Q-TRAN QTM-eLED+WD-AWN LED Power Supply Installation Guide
- June 13, 2024
- Q-TRAN
Table of Contents
Q-TRAN QTM-eLED+WD-AWN LED Power Supply Installation Guide
Must be installed by licensed electrician.
WARNING
Risk of Fire / Electric Shock
Transformer should be installed by a Licensed electrician in accordance with
the N.E.C. and all local codes in force.
- Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
- This power supply must be installed according to the National Electric
- Code and local codes and ordinances.
- This power supply is to be installed and serviced only by an licensed electricians.
- This power supply is to be installed so that it is not likely to be contacted by people.
- To avoid a hazard to children, account for all parts and destroy all packaging materials.
- Do not install in wet locations.
Node And Conduit Entry Locations
RECESSED MOUNT
SURFACE MOUNT
NOTE: AWN-3 is available for QTM-eLED+WD and QTM-eLED+0-10V only.
Lutron Athena Node
Mounted in the secondary wiring compartment only
Conduit Entry Locations
Athena nodes must be installed on the secondary side of power supply center
and require 1.0” of clearance in order to optimally function. Metal conduit
must be 1.0” away from any node. Refer to the diagram above for
recommendations for conduit entry into secondary compartment.
Mounting Options
NOTE: Bracket can also be mounted (Top & Bottom) for Vertical Mounts.
ROD SUSPENSION (Horizontal)
SURFACE SPACING
SURFACE STACKING
ROD SUSPENSION
Driver with Lutron Athena Node
QTM-eLED-300W+WD-AWN-3
CSA Requirements
- Suitable for indoor use
- This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
- This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
- To avoid a hazard to children, account for all parts and destroy all packaging materials.
© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-08-03-23
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>