viewing Angle (H V): 160 / 140
• Backlight MTBF: 50000 hrs (LED Backlight) Touch
• Projected Capacitive Touch Physical
• Dimension (WxHxD): 450 x 350 x 63.2 mm
• Weight: 5.64kg
• Front Panel Construction: Flat Rugged Aluminum Die casting Bezel Environment
• Operating Temperature: 20°C to 70°C
• Storage Temperature: 20°C to 70°C
• Relative Humidity: 80% RH @ 40°C (non condensing)
• IP Level: IP 65 Compliant Front Panel Certification
• CE
• FCC Class A

External Layout

Dimension

Connecting with PC Module or Monitor Module
The photos show the male connector (on display module) and female connector (on PC module or monitor module)

1. Connect the modules.

2. Fasten the 6 screws to fix the PC module or monitor module on the display module.

Panel Mount

1. Accessories provided by Cincoze are as follows.
   

2. All mounting kits displayed are to be inserted into holes.

3. Installation preparation and steps.
   
   

4. Apply all mount kits to the rest of holes. And you have completed the panel mount installation, as shown below.

© 2021 Cincoze Co., Ltd. All rights reserved.
The Cincoze logo is a registered trademark of Cincoze Co., Ltd.
All other logos appearing in this catalog are the intellectual property of the respective company, product, or organization associated with the logo.
All product specifications and information are subject to change without notice.

References

• Cincoze – Expertise in Embedded Computing
• Cincoze – Expertise in Embedded Computing

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>