DELTA APTI-AI504VA21-28W IP Camera User Guide

DELTA APTI-AI504VA21-28W IP Camera

Product Information

The IP Camera is a network camera product designed to provide high-quality video and pictures. It is important to carefully read and follow the instructions provided in this manual for proper usage. For additional tools and documents related to the product, please visit the official website at http://www.herospeed.net.

Statement:

Safety Precautions:
Avoid pointing the lens at strong light sources, as it may damage the sensor. Ensure that the power source meets safety certifications and requirements. Install lightning protection devices or disconnect the power when using the equipment during thunder and lightning conditions. Maintain a stable and smooth internet connection for high-quality video and pictures. Strengthen the protection of personal information and data security when the device is connected to the internet. Users are responsible for configuring passwords and other security settings properly and securely.

Product Usage Instructions

1. Network Setting:
2. Ensure that the computer’s IPv4 address is in the same network segment as the default IP address of the IP camera (192.168.1.168).
3. Prepare the network configuration:
4. Add an IP address to the Windows system:
5. Click Start -> Control Panel -> Network and Sharing Center -> Local Network -> Properties -> Internet Protocol Version 4 (TCP/IPv4) -> Advanced.
6. Click Add in the IP address (R) position and enter the IP address as 192.168.1.165 with the subnet mask 255.255.255.0. Click Add -> OK -> OK -> OK.
7. Connect the camera and PC using a network cable in the same LAN and power them on.
8. Network configuration steps:
9. Open Search Tool (Version 7.2.45.6 and above, install from http://www.herospeed.net).
10. Check 192.168.1.168.
11. Modify the relevant network parameters such as IP on the right side of the interface.
12. Enter the default user name (admin) and password (admin) of the device.
13. Click Modify -> Confirm.
14. Click Refresh to find the modified IP address indicating successful network configuration.

NOTE: Ensure that the IPC address and the computer’s IPv4 address are on the same network segment when configuring network parameters.

1. 1.   2.  **Modify Password:**

2. Open the IE browser and enter the IP address of the IP Camera (default: http://192.168.1.168).
3. Enter the default user name (admin) and password (admin) of the device. Click Login.
4. Click Modify, enter the new password, confirm the password, and set the security question. Click Export Key -> OK.

Please read this manual carefully and keep it properly before using our network camera products. Related tools and documents of products, please download from http://www.herospeed.net.

Statement

• Thank you for using our products, please read this manual carefully before trying.
• This manual is applicable to network series products.
• This manual may contain information that is technically inaccurate, inconsistent in the product’s function and operation, or in a typographical error. Our company will update the context in the manual according to the enhancement of product features. Updated content will be added in the new version of this manual without further notice.
• If there is a manual description of the product that does not match with the physical one, in order to prevail in kind.

Safety Precautions

• Please avoid installing the product in a vibration or shock environment, and keep the product away from electromagnetic interference (ignoring this may damage the product).
• In order to avoid heat accumulation, please keep good ventilation around the device, and do not block the vent of the device.
• Do not install indoor products in an environment that may be exposed to water or other liquids.
• Do not use the product in extremely hot, cold, dusty, or high-humidity environments.
• This equipment must be stored in a dry and non-corrosive gas environment, and avoid direct sunlight.
• Please avoid pointing the lens at strong light (such as lighting, sunlight or laser beam, etc.), otherwise, it will damage the sensor.
• Power must be under safety certification, Its output voltage, current, voltage polarity, and operating temperature must comply with the power requirements of this equipment.
• When using this equipment in thunder and lightning conditions, please pay attention to installing a lightning protection device or cut off the power.
• In order to get high quality video and pictures, make sure your internet connection is stable and smooth.
• When the device is connected to the Internet, it may face network security issues. Please strengthen the protection of personal information and data security.
• Please understand that you are responsible for properly configuring all passwords and other related product security settings, and keeping your username and password properly.

Network Setting

The default IP of all cameras is 192.168.1.168. The IPv4 address of the computer must be in the same network segment as the IP address of the IP camera. To enable the camera to access the network smoothly, plan the available IP network segments based on the actual network environment.

Prepare the network configuration:

1. Add the same network segment IP as 192.168.1.168 (camera factory default IP) in the computer, such as 192.168.1.165.

Steps to add an IP address to the Windows system:

• Step 1: Click [ ]Start → [Control Panel] → [Network and Sharing Center] → [Local Network] → [Properties] → [Internet Protocol Version 4 (TCP/IPv4)] → [Advanced] to enter the advanced TCP/IP setting interface.
• Step 2: Click [Add] in the IP address (R) position, enter the IP address as 192.168.1.165 and the subnet mask 255.255.255.0, and click [Add] → [OK] → [OK] → [OK].
  (2) Connect the camera and PC by network cable in the same LAN, and power on. Connecting as follows (PoE switch, camera, PC connection photo).

The network configuration steps are as follows:

• Step 1: Open [ Search Tool] (Version 7.2.45.6 and above, please install Search Tool from http://www.herospeed.net).
• Step 2: Check 192.168.1.168.
• Step 3: Modify the relevant network parameters such as IP on the right side of the interface
• Step 4: Enter the user name (default is admin) and password (default is admin) of the device.
• Step 5: Click [Modify] → [Confirm].
• Step 6: Click [Refresh] to find the IP address that has been modified, which means that the network configuration is successful.

NOTE:
When configuring network parameters, ensure that the IPC address and the computer’s IPv4 address are on the same network segment.

Modify password

• Step 1: Open the IE browser, enter the IP address of IP Camera (if the IP has not been modified, please enter the default address http://192.168.1.168), and press [Enter].
• Step 2: Enter the user name (default is admin) and password (default is admin) of the device, and click [Login].
• Step 3: Click[Modify], enter the password, confirm the password, and set the security question, click [Export Key] → [OK].

Real-time preview and parameter configuration

• Step 1: Click [Please download the browser plugin here, please close the browser when the download is complete], download the plug-in, close the browser, and follow the prompts to install the plug-in.

• Step 2: Open the browser and log in to the IPC WEB interface again to preview the real-time video.
  NOTE: If the browser you use is not IE, you can directly enter the preview video interface without installing a plug-in.

• Step 3: Click [Configuration] can enter the device configuration interface, there are local configuration, system, local network, video, image, event and other functional configurations. Users can set these functions according to the actual situation of the application scenario to achieve the best monitoring effect.

NVR adds IPC

Before adding devices, please make sure that the IP addresses of NVR and IPC are on the same network segment and do not conflict. Click [Channel] → [Camera] → [Search] under the NVR main menu, check the devices to be added, and click [Add].

NOTE:
In the main menu of NVR, you can also perform operations such as video settings, video playback, motion detection, and encoding parameter settings.

iVMS320 Client Access

• Step 1: Open your browser and visit http://www.hero-speed.net/.
• Step 2: Click [PC Client] → [iVMS320 (Windows)] or [iVMS320 (Mac)] to download the latest version of the video management system [iVMS320].
• Step 3: Follow the prompts to install and add devices to view and manage the devices.

Mobile App Access

Scan the QR code below to download and install the BitVision App.

After registering and logging in, you can add the device, and remotely view and manage the device on the mobile phone.

Disclaimer

The following exemptions or limitations of liability, please pay special attention:

• As a result of the following reasons, if the product interrupts or terminates the Service for any of the following reasons, the company shall not be liable for personal injury or property damage to you or a third party. Failure to install or use properly as required; for the sake of national or public interest; force majeure; your own or third-party reasons (including but not limited to the use of third-party products, software or components, etc.
• The company has not expressed or implied that this product is applicable to a special purpose. This product may not be used in medical / safety equipment or other applications where there is a breakdown of the product that could result in life-threatening or personal injury, as well as hazardous or non-humanitarian hazards such as weapons of mass destruction, biological and chemical weapons, nuclear explosions or any unsafe use of nuclear energy use. Any loss or liability arising out of the above use will be at your own risk.
• This product, when properly installed and used, can detect unauthorized intrusion during a particular delight but can not avoid accidents or personal injury or property damage. In your daily life, you should be vigilant and strengthen your safety awareness.
• The Company is not responsible for any indirect, incidental, special punitive damages, claims, loss of property or loss of any data or documents. To the maximum extent permitted by law, the liability for compensation of the company does not exceed than the amount you paid for this product.

http://www.herospeed.net.

References

• Herospeed Technology Limited
• Herospeed Technology Limited

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>