wiltec 52367 On-tap Water Filter User Manual
- June 5, 2024
- wiltec
Table of Contents
wiltec 52367 On-tap Water Filter User
Please read and follow the operating instructions and safety information prior
to initial operation.
Technical changes reserved!
lustrations, functional steps, and technical data may deviate insignificantly
due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating man- ual,
nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik
GmbH has made every possible effort to ensure that this operating manual is
complete, accurate, and up-to-date, errors cannot be ruled out entirely. If
you have found an error or wish to suggest an improvement, we look forward to
hearing from you. Send us an e-mail to: service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
In order to shorten the waiting time and to allow for an easy on-site
processing, we kindly ask you to contact us briefly beforehand or to place
your order via the webshop.
E-mail: service@wiltec.info
Tel: +49 2403 555920
Fax: +49 2403 55592-15
To return your goods for exchange, repair, or other purposes, please use the
following address. Atten- tion! To allow for a trouble-free complaint or
return, it is important to contact our customer service team before returning
your goods.
52249 Eschweiler Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592-0
Fax: +49 2403 55592-15
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Safety instructions
Read these safety instructions before using the device and only use the device
according to its purpose. The mark “Attention!” would like to direct your
attention to an important safety aspect to be observed absolutely. Non-
observance can cause severe consequences. Keep these instructions in a safe
place to be always able to refer to them. Attention! Only use drinking-quality
water as water source. This device can remove chlorine rests and
turbid particles from the tap water; however, it cannot transform non-drinking
water into drinking water.
Correct use of filtered water
- Before the first use of a day, let the water run through during 10 s before using it.
- After a period of more than two days of non-use of the device, let the water run through during
- 1 min before using it.
- Keep the outlet of the filtered water clean.
- Use the water as quickly as possible.
- The moment of exchange of a filter cartridge depends on several factors (quantity, quality, pres- sure of the water, etc.).
- After a period of more than two weeks of non-use of the device, exchange the filter cartridge.
Preventing leaks and accidents
- Do not use soap, detergent, thinner, alcohol, etc. to clean the device; these substances might damage the filter.
- Do not use the filter if it is damaged. Using a damaged filter can provoke splashes of water from the filter.
- Do not remove the filter from the water tap during filtration. This could damage the filter and provoke leaks.
- Make sure that neither the filter nor the tap touches another object during use; otherwise, the filter could jump off the water tap.
- Do not let water hotter than 35 °C run through the Water side of the device; this can reduce the capacity of the active carbon and provoke errors.
- Do not let water hotter than 50C run through the Raw water side of the device; this can provokedeformations of parts of the filter.
- Neither obstruct the water outlet nor connect other devices/accessories. If you do so, errors and damages might follow.
- Make sure that the device does not freeze. This could damage the filter and water tap.
- Whenever the water pressure is too high, adjust a lesser flow rate.
- Avoid hots surfaces; heat might deform or damage the device.
Improper water taps
Parts
Name
- Connection with M24 external thread
- Connection with M22 external thread
- Connection with M24 internal thread
- Connection with M22 internal thread
- Universal connection
Name
- Clockwork
- Filter case
- Ceramic and carbon filter
- Water filter bottom
- Inlet of pure water
- Gasket
- Nut
- Silicon pad
- Filter net of incoming water
- Body
- Selector switch
- Raw water inlet
Installation and instructions
First determine the proper method and accessories for your connection. 1st method: water tap with universal joint and faucet Requirements to the water tap: diameter 15-24 mm, length: over 20 mm
-
Step
Take off the threaded ring from thee body. -
Step
Pass the connection with internal thread
through the mounting nut. -
Step
Mount the nuts in the device. -
- Step
Mount the universal joint in the threaded joint.
- Step
-
Step
Insert the round faucet into the universal con- nection and tighten the retaining ring on the universal joint with a screwdriver. -
Step
If the faucet diameter is comprised between 19 and 24 mm, remove the seal on the univer- sal joint and install it by referring to the instal- lation method.
2nd method: Installation of M22/M24 internal thre ad joints and faucets (external thread)
- Connection with M24 internal thread
- Connection with M22 internal thread
-
Step
Take off the threaded ring from the body. -
Step
Take off the metal bubbler. -
Step
Pass the mounting nut through the tap tube. -
Step
Choose the proper inner threaded connection for the installation. -
Step
Tighten the inner thread and water tap with awrench. If the front end of the water tap or the threaded joint shifts, use sealing tape to fix them. -
Step
Tighten the mounting nut and mounting device. Ensure proper sealing.
3rd method: Installation of M22/M24 external thread joints and faucets (internal thread)
- Connection with M24 external thread
- Connection with M22 external thread
-
Step
Take off the threaded ring from the body. -
Step
Take off the metal bubbler. -
Step
Choose the correct external threaded connection for installation and tighten the external threaded connection of the water tap with a wrench. If the front end of the water tap or the threaded joint shifts, use sealing tape to fix them. -
Step
Tighten the mounting nut and mounting device. Check if the sealing is correct.
Mounting or replacing a filter
Attention! Before replacing a filter, you will need to close the water tap and set the selector switch to the Raw water side. Then you can replace the filter.
-
Step
Remove the water filter case. -
Step
Install or replace a filter.Attention! Remove the plastic bag of the cartridge before installing. -
Step
Insert the filter cartridge/pull out the base and tighten the filter insert to protect the case. Attention! Remove the plastic bag of the cartridge before installing. -
Step 4
Align the connection of the filter base in thedirection of the arrow. -
Step
Insert the connection intro the filter base of the main unit and tighten it until it is vertical.
Selection of raw water and pure water
Daily maintenance of the filter
Cleaning the fiter cartridges
- The filter cartridges are made from ceramic and carbon fibre composite.
- Cleaning: with sandpaper or a brush to clean the surface of the filter.
- When cleaning a filter cartridge, leave the outlet opening open to prevent dit particles from entering the filter.
Replacing the filter cartridges
- Normally, the service life of the filter cartridges depends on the water quality. It is advisable to replace a filter cartridge after 5-6 months. Replace the filter cartridges early enough.
Troubleshooting
Technical specifications
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
by WilTec Wildanger Technik GmbH|
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
References
- Aoyue.de
- Teichtip.de
- WilTec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit
- Unternehmen: WilTec Wildanger Technik GmbH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>