Avantree Breeze BTHS-TW118 True Wireless Earbuds User Guide

: June 12, 2024
: Avantree

Table of Contents

Breeze
- Quick Start Guide
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Breeze

Quick Start Guide

Model No.: BTHS-TW118
FCC ID:WJ5-BTHS-TW118

Product Overview

To INCREASE volume: Double-click the main button on the R earbud.
To DECREASE volume: Double-click the main button on the L earbud.

x2 tap
x1 tap
1s press & hold
x1 tap
1s press & hold

LED charge indicator

Charging

To charge the earbuds:

To charge the case:

The LED on the case will turn solid red when out of battery. Connect the case to a 5V/500mA-2A rated USB charger or PC USB port to charge.

1 Use with Phone

Place the earbuds into the charging case. When rst removed from the charging case, the earbuds will enter pairing mode automatically (LED will ash BLUE and RED). Select “Avantree Breeze” in your phone’s Bluetooth menu.

Still can’t connect?
Visit avantree.com/support/breeze/phone- connection

2 Subsequent Use

For subsequent use, your earbuds should automatically reconnect to the last- paired device within a few seconds when taken out of the case. If not, you can manually initiate reconnection by tapping the MFB button once or select “Avantree Breeze” in your device’s Bluetooth menu.

Still can’t reconnect?
Visit avantree.com/breeze/reconnection

NOTE: The Breeze does not have a manual pairing mode. If you want to pair a dierent device, you need to disconnect from the currently paired device in order to enter the Breeze into pairing mode.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Online Support

Troubleshooting & FAQ

How to adjust volume on the Breeze?
How to factory reset / clear pairing history of Breeze?

Need further assistance?
Visit avantree.com/support/breeze

Contact Us

Support Tickets avantree.com/submit-a-ticket

Support Email support@avantree.com

USA / CA +1 800 232 2078 (9am-6pm PST, Mon-Fri )
UK +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
DE +49 32221097297 (11am-9pm, CET, Mon-Sat )
FR +33 176340312 (11am-9pm, CET, Mon-Sat )
IT +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
ES +34 931786261 (9am-6pm, CET, Mon-Sat )
AU +61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)