sanag Z31S Pro Max TWS True Wireless Stereo Earbuds User Guide
- June 12, 2024
- sanag
Table of Contents
sanag Z31S Pro Max TWS True Wireless Stereo Earbuds
Product Information
The FCC Statement is a regulatory statement issued by the Federal Communications Commission (FCC) in the United States. It is a requirement for all electronic devices that emit radio frequency energy to obtain FCC certification. The purpose of the FCC Statement is to ensure that the device complies with the FCC’s regulations and does not cause harmful interference to other devices or communication systems.
Product Usage Instructions
- Compliance: Before using the product, ensure that it is FCC certified by checking for the FCC logo or statement on the device or packaging. Using uncertified devices may violate FCC regulations and can result in interference with other electronic devices.
- Interference: To prevent interference with other devices, keep a distance of at least 20 cm (8 inches) between the product and other electronic devices, such as televisions, radios, or mobile phones.
- Power Source: Connect the product to a power source using the provided power cord or adapter. Ensure that the power source meets the voltage requirements specified in the product manual.
- Antenna: If the product has an external antenna, position it vertically for optimal signal reception. Avoid touching or tampering with the antenna during operation.
- Placement: Place the product on a stable surface away from excessive heat, moisture, or direct sunlight. Ensure proper ventilation around the product to prevent overheating.
- Operation: Follow the specific instructions provided in the user manual for turning on, adjusting settings, and using various features of the product.
- Cleaning and Maintenance: To clean the product, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the surface of the product. Regularly check and clean any vents or openings to prevent dust accumulation.
- Troubleshooting: If you encounter any issues with the product’s performance or functionality, refer to the troubleshooting section of the user manual for possible solutions. If the problem persists, contact the manufacturer’s customer support for assistance.
Note: It is important to read and understand the complete user manual before using the product to ensure safe and proper usage.
Product Overview
- Headphone MFB key
- Horn
- Charging electric shock
- LED light
- Wheat Head/MIC
Operating Instructions for Headset Functions
- Start up: start up manually, and press MFB for about 3 seconds; Start the machine automaticity, pick up the headset from the charging chamber, the White blue lamplight of the main ear flashes, and the light of the auxiliary ear does not light up.
- Shutdown: manual shutdown, long press the MFB button of the left or right headset for about 5 seconds, and the white light will flash for 3 times and then go out Lamp; Automatic shutdown, automatic shutdown after putting the headset into the charging chamber {when the charging chamber is powered on), white light On; After power on or disconnection of Bluetooth connection, if there is no operation, it will automatically shut down and turn off the light in about 5 minutes.
- Pairing status: the left and right earphones are powered on, and after successful pairing, the main and auxiliary ears are randomly assigned
- Headset pairing with mobile phone: take out the headset from the charging compartment, and the headset will automatically power on, enter pairing and reconnection status, open the mobile phone Bluetooth, find the device name in the Bluetooth list, and connect the device.
- Return connection status: open the charging compartment, take out the headset and automatically return it
- Play /pause; When the headset playing music, click the left or right ear to play /pause music
- Volume+: When playing music through headphones, triple tap the MFB button on the left ear to increase the volume.
- Volume-: When playing music through headphones, three clicks on the MFB button on the right ear can reduce the volume
- Previous song: when the headset is playing music, click the left ear MFB key three times to switch to the previous song
- Next song: when the headset is playing music, click the right ear MFB key three times to switch to the next song
- Incoming call answering: click the MFB button on the left or right ear to answer an incoming call
- Hang up the phone: after the call is completed, double click the MFB button on the left or right ear to end the call
- Refuse to answer: When a call is received, long press the MFB key on the left or right ear for 25 to reject the call
- Start SIRI\voice assistant: when connected to standby or music playing/pausing status, long press MFB key of left ear or right ear for 2 seconds to start voice assistant
- Single ear use: Click: Play /Pause/ Answer /End Double click: Next track. Three strikes: Increase the volume. Long press; Voice Assistant/Reject
- Charging: put the headset into the charging box to charge the headset. The white light of the headset is always on during charging, and the white light of the fully charged headset is off
Bluetooth pairing
- Open the charging compartment, take out the headset and start it automatically; Please keep the distance between the Bluetooth headset and the mobile phone (or other connecting devices) within S0CM, the closer the better.
- Open the Bluetooth interface of the mobile phone, search for sanag Z31S Pro Max”, click pairing, and connect the device.
Specifications
- Name:TWS Bluetooth Headset
- Model: sanag Z31S Pro Max
- Bluetooth distance: >10m
- Bluetooth version:V 5.3
- Battery capacity of headset: 8QmAh*2
- Battery capacity of charging chamber: 400mAh
Matters needing attention
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to be heated or close to a fire source, such as a cooking stove,
- Do not expose the product to direct sunlight for a long time.
- Do not discard this product in fire to avoid explosion.
- Do not attempt to disassemble this product to make any modifications, as it does not contain any maintenance components.
- Do not use this product in rain.
- If you do not plan to use this product for a long time, please store it in a dry environment and Charge the headset less once to prolong its life and avoid extreme temperature and dust.
FCC Statement
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>