DEWERT OKIN FP2601 Sleep Control Box User Guide

DEWERT OKIN FP2601 Sleep Control Box

Product Information

Test Equipment and Devices

Sleep Monitor

Test Process

• Test environment construction

  • Register the login module. When users enter the application for the first time, the login page will automatically pop up. Registered users can enter their mobile phone number and password to log in. Account data can be exchanged with SmartBed, a self-developed project of the company.
  • Click “+” to add the device.

• Functional Test
  The motor control interface is as follows:

  • Head motor lift: Long press “+” to extend the head motor. Press and hold “-” to retract the head motor. Release to stop.
  • Foot motor lift: Long press “+” to extend the foot motor. Long press “-” to retract the foot motor. Release to stop.
  • Memory bit + flat: Click the icons of READING, TV, ZG, ANTISNORE, M1, M2 to execute the corresponding memory bit position. Hold down the icon for 5 seconds to set the memory bit location. Click the FLAT icon to flatten the bed.
  • Underbed light: Click the icon to turn the underbed light on and off.
  • Massage interface: Click MASSAGEHEAD, MASSAGEFOOT, TIMER, MODE to select the current function. Click the SWITCH icon to adjust the current option status. When the massage is off, clicking SWITCH does not work when the TIMER and MODE options are available. Click MASSAGE ON/OFF to turn on and off the head and foot motor.

Test equipment and devices

Configuration List

1. CB series control bo x CB. 15.22.18A 1
2. Light bel t R5.113.00.0 67 1
3. S witching power suppl y JLDP.10.023.000 1
4. Power cor d R5.217.01.01 2 1
5. Head driv e JLDQ.14.B.346.132 1
6. Foot driv e JLDQ.14.B.190.60A 1
7. Sleep monitoring plug i n 1

Test process

Test environment construction

1. Register the login module. When users enter the application for the first time, the login page will automatically pop up. As shown in the picture below:

   • Registered users can enter their mobile phone number and password to log in.
   • Account data can be exchanged with SmartBed, a self-developed project of the company.

2. Click “+” to add the device, as shown in the picture below:

Functional Test

The motor control interface is as follows:

1. Head motor lift
   Long press “+”, the head motor is extended; Press and hold “-” to withdraw the head motor. Release and stop.

2. Foot motor lift
   Long press “+”, the foot motor is extended; Long press “-“, and the foot motor is withdrawn. Release and stop.

3. Memory bit +flat

   • Click the ICONS of “READING”, “TV”, “ZG”, “ANTISNORE”, “M1”, “M2”, and the motor will be executed to the corresponding memory bit position; Hold down  the icon for 5s to set the memory bit location
   • Click the “FLAT” icon to flatten the bed

4. Underbed light
   Click the icon to turn the underbed light on and off

5. The massage interface is as follows:

6. Click MASSAGEHEAD, MASSAGEFOOT, TIMER, MODE, and select the current function.

7. Click the “SWITCH” icon to adjust the current option status. When the massage is off, clicking “SWITCH” does not work when the “TIMER” and “MODE” options are available

8. Click MASSAGE ON/OFF to turn on and off the head and foot motor

9. The alarm screen is as follows:

10. .At the top is the time selector, which displays the time of the current alarm. By default, the current time is selected. You can modify the alarm by swiping.

11. Week Date selector, which is used to quickly select a day in weeks when you want to repeat the alarm. By default, it is not repeated, that is, it is not lit at all.

12. The alarm mode includes ZG, FLAT, M1, M2 VIBRATION. Click the icon to select the alarm mode

13. “TURN ON” at the bottom is the alarm switch indicator, which can be used to quickly turn on or off the alarm.

14. The setting interface is as follows:

15. Privacy Mode Indicates the privacy mode. If the privacy mode is enabled, the device does not collect sensor data

16. CHILD MODE: Click the button on the right to turn it on or off. After opening, the bed control page cannot be operated, as shown in the following figure

17. ANTI_SNORING INTERVENTION: only click the button on the right to open or close, as shown in the picture below:

  * Anti-snoring intervention can be divided into demonstration mode and setting mode
  * Demonstration mode: Bed flat -> head motor extended running 3s-> Wait for 10s-> Head motor extended running 3s-> Wait for 10-> Head motor extended running 3s-> Wait for 10s-> Head motor withdrawn running 35-> Wait for 10s-> Head motor withdrawn running 35-> Wait for 10s-> Head motor withdrawn running 35 -> Wait for 10s-> Head motor withdrawn running 3S -> Wait for 10s-> Bed flattened
  * Setting mode: Divided into low(2s, 10min), MEDIUM(3s, 20min), HIGH(4s, 20min)(head motor lift time, successive descent waiting time)3 gears. According to the sensor minute data packet, the user is monitored in the sleep state, 3 snoring within 5 minutes, will trigger the anti-snoring action, if the snoring state is no longer monitored, the bed remains in the current state; If snoring is still detected, perform the following actions:
  * Bed flat -> head motor extended run xx-> Wait for xx-> Head motor extended run xx-> Wait for xx-> Head motor extended run xx-> Wait for xx-> Head motor withdrawn run xx-> Wait for xx-> Head motor withdrawn run xx-> Wait for xx-> Head motor withdrawn run XX -> Wait for XX -> Bed flat
  * Perform this action for 3 times, if the snoring state can be detected after 3 times, no longer perform. The bed will automatically level when it is detected to leave the bed.  

Note: XX executes the corresponding time according to the gear position

Sleep monitoring

• Real-time monitoring interface:

  • Real-time monitoring of breathing, heart rate, body movement status

  • Click “View Report” to view the report, as shown in the picture below:

  • From top to bottom are sleep stage pie chart, heart rate curve chart, breathing curve chart, snoring curve chart, body motion curve chart, and score progress bar chart.

  • Different from the daily report, the snoring line chart and the body motion line chart of the Week and Month report are the counting line charts. Day is a graph with or without line lines.

  • The data itself contains “report” and “record” two states.

  • The “DAY” report displays all recorded data from 10 p.m. the night before to 10 p.m. the day after. The middle section will be filled with zero blank data

  • The day score is obtained from the average score of all reports for the day. The scoring logic is as follows:

  * Week automatically selects the data in the week of the current date. The data is displayed in chronological order. The data that contains the data and is closest to today is displayed first.
  * Month automatically selects the recorded data in the month of the current date. The recorded data is displayed in chronological order. The data that contains the data and is closest to today is displayed first.

• Sleep aid function, as shown below:
  • Click the corresponding icon (” White Noise “, “Light Music”, “Alpha Wave”) to enter the music player, only the corresponding music package is different

FCC Statement

• This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential ins tallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfere nce will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recepti on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Statement

• This device complies with Industry Canada license-exempt RSS standard(s).
• Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must ac cept any interference, including interference that may cause undesired operation of the device.
• The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
• This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>