Weller WLIBAK8 Wireless Soldering Iron Instruction Manual

: June 12, 2024
: Weller

Table of Contents

Weller WLIBAK8 Wireless Soldering Iron
Product Information
Product Usage Instructions
ORIGINAL INSTRUCTIONS
Safety information
Maintenance and repair
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Weller WLIBAK8 Wireless Soldering Iron

Weller-WLIBAK8-Wireless-Soldering-Iron-product

Product Information

The product is manufactured by Apex Tool Group, a reputable company in the tool industry. It is designed to meet the necessary safety and quality standards, as indicated by the CE markings. The product is available in different regions, including the United Kingdom and China.

Contact Information:

Apex Tool Group (USA):
- Address: 1000 Lufkin Road, Apex, NC 27539
- Tel: +1 (833) 3170763
- Fax: +1 800-546-7312
- Email: CustomerCare@ApexToolGroup.com
Apex Tool Group (UK Operations):
- Address: Piccadilly, Tamworth Staffordshire B78 2ER
Apex Tool Group (China):
- Address: Room 302A, NO 177 Bibo Road, Shanghai, 201202
- Tel: +86 (21) 60880288
- Fax: +86 (21) 60880289

Product Usage Instructions

To use the product effectively and safely, please follow these instructions:

Ensure that the product is suitable for the specific task you are performing.
Read the user manual thoroughly before using the product.
Inspect the product for any damage or defects before each use. Do not use if any issues are found.
Use the product in accordance with the provided instructions and guidelines.
Wear appropriate safety equipment, such as goggles or gloves, as recommended for the specific task.
Ensure a stable and secure work surface before using the product.
Do not force the product beyond its intended use or capacity.
Keep the product away from children and pets.
Store the product in a safe and dry place, away from moisture and extreme temperatures.
If you encounter any issues or have questions about the product, contact Apex Tool Group using the provided contact information.

ORIGINAL INSTRUCTIONS

$Weller-WLIBAK8-Wireless-Soldering-Iron-fig- $1$$ $Weller-WLIBAK8-Wireless-Soldering-Iron-fig- $2$$ $Weller-WLIBAK8-Wireless-Soldering-Iron-fig- $4$$

Safety information

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and under- stand the hazards involved. Childre shall not play with the appliance. Cleaning and user maintenance shall not be made by children wi- without supervision.
Always place the soldering tool in the safety rest while not in use.
Use the soldering iron exclusively for the purpose indicate in the Operating Instructions of soldering and desoldering under the conditions specified here. The manufacturer shall not be liable for damage resulting from misuse of the machine or unauthorised alterations.
This device is intended for domestic use only.

Warning! Fire and explosion hazard Risk of burns!

Do not touch the hot soldering tips and keep them away from inflammable objects.
After the soldering process, the soldering tool and the workpiece holders are still hot. Risk of bumping through liquid solder.
Keep explosive and flammable objects well away from the device.
Only replace solder tips when cold

Wear appropriate protective clothing to protect yourself against burns. Protect your eyes by wearing eye protec- tors.

Do not use the soldering tool in a damp or wet environment. Never work on voltage-carrying parts. The soldering tool must be operated only in perfect techni cal working order.

Avoid unintentional operation. Disconnect the soldering to from the power supply while not in use.

Check that the mains voltage is compatible with the connected load of the soldering iron.

If the electrical tool’s power supply cord is damaged, this must be replaced with a specially prefabricated power supply cord available through the customer service organization.

Use the battery for the intended purpose only. Do not use damaged chargers or batteries. Do not short-circuit the battery. Short-circuiting the poles may damage the battery or the connected item.

Warning! Fire and explosion hazard!

Do not throw batteries into fire as there is a risk of explosi on. Batteries may also explode if they are damaged.
Do not attempt to open or destroy batteries. If fluid leaks from a battery, make sure that this fluid does not come into contact with your skin or eyes. If it does, clean your skin or eyes with water immediately or seek medical attention.
Never charge the battery in an environment with acids and easily flammable materials.
Battery to be used at the ambient temperatures between 10°C and +40°C only.
Never put the battery on heaters and do not expose it to strong sunlight for a long time.
After being subject to heavy load, let the battery cool down first.
If service is required, only send the entire device instead of removing the battery and sending it separately. The tool should be switched off and the soldering tip removed, as special hazardous goods regulations must be complied with otherwise.

Maintenance and repair

Follow the instructions on soldering tip replacement. Use
original replacement parts only. Always have your soldering
tool repaired by a qualified electrician. For more informati-
on please visit www.weller-tools.com

Warranty

Weller supplies this device with a warranty valid for two (2) years from the date of purchase. The warranty relates to material and manufacturing defects and covers both replacement parts and labor. The warranty shall be void if damage is due to improper use and if the device has been tampered with by unauthorized persons.

This device conforms to the specifications of the EC Decla- ration of Conformity with Directives 2014/30/EU, 2014/35/ EU and 2011/65/EU (RoHS).

Disposal

Do not dispose of electric tools together with household waste material! In observance of European Directive 2012/19/EU on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

GERMANY

Weller Tools GmbH Carl-Benz-Straße 2 74354 Besigheim