Lorelli TORINO 1 Layer Print Instruction Manual

Lorelli TORINO 1 Layer Print

Product Information

The product is manufactured by Didis Ltd., a company based in Bulgaria. The company’s address is 6 Trakia-iztok Street, Shumen.

Contact Information:

• Phone: +359 54 850 830
• Emails: home.market@didis-ltd.com; export@didis-ltd.com

Product Usage Instructions

Before using the product, please read and understand the following instructions:

1. Ensure that the product is properly assembled and all parts are securely attached.
2. Check for any visible damage or defects. If found, do not use the product and contact customer support.
3. Connect the product to a power source as indicated in the user manual.
4. Follow the recommended operating guidelines for optimal performance and safety.
5. Refer to the user manual for specific instructions on how to use different features and functions of the product.
6. Keep the product away from water and other liquids to prevent damage.
7. Do not disassemble or modify the product without proper authorization, as it may void the warranty.
8. Ensure that the product is used in a well-ventilated area to prevent overheating.
9. When not in use, store the product in a safe and dry place.

If you have any questions or need further assistance, please contact our customer support team using the provided contact information.

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto vour device

IMPORTANT! RETAIN FOR FUTURE REFERENCE: READ CAREFULLY!

SAFETY REQUIREMENTS

1. WARNING! Do not leave the child unattended.
2. WARNING ! Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot and of the changing unit.
3. WARNING ! Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
4. WARNING ! Do not leave anything in the cot or place the cot close to another product which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords etc.!
5. WARNING ! Do not use more than one mattress in the cot!
6. WARNING ! Only use the mattress sold with this cot, do not add a second mattress on this one, suffocation hazards!
7. WARNING! The cot is ready for use, only when the locking mechanisms are engaged and check carefully that they are fully engaged before using the folding cot.
8. WARNING ! The lowest position is the safest and the base should always be used in that position as soon as the baby is old enough to sit up.
9. WARNING ! All assembly fittings should always be tightened properly, should be checked regularly and retightened as necessary.
10. WARNING ! To prevent injury from falls when the child is able to climb out of the cot, the cot shall no longer be used for that child.
11. WARNING ! Any additional or replacement parts shall only be obtained from the manufacturer or distributer.
12. WARNING ! Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
13. WARNING ! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.

EN 716-1:2017+AC:2019, EN 716-2:2017

MAINTENANCE AND CARE

ATTENTION! If you use the cot outdoors, please clean all parts throughly after each use.
Cleaning. To clean use soapy water or soft cleaning detergent. Handwash the bag with soapy water. Do not iron. Do not bleach.
ATTENTION! Do not put bulk objects in the cot that can help the baby to jump out from the cot. Do not place the cot near heating devices because it will damage the plastic and fabrics.
ATTENTION! Use the cot regarding to these instructions!

PARTS

1. Cot – 1 pc.
2. Mattress – 1 pc.
3. Bag – 1 pc.
4. Auxiliary supports – 2 pc.

ASSEMBLING OF THE COT

1. Take out the cot from the bag. Picture 2
2. Put away the mattress which is placed around the cot by unsticking the three soft bands. Picture 3
3. Unfold the cot at half. Catch the middle part of the short upper tubes and lift it up till the mechanism situated in the middle of the tube is locked. Picture 4 In the same time the vertical tubes (baby cot legs) should be close to each other at its lower end and the middle part of the cot should stay at upper position. This provides the easy locking of mechanisms! Repeat the same procedure with the rest of the upper tubes. Picture 5 Check if the lockers of each one are well locked by slightly pressing downwards the middle part of the tube.
4. Press downwards the middle part of the cot till the lower tubes are straightened and locked. Picture 6 Then the all sides are straightened and stabled. Unfold the mattress and put it on the bottom of your cot. Picture 7 Insert the velcro strips in the two openings at both sides of the bottom. Picture 8. Stick the velcro strips tightly. Dicture & 1 Vour cot is ready for use

DISMANTLING OF THE COT

1. Take out the mattress and pull the center band up to higher. (Picture 9)
2. Release the button up on rails center, make it droop as “V”. (Picture 10) Please, pull the center band up more, if not be completely droopy, then press again. Secure the bulge fully up and push four legs together.
3. Wrap it into the mattress and clip tightly. (Picture 3)
4. Put the whole wrap in the carry bag for travel. (Picture 2)
   ATTENTION! For easier unlock of the mechanism by pressing the buttons you need to lift the tube up. (Picture 10) The hard pushing of the tube downward with locked mechanism leads to serious damage!

Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +359 54 850 830
e-mails: home.market@didis-Itd.com;
export@didis-ltd.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>