Q-Tran QTM-eLED+TW-AWN LED Power Supply Installation Guide
- June 13, 2024
- Q-TRAN
Table of Contents
Q-Tran QTM-eLED+TW-AWN LED Power Supply
Product Information
The LED Power Supply – QTM-eLED+TW-AWN is a low voltage lighting system compliant with CSA requirements. It is designed to work with Lutron Athena Nodes and Tunable White Modules. The product comes with various mounting options for both recessed and surface installation.
Specifications
- Class: 3425-15 3425-95
- Input Voltage: 120V – 277V
- Output Voltage: +24V
Installation
For optimal functionality, the Athena nodes must be installed on the secondary side of the power supply center and require 1.0 inch of clearance. Metal conduit should be kept at least 1.0 inch away from any node. Refer to the provided diagram for recommendations on conduit entry into the secondary compartment.
Mounting Options
The product supports the following mounting options:
- Recessed Mount (AWN-1)
- Surface Mount (AWN-2)
- Rod Suspension (Horizontal or Vertical)
WARNING
- Risk of Fire / Electric Shock
- Transformer should be installed by a
- Licensed electrician in accordance with the N.E.C. and all local codes in force.
Instruction
- Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
- This power supply must be installed according to the National Electric
- Code and local codes and ordinances.
- This power supply is to be installed and serviced only by an licensed electricians.
- This power supply is to be installed so that it is not likely to be contacted by people.
- To avoid a hazard to children, account for all parts and destroy all packaging materials.
- Do not install in wet locations.
Node And Conduit Entry Locations
Conduit Entry Locations
Athena nodes must be installed on the secondary side of power supply center
and require 1.0” of clearance in order to optimally function. Metal conduit
must be 1.0” away from any node. Refer to the diagram above for
recommendations for conduit entry into secondary compartment.
Lutron Athena Node
Mounted in the secondary wiring compartment only
Mounting Options
Driver with Lutron Athena Node
QTM-eLED-300W+TW-AWN-2: for interior
CSA Requirements
- Suitable for indoor use
- This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
- This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
- To avoid a hazard to children, account for all parts and destroy all packaging materials.
© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 |
203-367-8777 |
sales@q-tran.com |
www.q-tran.com
Specification subject to change. Rev-08-03-23
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>