QCY T5 TWS Bluetooth Earbuds User Manual

: June 12, 2024
: QCY

QCY T5 TWS Bluetooth Earbuds

USER MANUAL

QCY T5 Manual English Instructions QCY T5 Pairing QCY T5 Reset Touch Control Gaming Mode Setting Charging Case T5 TWS User Manual Guide

With globe huge sales of QCY T5 Earbuds globe,more and more QCY customer get their satisfied earbuds of QCY T5,however,they are lots of our customer contact us for QCY T5 manual as there are some reason they can’t find the user manual instructions come with package,the most frequence question are QCY T5 Manual English,QCY T5 Instructions,QCY T5 Pairing and QCY T5 Reset how to operate,how to touch control and how to switch QCY T5 gaming mode.So,QCY decide to post this article for helping our customer checking anytime and anywhere! Please read as following:

If you do not learn more about QCY T5 Please learn more details of QCY T5 first:

Package Include Overview

Choose Your Eartips L / M / S

LED / Mic
Touch bar
Tuning Hole
Pogo Pins

Please try medium eartips first as they fit most people.

QCY T5 manual:

How to Pair

How do you use a T5 QCY?

QCY T5 Pairing

How do I pair my T5 QCY?
How to pair QCY T5 Earbuds
How do you pair QCY earbuds?

First Time Pairing:

Pick up both QCY T5 earbuds out of charging case.
QCY T5 Earbuds will auto power and automatically pairing with each other,one of them will blink red and green
Open your cellphone Bluetooth function and search for ” QCY-T5 ” Then tap to connect.
If success ,the LED will turn off,QCY T5 pairing steps complete! If earbuds fail to auto power on, please charge them and try again.
Switch Paired Device:
Turn off phone A’s Bluetooth faculty and earbuds will auto disconnect and enter into pairing mode.
On phone B, search for QCY-T5 and tap to connect.
*Multi-point connection is not available Earbuds will
auto reconnect to phone B upon powering up again.

Second use

Take both of earbuds out of the charging case
QCY T5 Earbuds will auto power and automatically pairing with each other,one of them will blink green
Two earbuds will auto reconnect to cellphone
QCY T5 Repairing complete

Factory Setting

QCY Earbuds not Pairing Together
QCY T5 left earbud not working
QCY T5 one side not working

QCY T5 Reset

How to Reset QCY T5

How do I factory reset my QCY T5?

QCY T5 Factory Reset

Factory Setting
(Try the following steps to fix connectivity issue)
Set to factory:

On cellphone, search for QCY-T5, tap and choose ignore or cancel pairing.
Pick up two earbuds, keep touching both bars for 8s or until LEDs glow red for 2s to power off.
Then Keep touching both bars for 10s or until LEDs blink red and green 3 times then blink red to set earbuds to factory.
*Please refer “First Time Pairing” to connect after factory
setting.
Reset steps complete

QCY T5 right earbuds not working

Please checking right earbuds has enough power
Please do the reset steps again

QCY T5 left earbud not working

Please checking left earbuds has enough power
Please do the reset steps again

How to Charging Earbuds

Push earbud into the case to charge LED will glow solid red when charging and turn to green for 1 minute once top up.

How to Charging the Case

How do you charge a QCY T5 case?

Charge the case via USB cable. LED will glow solid green when charging and turn off once top up.

Mono Mode

Power off earbud then keep touching the bar for 5s to enter pairing mode LED blinks red and green
On cellphone, search for QCY_T5
Tap to connect

How to Wear

How to Wear QCY T5

Rotate earbud and pop it into your ear then shake head to check wearing stability.
Please adjust mic towards your mouth to gain better calling experience.
Three-way- Calling& Switch
Earphones are connected with phone A. Double press MFB to answer incoming call from phone B. If another call is coming from phone C in sync, double press MFB to put the first call on held while activating the second call Hold MFB to switch between active call and held call. Ignore the second call in three-way calling: earphones are connected with phone A. Double press MFB to answer incoming call from phone B. If another call is coming from phone C in sync, hold MFB to ignore the second call while keeping the first call.

Product Parameters

QCY-T5 Product Parameters

Model:In1925
Pairing name: QCY-T5
Bluetooth version: V5.0 Stand time: approx. 70hr
Charging time: approx. 2hr Music time: approx. 4 or 5hr
Talking time: approx. 4hr
Operation range: 10m(with no obstacle)
Battery type: li-ion
Battery capacity(earbud): 3.7V 40mAh
Battery capacity(charging case): 3.7V 380mAh
Input parameter(charging case): 5V=500mA
Bluetooth profiles: HSP/HFP/A2DP/AVRCP

Functions Introductions

How do I control my T5 QCY?

QCY T5 touch bar
QCY T5 touch control not working

Function Introduction

How to Entering TWS Mode

If Current status is :Power-off with no connectivity record,
Keep touching the bar for 1s to power on and earbud will auto enter pairing mode LED blink red and green / Prompt: TONE
If Current status is :Power off then keep touching the bar for 5s to enter pairing mode , Double touch the bar to enter TWS mode
LED blink red and green then right LED turns off / Prompt: NO

How to Power on QCY T5

If Power-off: Keep touching the bar for 1s The LED glows green for 1s / Prompt: TONE
If Charging: Pick up earbuds from the case,The LED glows green for 1s / Prompt: TONE

How to Power-off QCY T5

If Power-on:

Keep touching the bar for 8s to power off earbud(two earbuds will power off, if earbuds are not connected to device),The LED glows red for 2s / Prompt: TONE
Pop earbud into the case to power off,The LED glows red / Prompt: TONE

How to Remove connectivity record

If Power-off : Keep touching the bar for 10s to remove connectivity record
Pop earbud into the case to power off,The LED blinks red and green 3 times then earbuds turns off (if power-off both earbuds,then keep touching both bars for 10s to remove connectivity record.During the course,only one led blinks at first ,then both LEDs start to blink red and green for 3 times) / Prompt: No

How to Answer / end call

If Incoming call/calling , Double touch the bar,LED:No / Prompt: TONE

How to Ignore call

if Incoming call，Keep touching the bar for 2s,LED:No / Prompt: TONE

Voice assistant

If Connected,Triple touch left bar,LED:No / Prompt: TONE

How to Enter QCY T5 Gaming Mode

If QCY T5 Playing/gaming,Triple touch right bar to switch on/off QCY T5 gaming mode
LED:No / Prompt On: two beeps Off: three beeps

Music pause/play Music:

If Music playing
Double touch the bar to pause, double touch again to resume playing,LED:No / Prompt: No

Skip track

If Music playing Keep touching right/left bar to skip track forward/backward,LED:No / Prompt: No

QCY T5 Volume Control

QCY T5 Volume Too Low

QCY T5 Earbuds can not control the volume on earbuds,the qcy t5 volume control adjusted by your device,phone or pad or computer.

QCY T5 Warranty Card

Warranty Period
12 months after you purchase this item. (or you may inquire your local shopper for more details.)
Free Service:
Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:
Free exchange service will not be accessed under
following circumstances:

Damages caused unauthorized disassembly.
Defects or physical damages caused by leaking or dropping off.
Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

Tips

Before using the headset, please read the manual carefully and keep it for future references.
The headset need to be fully charged prior to first-time use.
If the headset is left unused for over two weeks, please recharge it periodically.
Please use the chargers made by qualified manufacturer.
If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.

QCY T5 FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TVtechnician for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
()This device may not cause harmful interference, and(2)
this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.

Hazardous substances and their contents in the item
Hazardous Substances
This form is made by SJ/T 11364 regulation.
0: means that hazardous substance content in the homogeneous materials of this part is within the limits(EU)2015/863 regulation.
X: means that hazardous substance content in, at least, one certain homogeneous material of this part is beyond the limits of (EU) 2015/863 regulation,but there is no mature alternative in the industry at present,
it still conforms to the EU ROHS Directive in the scope of exemption.
Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Perform standard:q/hl1-2019;/hl2-2017
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Daojiao Town, Dongguan City, Guangdong, China

Caveats

Never disassemble or modify your headset for any reasons to avoid any damages and danger.
Do not store the headset in extreme temperatures (under
0C or over 45C).
Avoid using the indicator close to the eves of children or animals.
Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
Do not use harsh chemicals or strong detergents to clean the headset.
Keep the headset dry.
CMIIT ID: 2019DP6793

How do I know when my T5 is fully charged?

How do I check my T5 battery?

For QCY T5 Earbuds: when the earbuds fully charged ,the green led will lighting for 60s and then it will turn off
For QCY T5 Charging Case:when the Charging Case fully charged ,the green led will lighting for 60s and then it will turn off

QCY T5 charging time

2 hours

QCY T5 Driver Windows 10

QCY T5 Driver MACOS

QCY T5 Driver Laptop

If you want to connect your QCY T5 to computer or laptop,no matter windows 10 or MACOS ,what you need to do is install the right and latest Bluetooth driver is ok,using Bluetooth to connect with QCY T5！