Lorelli 1025006 Digital Soother Thermometer Instruction Manual
- June 3, 2024
- lorelli
Table of Contents
1025006 Digital Soother Thermometer
Instruction Manual Designed in EU
Dear Customer, Thank you for purchasing Digital Soother Thermometer. Before using this product, please read this instruction carefully.
Description
| Symbol | Description |
|---|---|
| Type BF applied part. | |
| **** | Information about a manufacturer |
| Please read the instructionscarefully. | |
| IP22 | Rate degree of protection against access to water and |
inhomogeneous substances
| Waste electrical materials should be sent to a dedi cated collection point
for recycling.
| EU safety requirements
| European authorized representative
Feature
- LCD screen display.
- Memory function.
- Automatically taking the temperature and shut down automatically.
- No mercurial pollution or safe concern.
Specification
- Measurement Scope: 32.0 °C – 42.9°C (89.6°F – 109.2°F)
- Measurement Time: Three minutes +/- One minute
- Temperature Accuracy: +/- 0.1 °C (32.2°F)
- Battery: 1.50 VDG AG3
- Display Mode: LCD (liquid crystal display)
- Memory: Display the previous temperature.
- Timer: When the measure completely, it will ring 10 times.
- Dimension: 55 x 50 x 50 mm
- Weight: About 16g
How to use it?
- Press on/off button, wait for LCD display 188.8, to make sure the thermometer working well and battery stay good condition, then it will display the previous saving memory as well as activate the working figure 37.0 °C (LO°F) Flash°C (°F), if the environmental temperature is higher than 32.0 °C (89.6°F) it will directly display the figure and begin measuring the temperature.
- If the temperature is higher than 42.9 °C(109.2°F) the LCD screen will display H °C(H°F). If the temperature is below than 32.0°C(89.6°F) screen will display LO °C(LO°F).
- When the temperature is complete LCD screen will display °C(F) and stop flashing with 10 times ring music.
- When you have got the temperature result, please make sure shut down the thermometer in order to save battery’s life. If not, operation system will automatically turn off the thermometer in 10 minutes.
- If the measurement is shut down, please repeat the above procedure to begin the temperature measurement again.
Precautions
- Before measuring the temperature, please check the soother first. If it has broken problem, please do not use it.
- Do not put the thermometer in high heat or expose to direct sunshine and prevent touching any chemical solvent to avoid any unexpected situation happen.
- Please, do not try to disassemble, repair or re-build the thermometer.
- Digital Soother Thermometer is an electronic measurement. Please, keep away from your child.
- Digital Soother Thermometer is for mouth measuring only.
- The battery is sealed installed. Please, do not take part it from the thermometer by yourself.
Clean the thermometer
- Put the soother into the alcohol solvent in one second. LCD display “Screen can only be cleaned by fabric or by clean water”.
- This thermometer has waterproof function. You can put the thermometer in clean water for simply washing.
Caution: This thermometer can not be put into boiled water.
Limited warranty
The warranty does not cover the damage of improper use or the battery running out. If the unit does not function properly due to defective parts or assembly we will repair it free of charge or replace with a new one.
FUDAKANG INDUSTRIAL CO. ,LTD
Address: 301, 3rd Floor, Block 1, No. 60 Shangshuxia Road, Changping
Town, Dongguan City, Guangdong Prov ince, China.
TEL: 86-769-8109818
FAX: 86-769-81098187
Declaration of RoHS Compliance
Brand Name: lorelli Manufacturer Name : Fudakang Industrial Co., LTD. Manufacturer Model Number :BT-A51 Description : Electronic clinical thermometer
- We hereby declare that the above model is compliant to the Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (RoHS) 2011/65/ER&(EU)2015/863..
- We hereby agree that only RoHS compliant materials and components will be used in the assembly of the above model. Under no circumstances will non-compliant materials and components be used in place of approved compliant equivalents during the life of the product
- Should it be necessary, we agree to supply documentation demonstrating compliance to the above directive on individual components or materials used in the assembly of the above model as and when requested by the company of DIMS LTD, BULGARIA. This will be in the form of a test report from an independent accredited test laboratory.
- In the event that product is found to be non compliant after arrival in the EU, we hereby agree to take immediate corrective action. We unconditionally agree to take full financial responsibility for all costs incurred as a result of non compliant product being found, including (but not limited to), costs relating to a rework, returning the product for 100% credit, two way freight and inland transportation and administration costs and loss of profit.
Find us on www.torelli.eu
Manufacturer
Fudakang Industrial Co., Ltd.
Add: 301, 3rd Floor, Block 1,
No.60 Shangshuxia Road,
Changping Town, Dongguan,
Guangdong, China
Importer
Didis Ltd. Bulgaria, Shumen,
6 Trakia-iztok Street
Phone: +359 54 850 830
E-mails: home.market@didis-ltd.com
export@didis-ltd.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>