Lorelli A6 Rio Car Seat Instruction Manual

Lorelli A6 Rio Car Seat

Manual Instruction

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.

FEATURES

Picture

IMPORTANT! KEEP FOR

FUTURE REFERENCE. PLEASE READ!

1. Note regarding belted enhanced child restraint system for specific vehicles (76-105 cm). This is a belted enhanced child restraint system for specific vehicles.
   It is approved according to UN Regulation No. 129 for use in specific vehicles specified in the list of respective vehicles (see the list at the end of the instructions for use).
   In case of doubt, consult the manufacturer of the enhanced child restraint system or the dealer.
   This is an enhanced child restraint system i-Size booster seat (100-150 cm). It is approved under UN Regulation No. 129 for use mainly in i-Size seating positions as specified by the vehicle manufacturers in the vehicle user manual. In case of doubt, consult the manufacturer of the enhanced child restraint system or the dealer.

2. In terms of installation, the system can be expected to comply if the manufacturer has stated in the vehicle’s owner’s manual that it is suitable for installation of an i-Size child restraint system of this age group.

3. This child restraint system is classified as “i-Size” under conditions more stringent than those applied to previous models not accompanied by this note.

4. This car seat is approved for use with the following types of installation methods: FORWARD-FACING INSTALLATION: ECE R129/03 Belted ECRS for specific vehicles, front-facing, 76-105 cm and child weight :S18 kg with ISOFIX attachments + top tether
   FORWARD-FACING INSTALLATION: ECE R129/03 ECRS I-size booster seat, front­facing, 100-105 cm with ISOFIX attachments+ adult safety belt, or only adults safety belt.

1. ISOFIX attachments+ three-point belts or
2. Three-point belts.

( Safety instructions! )

The Instructions for use must be kept for the entire life of the universal child restraint system!

1. ATTENTION! The hard items and plastic parts of the enhanced child restraint system must be placed and installed so that, when the vehicle is in normal operation, it cannot be trapped by a sliding seat or vehicle door.

2. ATTENTION! All belts that secure the restraint system to the vehicle must be taut, and all belts that restrain the child must be adjusted to the child’s body. The belts should not become twisted.

3. ATTENTION! It is extremely important to ensure that the lap belt is used low down so that the pelvis is secure.

4. ATTENTION! It is recommended that the device be replaced when it has been subjected to violent mechanical stress in an accident.

5. ATTENTION! It is dangerous to make alterations or additions to the device without the approval of the type approval authority. Failure to follow exactly the installation instructions provided by the manufacturer of the child restraint system can be hazardous.

6. ATTENTION! When the chair is not equipped with a fabric cover, it should be kept away from sunlight, as it may otherwise be too hot for the child’s skin.
   

7. ATTENTION! Do not leave children unattended in an enhanced child restraint system.

8. ATTENTION I Properly secure any luggage or other items that may cause injury in the event of a collision!

9. ATTENTION! Do not use the enhanced child restraint system without its cover.

10. ATTENTION! Do not replace the cover of the enhanced child restraint system with anything other than that recommended by the manufacturer, as the cover is integral to the performance of the child restraint system.

11. IMPORTANT NOT USE IT BEFORE THE CHILD IS OVER 15 MONTHS OF AGE.

12. ATTENTION! Regularly check the belts for wear, paying special attention to the attachment points, the guards and the adjusting devices!
    

13. ATTENTION! Do not leave the buckle partially closed, it should be locked when all parts are engaged. You must be able to remove the child from the seat immediately in the event of an emergency. Your child should be taught never to play with the buckle.

14. ATTENTION! Store the child seat in a safe place out of the reach of children when not in use. Avoid placing heavy objects on the seat. Do not allow your car seat to come into contact with corrosive substances like battery acid.

15. ATTENTION! For the “i-Size enhanced child restraint system” the user must read the vehicle manufacturer’s instruction manual!

16. ATTENTION Do not keep your child on this safety seat for a long period of time. During long journeys, take more breaks and remove the child from the safety seat.

17.  ATTENTION! Not to be used before the child’s age has reached 15 months and before they have reached a height of 76 cm.

18. ATTENTION! The images on the front page and inside the manual are for illustrative purposes and may differ from the actual product.

19. ATTENTION! Before the first use of the product, remove all marketing materials, as well as the devices used to attach them to the product.

20. ATTENTION! DO NOT use the enhanced child restraint system if the buckle position of the adult seat belt with respect to the seat’s main anchor points is unsatisfactory, please contact the manufacturer if in doubt.

21. ATTENTION! Do not use anchor points other than those described in the instructions and marked on the enhanced child restraint system, please contact the manufacturer if doubt.

WASHING INSTRUCTIONS

1. The car seat can be cleaned with lukewarm water and soap. Do not use aggressive cleaning agents such as abrasives or solvents.
2. The cover must be hand-washed at a maximum temperature of 30°C. Do not put it in the dryer. Allow the cover to air-dry.
3. Plastic parts can be cleaned with a damp cloth. Do not use abrasives.
4.  Never use lubricant or solvent on any part of the seat.

TYPE OF APPROVED BELTS YOU MUST HAVE IN YOUR CAR

1. When using the car seat for a height range of 76-105 cm, it can be installed ONLY in the direction of travel of the vehicle using:
   • ISOFIX attachments + top tether
   • Options for installation – the mounting location must be equipped with ISOFIX attachment points and a top tether attachment point!
   • Car safety belt – Diagonal belt
   • Car safety belt – Lap belt
   • ISOFIX attachments
   • Top tether attachment point in the car trunk
2. When using the car seat for a height range of 100-150 cm, it can be installed

ONLY in the direction of travel of the vehicle using:

• ISOFIX attachments + three-point belts or
• Three point belts

can be installed ONLY on seats with 3-POINT BELTS+ ISOFIX attachments!

IT CANNOT BE USED ON SEATS WITH 2-POINT BELTS!

Characteristics

Picture A

1. Headrest -1 pc.
2. Backrest -1 pc.
3. Shoulder straps – 2 pcs.
4. Shoulder strap pads -2 pcs.
5. Soft insert – 1 pc.
6. Buckle – 1 pc.
7. Lap belt guide -2 pcs.
8. Headrest adjustment mechanism -1 pc.
9. Top tether -1 pc.
10. Length adjustment button for the top tether -1 pc.
11. Fastening hook -1 pc.
12. Vehicle belt guide -1 pc.
13. Buckle pad – 1 pcs.
14. Adjustment button (Cap of adjustment button) -1 pc.
15. Harness adjustment strap – 1 pc.
16. Metal hook for connecting the shoulder straps -1 pc.
17. ISOFIX release buttons – 2 pcs ..
18. ISOFIX attachment mechanisms (connectors)- 2 pcs.
19. ISOFIX guides – 2 pcs.

Installation from 76-105 cm with ISOFIX connectors + top tether front- facing

IMPORTANT: First!, check that ! he vehicle has ISOFIX metal anchoring hooks al ! the intersection between the seal and the backrest of the vehicle under the upholstery.
NOTE: When using the ISOFIX system, the ISOFIX guides (19) can be inserted into the vehicle’s ISOFIX hooks (Picture 1 ). The ISOFIX hooks at either end of ! the seals pass through the guides.

1. Step 1. Press the buttons (17) to release the ISOFIX system (Picture 2). Slide the rails lo
   he longest position.

2. Step 2. Place the car seal on! the seals of the vehicle in a front-facing position. Press the ISOFIX anchors directly onto the vehicle’s melal hooks until you hear a “Click”. Make sure you hear a “click” and the ISOFIX lock indicator is GREEN (Picture 3).

3. Step 3. Press the child seal against the backrest of Iha vehicle seat. During this move, Iha ISOFIX system will tighten the Iha child seal on the Iha vehicle backrest and you will hear a “Click”. If the seat wobbles end the ISOFIXanchors are out, repeat the above steps and reinstall.

4. Step 4. Press the top tether button to adjust its length (Picture 4). Pass the top tether behind Iha back of Iha car seal (Picture 5). Attach Iha hook of! the child seal lo the car’s ISOFIX hook. Pull the tether to tighten it (Picture 6).

5. Step 5. Press the harness adjustment button and at the same time pull the lwo shoulder straps (Picture 7) Note: Do not pull on the shoulder pads. Press the red button on! the buckle to release the shoulder strap locking elements (Picture 8) Place the child in the seal, then secure the locking elements in the buckle again.

Headrest and 11houlder11trap height adjustment.
The headrest can be adjusted in different positions. Adjust the headrest by operating the mechanism handle (Picture 9). Move !he headrest lo the desired position up or down according to the height of your child. Please ensure Iha! Iha headrest is positioned correctly around the child’s head (Picture 10). Insert both straps in !he central buckle until you hear a “click”.
Tightening ! he straps: gradually pull! he straps on ! he seal (Picture 11)

(STORING THE HARNESS)

1. Press !he red Bull on on !he buckles lo release the locking elements of the shoulder straps (Pictures)
2. Unfasten ! he backrest cover, !hen place the shoulder straps on the inside (Picture 12, 13).
3. Pass the Iha buckle under the seal cover (Picture 14) by inserting it into ! the hole in ! he base (Picture 15). Fas! en the cover again.

Installatron from 100-105 cm ISOFIX connectors+ adult safety belt, forward- facing

After the ISOFIX anchors of the child seal have been pulled out, place it on Iha vehicle seal in a front-facing position “in the direction of travel”.

1. Press the ISOFIX anchors directly onto the vehicle’s metal hooks until you hear a
   “Click”. Make sure you hear a “click” and ! the ISOFIX lock indicator is GREEN (Picture 3). Remove the soft insert from the car seat

2. Place the child in the sea

3. Fasten ! he seats with !he car seal bell by passing ! he shoulder belt through the headrest guide (Picture 16). The lap belt goes between the armrest and over the child’s lap through the green-marked spots on the sea!. Fasten !he bell into !he vehicle buckle until you hear a “click” (Picture 17). If necessary, tighten the seat belt by pulling on it

installation from 100-150 cm with adult safety bell Forward-facing installation

1. Pull the ISOFIX anchors as far inwards as possible towards !he sea!, so ! ha! ! he rails retract into the base (Picture 18, 19).
2. Place the child seat firmly against the car seat in the direction of travel.
3. Pass the car’s shoulder belt through !he headrest guide (Picture 16) and !he lap bell through the green-marked spots on !he sea!. Fasten the belt into the vehicle buckle until you hear a “click”. If necessary, tighten the seat belt by pulling on ii (Picture 17)

Removing the cover.

1. Removal: Pull the headrest as high as possible. Release ! the shoulder straps from! the buckles. Remove !he soft insert. Remove the cover of ! the seals and headrest (Picture 20, 21)
2. Installing the cover: repeat the steps in reverse order.
   For children up to 105 cm tall, lhe car seal must! be used with lhe soft insert. When! the height! of the child is over 105 cm, you should remove it! he soft insert. Release ! he straps from the buckle and remove the soft insert.

Didis Ltd.
Bulgaria, Shum en, 6 Trakia-iztok Street Phone: +359 54 850 830

• e-mails: home.market@didis-ltd.com;
• export@didis-ltd.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>