Lorelli BOSTON Baby Stroller Instruction Manual
- June 3, 2024
- lorelli
Table of Contents
BOSTON
Baby Stroller 
Instruction
Manual
BOSTON Baby Stroller
https://lorelli.eu/media/documents/products/Strollers/BOSTON%203in1_Manual%20Instruction.pdf
Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.
IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
SAFETY REQUIREMENT
- This vehicle is suitable for children with a weight up to 22 kg or 4 years whichever comes first! Summer basket: Age 6+ m.
- The height of the carried child in the stroller should not exceed 104 cm!
- Use parking device if you do not hold the stroller with hand
- Do not leave the stroller on hills or inclined surfaces even if you have activated the parking system!
- Parking device shall be engaged when placing and removing the children!
- The shopping basket can take a maximum load of 2 kg!
- Any load attached to the handle and/or on the back of the backrest and/or on the sides of the vehicle will affect the stability of the vehicle! Maximum load of the accessory bag 1 kg. Do not hang any additional bags!
- Regularly check for loose parts! Make routine inspection, regularly maintain, clean and/or wash the vehicle!
- The vehicle shall be used only for 1 child!
- Accessories which are not approved by the manufacturer shall not be used!
- Only spare parts delivered or recommended by the manufacturer/ distributor can be used! 1
- Make sure that the safety belts are placed properly!
- The stroller should always be used under the supervision of an adult!
- Do not allow children to suspend him/herself or play in the stroller!
- Do not allow children to stand in the stroller!
- Do not allow your child to stand on the seat and foot rest!
- Do not use the stroller on uneven surfaces near fire or other dangerous places!
- Do not use the stroller on stairs and escalators!
- Fold the stroller before go upstairs and downstairs. Mounting the stroller on stairs, pavements and others with the child in it and by pushing the handle causes deformation of the stroller and is out of warranty repair!
- Adjusting of the back rest must be made only by a person read carefully the instruction rules for adjusting!
- Any additional baggage left in the stroller may cause it to become unstable!
- The person who assembles the stroller must be familiarized with its functions!
- The front bar can not be used as a carry handle!
- The car seat COMET/ VEGA I-SIZE (additional accessory, not included in the set) is compatible with stroller “BOSTON” by means of additional adaptors (additional accessory, not included in the set)!
WARNING
WARNING! Never leave the child unattended!
WARNING! Ensure that all the locking devices are engaged before use!
WARNING! To avoid injury ensure that the child is kept away when
unfolding and folding this product!
WARNING! Do not let the child play with this product!
WARNING! This seat unit ( summer basket) is not suitable for children
under 6 months!
WARNING! Always use the restraint system!
WARNING! Check that the pram body or seat unit or car seat attachment
devices are correctly engaged before use!
WARNING! This product is not suitable for running or skating!
WARNINGINo additional mattress / cushion shall be added.
WARNING! Always use the crotch belt in combination with the waist belt!
To prevent injury from a fall ora slip off always use the shoulder straps!
WARNING! Keep away from fire !
WARNING! This pram body is designed to be used from baby’s birth.
WARNING! The pram body shall not be used, as soon as the child is able to
sit by himself, roll over and can push itself up on its hands and knees.
Maximum weight of the child: 9 kg
WARNING ! Images on the title page and in the instruction manual are only
illustrative and may differ from the real product.
EN 1888 -2:2018
MAINTENANCE AND CARE
- Toclean the metal parts, clean with a wet cloth and wipe dry.
- To clean the plastic parts, use a towel, water and a soft detergent.
- To clean the textile parts, use a solution for cleaning of upholsteries.
- When not in use, never place other objects in or on the stroller!
- Always dry and air the stroller if it gets wet.
- Run regular clean-ups over the wheel axes and the plastic elements.
- Always clean the wheel axes and the plastic elements after using the stroller on sandy or dusty surfaces!
- DO NOT LUBRICATE the wheel axes or other movable parts of the stroller! Just clean them!
- Run regular checks for loose or damaged parts and if there are such parts, immediately replace them with new ones!
PARTS
Picture 1
1. Metal frame of the stroller
2. Rear wheels
3. Shopping basket
4. Front wheels
5. Accessory bag
6. Summer basket ( Seat unit)
7. Griff
8. Foot cover
9. Canopy
10. Pram body
11. Mattress / pad| – 1 pes.
-2 pcs.
– 1 pes.
– 2 pcs.
-1 pcs.
– 1 pcs.
– 1 pcs.
-2 pcs.
– 1 pcs.
– 1 pes.
– 1 pcs.
---|---
UNFOLDING
- Folded stroller (Photo 2) Release the blocking mechanism ! ( Picture 2.1)
- Lift the handle of the stroller up and then push backward. As a result, it will extend and lock automatically.
(Photos 3 and 4)
ASSEMBLING
- Mount the front wheels by pressing them upward until they lock into place. (Photo 5) Check if they are securely locked. To unmount them, press the console button and pull the wheel down. (Photo 6)
- Mount the rear wheels as shown in Photo 7. To unmount them, pull the rear axle button and pull the wheel all the way. (Photo 8)
- Mount the stroller basket paying attention to the pincers being placed and fixed in the designated openings in the frame. (Photo 9) A click will indicate that the basket has been secured. To unmount, press simultaneously the buttons on both sides of the basket and pull upward. (Photo 10)
- Mount the front bar for the child. (Photo 12) To remove the front bar, press the buttons placed on both its sides and pull all the way. (Photo 13)
- Installation of the canopy : Fix the attachment brackets of the canopy to the metal construction _ ( Picture 14 A) Removing of the canopy: Pull the brackets of the canopy off the metal construction to release. ( Picture 14 B)
EXPLOITATION
-
To place the stroller in a stationary position, use the rear wheel brakes, by pressing the brake pedal located on the rear axle. (Photo 7A) To release the brake, lift the brake pedal with your leg . (Photo 7B)
WARNING: The parking device does not guarantee an optimal hold in steep slopes. Therefore never leave the strollerona sloping ground with a child sitting or lying in the stroller!
WARNING! The brake of Your stroller is a type of parking device. To apply the brake please note, that the stroller shall not be moved. Gently press the brake pedal, at the same time gently push the stroller back and forth to synchronize the operation of the braking device and to achieve an effective engagement of the braking mechanism. -
You can regulate the handle by pressing simultaneously the two buttons on both sides the mechanism and turn upward or downward. (Photo 16) .
-
While moving the stroller along rough and uneven surfaces you can use the option of movement in a straight line by pressing the button of blocking cog on the front wheels. Picture 6A orelease the front wheels, lift the locking cog . (Picture 6B ) .
-
For a change (lowering) the sunshade position, take its upper part and pull down to the desired position. (Photo 14C
ATTENTION! Disregarding this instruction leads to a damage in the fixators and is not subject to a warranty recovery! -
While using the seat BY ALL MEANS fasten the safety belts onthe child!
-
Put the shoulder and waist belts together and place them in the central buckling clasp. (Photo 11A) Regulate the length of the safety belts by pulling the clasps all the way. (Photo 11B) To unlock the belts, press the button on the central clasp. (Photo 11C) 7 . ;
-
Adjusting the footrest – To change the position of the step, simultaneously press the both buttons . Picture 15 ATTENTION! Disregarding this instruction leads to a damage in the fixators and is not subject to a warranty recovery! .
-
Adjusting the backrest- Picture 17
FOLDING
- Activate the stroller brakes.
- Fold the sunshade to the maximum.
- Turn the handle into an upper position (Photo 16) _ .
- Folding the stroller for transportation is done by pulling the mechanisms located on both sides of the handle and move forward the handle. Picture 19 After folding, place the fixating mechanism against self-unfolding. Photo 2,1)
- The correctly folded stroller should look like the image in photo 20.
PRAM BODY
ATTENTION : For the correct preparation (unfolding) of the pram body, after take it out of the transport box , please do the following:
- Place the pram body on a convenient table and and unzip the upholstery with the mattress.( Picture P2)
- With one hand, lift the metal frame of the pram body from the one side. ( Picture P1)
- With other hand, push the bottom and hold the metal tensioner.
- While pressing the bottom, catch the strap of the tensioner and pull to outside of the pram body till the restrictive bolts man
- Repeat the procedure with the other tensioner, until full unfolding of the pram body,which should look like Picture P1.
- Place back the upholstery with the mattress .( Picture P2)
- The pram body should be parent-facing
www.lorelli.eu Find us on
Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +359 54 850 830
e-mails: home.market@didis-ltd.com;
export@didis-ltd.com| Ananc
Bonrapua, Wymen, “Tpakna-n3T0K” 6
Ten. +359 54 850 830
e-mails: home.market@didis-ltd.com;
export@didis-ltd.com| Unic importator in
Romania
DIDIS INTERNATIONAL
Strada Sfantul Pantelimon Nr.1
Oras Pantelimon, Judetul Ilfov
Phone: +40 21 211 65 60
Fax: +40 21 210 65 62
E-mail: of fice@didis.ro
---|---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>