Westinghouse WPac8000 Portable Air Conditioner User Guide
- June 12, 2024
- Westinghouse
Table of Contents
WPac8000 Portable Air Conditioner
User Guide
WARNING
This Quick Start Guide is not a substitute for reading the operator’s manual.
To reduce the risk of injury or death, user must read and understand
operator’s manual before using this product.
ASSEMBLY
-
Depress the latch and remove the hose inlet
-
Assemble the inlet and outlet to the exhaust hose.
-
Secure the exhaust hose to the air conditioner
-
Cut and attach foam seal (adhesive) to window frame
-
Assemble window vent kit
-
Install the window vent kit into the window frame.
-
Insert the exhaust hose into the window vent kit.
-
Select a suitable location for the air conditioner.
For customer support, scan the QR code.
https://westinghouseoutdoorpower.com/pages/support
OPERATION
USING THE CONTROL PANEL
A Press the ON/OFF button ( ) to turn the appliance on and off. When
activated, the unit will return to the last mode that was used.
B Press the MODE button ( ) to cycle between Cool, Dry, Heat, Fan modes and
Smart
C Press the UP () or DOWN ( ) button to select a temperature in cool mode or
heat mode.
D Press the FAN button ( ) to cycle between fan speeds in cool, fan, heat, and
smart mode.
E Use the TIMER button ( ) to program the air conditioner to start or stop at
a certain time. 
USING THE REMOTE CONTROL
- Use the remote control to operate the air conditioner from a distance. The remote must be within 23 ft. (7 meters) away from the appliance.
A. Press the ON/OFF button ( ) to turn the appliance on and off. When
activated, the unit will return to the last mode that was used.
B. Use the FUNCTION button ( ) to select the Turbo Function or the Follow Me
Function.
C. Press the UP ( ) or DOWN (7) button to select a temperature in cool mode or
heat mode.
D. Use the TIMER button ( ) to program the air conditioner to start or stop at
a certain time.
E. Press the SWING button ( ) to make the louvers move up and down
automatically.
F. Press the SLEEP button ( ) to enter Sleep Mode.
G .Press the FAN button ( ) to cycle between fan speeds in cool, fan, heat,
and smart mode.
H. Use the UNIT CHANGE button (°C/°F) to toggle between Fahrenheit and
Celsius.
I. Press the MODE button ( ) to cycle between Cool, Dry, Heat, Fan modes and
Smart
Questions? Call 855.944.3571 or
visit wpowereo.com/pages/support