Lorelli MOONLIGHT 1 Layer Baby Cot Instruction Manual

MOONLIGHT 1 Layer Baby Cot

Sweet Dreams. Sweet Play – Moonbaby Light

The Moonbaby Light is a product designed in the EU, version 1.5, to help soothe babies and provide a playful atmosphere in their room. It has one layer and is suitable for babies aged 0+ months.

Product Usage Instructions

1. Place the Moonbaby Light in a safe and stable location in the baby’s room.
2. Turn on the device by pressing the power button.
3. Select the desired light mode by pressing the mode button. There are several options available, including a soft white light, rotating colors, and a combination of both.
4. Adjust the brightness level by pressing the brightness button. There are several brightness levels to choose from.
5. To activate the timer, press the timer button. The device will automatically turn off after 30 minutes.
6. When not in use, turn off the device and unplug it from the power source.
7. Regularly check the device for any damage or defects. Do not use if any issues are found.
8. Keep the device out of reach of children and pets.
9. If you have any questions or concerns about the product, contact the manufacturer at the provided phone number or email address.

For more information about the Moonbaby Light, visit the manufacturer’s website at www.lorelli.eu.

Scan the QR code to get more product information and manual instruction in more languages. Download QR
Scanner App onto your device.

IMPORTANT! RETAIN FOR FUTURE REFERENCE: READ CAREFULLY!

SAFETY REQUIREMENTS

1. WARNING! Do not leave the child unattended.
2. WARNING! Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot and of the changing unit.
3. WARNING! Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
4. WARNING! Do not leave anything in the cot or place the cot close to another product which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords etc.!
5. WARNING! Only use the mattress sold with this card do not add a second mattress on this one, l§J suffocation hazards !
6. WARNING! The cot is ready for use, only when the locking mechanisms are engaged and check carefully that they are fully engaged before using the folding cot.
7. WARNING! All assembly fittings should always be tightened properly, should be checked regularly and retightened as necessary.
8. WARNING! To prevent injury from falls when the child is able to climb out of the cot, the cot shall no longer be used for that child.
9. WARNING! Any additional or replacement parts shall only be obtained from the manufacturer or distributer.
10. WARNING! Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
11. WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.
    EN 716-1:2017+AC:2019, EN 716-2:2017

MAINTENANCE AND CARE

• ATTENTION! If you use the cot outdoors, please clean all parts throughly after each use.

• Cleaning. To clean use soapy water or soft cleaning detergent. Handwash the bag with soapy water.
  Do not iron. Do not bleach.

• ATTENTION! Do not put bulk objects in the cot that can help the baby to jump out from the cot. Do not place the cot near heating devices because it will damage the plastic and fabrics.

• ATTENTION! Use the cot regarding to these instructions!

PARTS

Picture 1

1. Cot – 1 pc.
2. Mattress – 1 pc.
3. Bag- 1 pc.
4. Auxiliary supports – 2 pc.

ASSEMBLING OF THE COT

1. Take out the cot from the bag. Picture 2

2. Put away the mattress which is placed around the cot by unsticking the three soft bands. Picture 3

3. Unfold the cot at half. Catch the middle part of the short upper tubes and lift it up till the mechanism situated in the middle of the tube is locked. Picture 4 In the same time the vertical tubes (baby cot legs) should be close to each other at its lower end and the middle part of the cot should stay at upper position. This provides the easy locking of mechanisms! Repeat the same procedure with the rest of
   the upper tubes. Picture 5 Check if the lockers of each one are well locked by slightly pressing downwards the middle part of the tube.

4. Press downwards the middle part of the cot till the lower tubes are straightened and locked. (Picture 6) Then the all sides are straightened and stabled. Unfold the mattress and put it on the bottom of your cot. Picture 7 Insert the velcro strips in the two openings at both sides of the bottom. Picture 8. Stick the velcro strips tightly. Picture 8.1. Your cot is ready for use.

DISMANTLING OF THE COT

1. Take out the mattress and pull the center band up to higher. (Picture 9)
2. Release the button up on rails center, make it droop as ‘V”. (Picture 10) Please, pull the center band up more, if not be completely droopy, then press again. Secure the bulge fully up and push four legs together.
3. Wrap it into the mattress and clip tightly. (Picture 3)
4. Put the whole wrap in the carry bag for travel. (Picture 2)
   ATTENTION I
   For easier unlock of the mechanism by pressing the buttons you need to lift the tube up.
   (Picture 10)
   The hard pushing of the tube downward with locked mechanism leads to serious damage!

Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +359 54 850 830
E-mails: home.market@didis-ltd.com; export@didis-ltd.com

References

• 营销SaaS建网站|商城|小程序;手机管网站,APP做营销,SCRM管客户,生意乐通达!
• Lorelli - Baby and children products with proven quality

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>