Newell Asvala Mini Power Station User Manual
- June 13, 2024
- Newell
Table of Contents
Newell Asvala Mini Power Station
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual
carefully and keep it for future reference. When transferring the product to a
third party, it is advisable to include the instructions.
- Do not expose the device to water or other sources of moisture.
- Do not throw, hit or shake the device – otherwise, it may cause damage to the parts inside and ultimately damage to the entire device.
- Keep the power station away from fire and other sources of high temperature.
- Store in a cool and dry place.
- Low temperatures (below 0°C) may affect the battery capacity.
- For use by adults.
- Do not charge the device longer than required. Unplug the device after full charging.
- When charging, to avoid interference, keep the device away from TV, radio, and other such devices. a 9. Run a full charge/discharge cycle at least once every 3-4 months to avoid shortening the life of the internal battery.
- In case of a long-term break in use, it is recommended to store it in a 50% fully charged state.
- Do not leave the charging power station unattended (e.g. while sleeping).
- During charging, the device may become warm. This is normal.
- Do not use a non-standard charger to charge the product.
- Be careful of short circuits that may damage the product.
- The device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device.
Maintenance
Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.
**PRODUCT DESCRIPTION
**
PRODUCT INSTRUCTION
How to provide power for DC12V appliances (such as headlamps, fans) with this product?
Plug your appliances to the DC output port and press power switch button to gain power. DC output rated current: 10A, max output current <13A.
Notices: Please confirm whether your DC12V appliance support charging
with 5.5mm/2.1mm DC header interface (The diameter of the DC port of the
product is: 5.5mm/2.1mm), otherwise it is unable to connect with the DC
output, you can consult the electrical manufacturer, buy the corresponding
adapter and connect with it.
Warning
Note : The DC output voltage is range between 12V~16.8V, the maximum output current is 13A. DC output voltage drops or increase while battery capacity drops or increase due to the chemical characteristics of the battery. If your appliance is not built-in input voltage stabilizing function, it may shut down when input voltage is too low or too high. If your 12 devices can not work due to input voltage is too high, please read the device manual or consult the device manufacturer to get the input voltage range of your device.
Protection Mode
Short-circuit/Over-current protection: If the DC output is short-circuited or over-current-ed (>13A), the unit will shut down to protect itself. Please clear the problem and press the power button of the unit to recover from protection mode.
How to provide power for AC appliances with this product?
Connect the power cable plug of the electrical appliance to the AC outlet of the product, switch on the power button and the unit will start providing power to your appliances.
WARNING: The AC outlets, AC voltage and frequency are different according to different countries; please carefully check whether the product specifications are consistent with the appliance specifications before use, otherwise it can lead to dangerous situations. When the AC port is not in use, turn it off to conserve power.
ATTENTION : AC outlets, AC output voltage and frequency will be different according to different countries or areas. Please refer to the actual product before using
Protection Mode:
Short-circuit/Overpower Protection: If the AC output is short-circuited or overpowered (Load(s) power >80W), the unit will shut down AC output to protect itself. Please clear the problem and re-press the AC button for AC output. Some devices, such as a refrigerator, ice maker or laser printer may require a surge power to start or work during a very time period, the surge power could exceed 120W or even higher, which could cause overpower protection with this unit. Please remove the devices and consult with the device manufacturers for more information. Please clear the problem and re-press the AC button for AC output.
How to provide power for USB digital appliances with this product?
Connect the standard USB cable of the digital appliance to the USB output of the unit, and press the ” Use ” to turn on the USB output.
Notice :
Some smart devices, such as Bluetooth headphones and LED lights require very
small input current to charge, which could be less than 150mA. The unit may
fail to charge these kind of smart devices due to detection current limitation
by the USB output ports. On this occasion, user can long press the power
button ” DC ” for 3-5 seconds to keep the USB port output running USB Please
turn off the power when the smart devices are fully charged to save power.
Quick Charge Output:
This product supports QC 3.0 and USB C PD (Power Delivery) Output, support: 5V/3A, 9V/2A.1 2V/1.5A 18W max output for smart devices which also support QC 3.0 or USB PD. The actual output voltage and current depend on the actual smart devices, it can be obtained by consulting the smart device manufacturer.
Wireless Charge :
This unit support wireless charging, place the smartphone, tablet or any wearable electronics that support wireless recharge on the ” (4) ” surface of the unit and press the “DC/USB” button, the unit will start charging your devices.
Notice : Due to wireless charging design and protocols vary from different device manufacturers, not all devices are compatible to this application or to gain enough charge current rated by the devices.
How to use the LED torch
This unit is built with an ultra-bright LED torch. Press the button “- ” to switch on the LED torch and single press the button to switch to blink mode/SOS mode, Press the button to switch off.
Warning: Do not point directly at the eyes of humans in case of any
damage due to the strong light.
How to use the Led light panel
This unit is built with LED Light panel. Press the ” ” button to switch on the light panel and single press the button to switch brightness, press the button again to switch off
Warning: Do not point directly at the eyes of human in case of any damage
due to the strong light.
How to charge the unit?
Charge through AC Wall Charger
Using the included AC Wall Charger, plug the unit into any wall outlet to charge the unit. You will know the unit is charging when the blue LED battery indicators are blinking. The unit is fully charged when all battery indicators stop blinking and remain solid. After the unit is fully charged, please remove the AC wall charmerin time
Charge from solar panel (not included)
- Make sure Voc (open circuit voltage) of the solar panel does not exceed 22V.
- Place your solar panel where it will get as much direct sunlight as possible.
- Plug the output of the solar panel into the input of the unit to start charging.
You will know the unit is charging when the blue LED battery indicator lights up and blinks. The unit is fully charged when all battery indicators stop blinking and remain solid.
The manufacturer reserves the right to change the information contained in this manual without prior notice.
SPECIFICATION
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic, batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
40 Newell products are covered by a 40-month WARRANTY manufacturer’s warranty. venue
MADE IN CHINA ****
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>