VOLTCRAFT UC-2ACX002 USB Charger 63 W Instruction Manual
- June 4, 2024
- VOLTCRAFT
Table of Contents
VOLTCRAFT UC-2ACX002 USB Charger 63 W
Intended use
The product is a USB charger that supports power delivery (quick charge) technology. The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances. If you use the product for purposes other than those described, the product may be damaged.Improper use can result in short circuits, fires, electric shocks or other hazards. The product complies with the statutory national and European requirements.For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available tothird parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery contents
- Product
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate
important information in this document. Always read this information
carefully. Protection class 2 (double or reinforced insulation, protective
insulation). This product must only be used in dry, enclosed indoor areas. It
must not become damp or wet.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
Handling
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
- Consult an expert when in doubt about the operation, safety or connection of the appliance.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
- Do not switch the product on after it has been taken from a cold to a warm environment. The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
Connected devices
- Also observe the safety and operating instructions of any other devices which are connected to the product.
Power adapter
Do not tamper with power supply components. Risk of death by electric shock!
-
Always ensure proper connection.
-
Never use damaged power supply components.
-
Do not modify power supply components.
-
Connect the appliance to a wall socket that can be accessed easily.
-
As power supply, only use the supplied mains adaptor.
-
Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies withthe voltage of your electricity supplier.
-
Never connect or disconnect power adaptors if your hands are wet.
-
Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on the plug.
-
For safety reasons, disconnect the power adaptor from the mains socket during storms.
-
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric
shock! Take the following steps:- Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
- Unplug the power adapter from the mains socket.
- Use a new power adapter of the same design. Do not use the damaged adapter again.
Cleaning
Important:
- Do not use aggressive cleaning agents, rubbing alcohol, or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Disconnect the product from the power supply.
- Let the product cool down to ambient temperature.
- Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines. You thus fulfill your
statutory obligations and contribute to the protection of the environment.
Technical data
General
- Protection class ………………………………. II
- USB port protection …………………………. Short circuit, over current
- Operating conditions………………………… 0 to +40 °C, 10 – 90 % RH (non-condensing)
- Storage conditions…………………………… -25 to +70 °C, 10 – 90 % RH (non-condensing)
- Product dimensions (WxHxD) (approx.) 31 x 98 x 72 mm
- Weight (approx.) …………………………….. 172 g
Power supply
- Input voltage ………………………………….. 100 – 240 V/AC
- Input AC frequency …………………………. 50 / 60 Hz
- USB-CTM output ………………………………. Max. 45.0 W; 5.0 V/DC 3.0 A, 9.0 V/DC 30 A, 12.0 V/DC 3.0 A, 15.0 V/DC 3.0 A, 20.0 V/DC 2.25 A
- USB-A output………………………………….. Max. 18.0 W ; 3.6 – 6.5 V/DC 3.0 A, 6.0 – 9.0 V/DC 2.0 A, 9.0 – 12.0 V/DC 1.5 A
- Total output…………………………………….. (USB- A: max. 18 W) + (USB-CTM max. 45 W) = max. 63 W.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com). All rights including
translation reserved. Reproduction by any method (e.g. photocopying,
microfilming or capture in electronic data processing systems) requires prior
written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2348948_V1_0921_dh_mh_en I1/O1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>