QCY T7 Earbuds User Manual

QCY T7 Earbuds

USER MANUAL

As QCY T7 Known all over the earth, large number of customer got their new advance QCY T7 Earbuds. All of QCY earbuds package with the user manual instructions, however, lots of customer connect QCY customer service for some reason their manual losing or can’t find at the moment. The most asked problem are QCY T7 Manual, QCY T7 Manual English, QCY T7 Earbuds Manual, QCY T7 Instructions, QCY T7 Reset, QCY T7 Pairing, QCY T7 User Manual, QCY T7 Wireless Earbuds Manual etc.

QCY start a article online, no need download QCY T7 Manual English PDF, just checking, anywhere, anytime!

For better using experiene scan QR code to download QCY App before start-up.

What’s in the Box

• T7 Earbuds & Carry Case
• Type-C Cable
• User Manual
• QCY T7 Case Charging Box

Overview

Pairing

How do I pair my QCY T7?

First time connectivity:

1. Open the QCY T7 earbuds case and take out two QCY T7 earbuds, they will auto power-on and automatically pairing with each other.
2. Left earbud will auto turn connectable, When right LED turns off. Ready for pairing with device.
3. On Mobile phone or other device ,search for QCY-T7 and tap to connect both earbuds to phone.
4. If all connecting success, QCY T7 pairing complete!

Switch connected device:

1. Turn off Phone A’s Bluetooth faculty and earbuds will auto disconnect and turn connectable.
2. On Phone B , Search for QCY-T7 and tap to connect.

*Multi-point connection is not available and earbuds will auto reconnect to phone B upon powering up again.

Factory Reset

Factory Setting: (Please refer the following methods to fix connectivity errors)

QCY T7 Reset Method 1:

1. Delete connectivity QCY T7 Bluetooth record on phone, If any.
2. Power off first before reset the earbuds: Take out both earbuds from case and keep touching both of the panel for 5s or until LEDs blink red for 1s to power off them.
3. Once again keep touching both of the panels for 10s (LED will blink red and green 3 times then blink red once during the course) to reset them to factory.

*Refer How to connect to build connection after factory setting.

QCY T7 Reset Method 2 :

1. open the lid and hold charging case button until LED of the case shows red green and blue.
2. Close the lid to reset earbuds to factory.

How to wear

1. Rotate earbud and pop it into your ear then shake head to check wearing stability.
2. Please adjust Mic towards your mouth to gain better calling experience.
3. Please wear earbuds properly, making sure they fit in firmly and sound holes are inside ear channels
4. You may turn on / off in-ear detection in APP

Mono Mode

• Power off earbuds. Keep touching the panel on either earbud for 5s to turn earbuds into connectable (LED blinks red and green).
• On phone Search for QCY-T7 and tap to connect the earbuds to phone.

Charging Earbuds

How do I charge my QCY T7?

• Push earbuds into the case and close the lid. Earbuds will auto turn off and to be charged

Charging Case

• Charge the case via USB cable. LED will blink red when battery is less than 60%, Blink green when between 60% and 95% and blink blue when over 95%. LED will glow solid blue once top up.

Function

QCY T7 Touch Control

• Power on
  • earbuds not in case : keep touching the panel for 2s
  • Earbuds in case with lid closed: Open the lid
• Power off
  • Push earbuds into case and close the lid
  • Keep touching the panel for 5s
• Answer / end call: Double tap the panel to answer / end the call
• Ignore call: Keep touching the panel for 1s
• Voice Assistant : Triple tap the panel
• Music play / pause:
  • Double tap
  • put off either of earbuds to pause and put it in 15s to resume play
• Skip track forward: Keep touch the panel for 2s to skip track forward

QCY T7 Volume Control

• QCY T7 Volume Control not support by earbuds, you can control volume adjusted by devices.

QCY T7 TWS True Wireless Earbud Feature:

Listen! That’s the Sound of My Heart

HIFI Wearing detection | Pairing animation | Smart App

T7 TWS Music Earbuds

• 13mm big driver HIFI sound quality
• Wearing detection Smart in-ear sensor
• Hall switch  Open lid to pair
• Pop-up window Tap to connect
• Smart APP Various functions
• 17.5hr battery life Type-C port
• Touch control Easy to use
• Master-slave switch Either one is master
• ENC Clear stereo calling

Outstanding Aesthetic User-friendly Design

The housing has been improved with curved charging case and textured coating so as to offer matte texture. Semi in-ear design delivers long-listen comfort.

An HD Stereo sound you’ll want to hear. Powered by A tiny 13 mm driver sits inside the headphones to deliver clear sound. Bluetooth 5.0 deliver a faster and more stable wireless connection to your devices.

13mm Big Dynamic Driver Bringing Impressing Sound Stage

High-end dynamic driver has been embedded in this tiny earbud seeking to provide large, wide sound space with more audio details. You will be steeped in its prominent audio performance.

• 13mm Big Dynamic Driver
• Bass Punchy
• Mid-highs Rich detailed

Put on to Play, Take off to Pause They Acting in a Response to You

A built-in Infrared Radiation Sensor in each earbud is able to detect whether you’re wearing one or both, and decide to play or not accordingly.

In-ear detection can be switched on/off in QCY App

Pairing Animation Popping up Upon Opening Lio

Thanks to Hall Switch, the earbuds will be paired whenever you open lid. Furthermore, pop-up window will auto jump out on your phone once you open QCY App or Bluetooth faculty on phone.
Just tap to connect.

‘Pop-up window is only available for Android system

Your T7, Your Decision Various Functions Added in QCY App

Mail Calendar Photos
Clock Weather App Store

With QCY App, you can customize T7 deeply from button to EQ

Please check User Manual and download QCY App
QCY App is available for device with system of Android 5.1 or above/os 11 or above
*The functions of checking earbuds’ last location and finding earbuds are only available when they are connected.

17.5 Hours of Long Battery Life Music Never Stopping

We update Type-C port for T7 to make charging more convenient.
With 380mAh charging case offering extra 4 top-ups, the total battery life reaches 17.5 hours.

380mAh |262 tracks |8 films
All the above data are measured by Hele Electronic Lab in 50% volume yet practical data may vary according to specific situation

One Touch to Go Easy Control

Simply place your finger over the touching panel to skip track or handle calls.
No more physical button, no more pressure on ear.

• Pause /play music: Double touch either earbud
• Answer/end call: Double touch either earbud
• Skip track forward: Keep touching either earbud
• Ignore call: Keep touching either earbud for 2s
• Voice Assistant: Triple touch either earbud

Dual-ear Information Sharing One Pair of Earbuds with Multiple Modes

Dual-ear information are shared in sync. Either earbud can serve as master. Seamless switch among left right and dual modes. Use it in your way

ENC Audio Technology Offering Crystal Clear Calling

Packed with advanced audio technology, the new Bluetooth 5.1 chip not only delivers noise-free calling but breathtaking music

Updated Hardcore Chip Fast and Unbreakable Connection

The new Bluetooth 5.1 chip provides a stable connection for hour upon hour of high-quality wireless streaming with low latency

Private Assistant at Your Service Just Give Your Order

Summon your private assistant to manage your day, just triple touch either earbud.
Enjoy entertainment, contact with friends, get information, listen to music and set reminders without taking out your phone.

Siri, what’s the weather today?

Xiaoai, call Mr. Jordan.

Siri, take me to Heathrow Airport.

Wireless to the truest. After a simple one-tap setup, T7 are automatically on and always connected. Using them is just as easy. The T7 experience is just as amazing whether you’re using them with your iPhone or Android.

Smart power, charge as you go Stay powered up wherever you are. The auto on/off stops your battery draining with smart charging in the carry case. No need to worry about battery life, just place your headphones in the carry case to charge on the g

Switch modes and share as you please. Breakaway from the limits of wired earphones. When a phone call comes, simply remove one earphone to automatically switch to single-side talk mode. You can even pass one earphone to a friend to enjoy a song together and bounce along to the beat

Light and comfortable to wear. Each individual earphone weighs just 4.8g and is carefully designed to adjust to your ear. The silicone ear tips help to reduce outside noise while improving comfort and stability for the best wearing experience.

Advanced Bluetooth 5.

The up-to-date Bluetooth 5.1 Technology ensures better sound quality, lower latency in playing game, more stable connection, and at the same time more power saving.

ENC Noise Canceling

QCY T7 is equipped with 4 Directional Mics, able to locate sound source and reduce background noise, so as to bring crystal-clear calling.

Pairing & Connecting Animation

Every time you open the charging case, QCY T7 will automatically connect to your phone with a pop-up animation. You can easily get the power remaining of each earbud and quickly access app to customize them (Require QCY App, animation not supported on iOS).

Wearing Detection

Built-in Infrared Sensors keep monitoring whether you are wearing the earbuds. Put on to play and take off to pause, all automatic.

Customize via APP

Through the QCY App, you can set your personal control settings and tune the equalizer to fit your favorite music. Also, you can customize the touch control settings.

18 hours Battery Life

With 380mAh charging case offering extra 4 top-ups, the total battery life reaches 18 hours. And equipped with Type-C port, making it convenient and efficient when charging.

Ergonomic design

The streamlined design fits more closely with your ears, brings a comfortable wearing experience.

Speacial Feature:

1. Sensitive Touch Control, All hearing control is at your fingertips.

2. Wake up voice assistant, Long press the touch panel to interact with Siri, Google Now, or Cortana voice-controlled smartphone assistants.

3. Power up to power on. Get up to six hours of battery life with an additional seven hours from the case that doubles as a wireless charger

4. Once pair, always connect. After a simple one-tap setup, QCY T7 are automatically on and always connected

5. Waterproof design. The earphones are IPX7 waterproof level, so you can use them while working out without worry

6. Main/Slave Setting, QCY T7 could have both earbuds connecting with the device. When a phone call comes, simply shut one earphone to automatically switch to single-side talk mode. You can even pass one earphone to a friend to enjoy a song together and bounce along to the beat.

7. Built for elite athletes, Adjustable, secure-fit ear-hooks for lightweight comfort and stability.

8. Powered by diameter 13 mm moving coil driver, QCY T7 boast powerful, balanced audio thanks to an entirely redesigned acoustic package that delivers pure sound reproduction, enhanced clarity, and improved dynamic range.

9. Exclusive APP, QCY T7 have settings that you can customize to suit your needs. Rename them, change how you control music, and more.

10. Pop-up windows, A pop-up should appear that shows how much battery you have left on each earbud and the charging case.

11. Automatic Ear Detection. By default, QCY T7 sense when they’re in your ear and receive the audio from your device. QCY T7 also pause and resume playback when you remove one of your QCY T7, or stop playback

Parameters

• Model: In2017 QCY-T7
• Bluetooth Version V5.0
• Standby time : max 60hr
• Charging time: max 2hr
• Music time: Max 3.5hr
• Talk time : max 3hr
• Operation range : 10M (with no obstacle)
• Battery type: li-ion
• Battery capacity (Earbuds):3.7V 35mAh
• Battery capacity (charging case):3.7V 380mAh
• input parameter (Case):5V 400mAh
• Bluetooth Profiles: HFP / HSP / AVRCP / A2DP

QCY T7 Specification

QCY T7 spec

• Bluetooth 5.0

• 4 hours listening on a full charge

• Charging case can charge earpieces fully 4 times

• Comes with USB-C cable

• Bluetooth range 10 meters

• Control Buttons on the earplugs itself

• Connection Automatic on pickup

• Microphone Yes, built-in

• Noise Cancelling Yes, ENC Noise Reduction

• Android/iOS Suitable for both Android and iOS

• App support Yes

• Mono Model Yes, possible

• Waterproof Yes, IPX4 (splash proof)

• Battery life earphones 3.5 hours

• Total battery life Charge 4 times, so 17.5 hours in total

• Charging time earphones 1.5 hours

• Charging time charging box 2 hours

• Standby time 120 hours

• Weight Unknown

• Accessories 1x Earplugs, 1x Charge Box, 1x User Manual and 1x USB-C Cable

• Sound channel Two-channel (stereo)

• Language English

• Main Materials Plastic,Abs

• Application Scope Sport

• Connectivity Wireless

• Features Surround Sound

• Colors: White

• Driver Unit: 13mm dynamic driver

• Music Time: 2h-3.5h

• Talk Time: 3 Hours

• Bluetooth Code: HFP / A2DP / HSP / AVRCP

• Speaker: Diameter 13 mm Moving

Warranty Card

Warranty Period 12 months after you purchase this item.(or you may inquire your local shopper for more details.) Free Service: Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:

Free exchange service will not be accessed under following circumstances:

1. Damages caused unauthorized disassembly. 2. Defects or physical damages caused by leaking or dropping off.
2. Damages by act of God.Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

Tips

1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.

Caveats

1. Never disassemble or modify your headset for any reasons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electricshock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/1V technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>