Lasko T48401 48 Inch Tower Fan With Alexa Connectivity Instruction Manual

: June 5, 2024
: Lasko

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
Parts Included
Assembly
Controls
Overriding Remote Functions (Perform one of the steps below)
Connecting to Alexa
MAINTENANCE

T48401 48 Inch Tower Fan With Alexa Connectivity
Instruction Manual

Lasko T48401 48 Inch Tower Fan With Alexa Connectivity

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates

Register Your Product Today
www.lasko.com/product-registration/
You will benefit from:
– Efficient and enhanced support
– Future product updates

Have a Question? Need a Part?
Please Do Not Return Product to Store!
Contact Lasko Customer Service:
800-233-0268 Monday-Friday 8AM – 5PM EST.
(Valid in the USA, its Territories, and CANADA Only)

READ AND SAVE THESE INSTRUCTIONS
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!
This Fan is for residential use only. It is not intended to be used in commercial, industrial or agricultural settings.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be followed to reduce the risk of fire, electrical shock, and injury to persons:

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR PERSONAL INJURY, ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

DO NOT use this Fan to ventilate areas where flammable liquids or vapors are used, stored, or are present, including paints, gasoline, varnishes, floor refinishing products, or solvents. ALWAYS read and follow all warnings and instructions on the containers for these products!
ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this condition should be replaced by a qualified electrician.

ALWAYS unplug the power cord when servicing, cleaning, or moving the Fan. DO NOT use the ON/OFF switch as the sole means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and unplug the fan when not in use.
BE CERTAIN that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or another power source.

The Blue Plug ™ on your Lasko Fan is a safety feature. It contains a non- replaceable safety device (fuse) that should not be removed or tampered with. To reduce the risk of fire, electric shock and personal injury , DO NOT attempt to remove, replace, repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incorporated in this plug.
THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one way. Match the wide blade to a wide slot in the outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.

AVOID the use of extension cords, power strips, power taps, outlet-style air fresheners, or other cord-connected devices, as these devices may overheat and cause a fire hazard.
DO NOT route power cord under rugs, carpets, runners, or furniture. This may damage the cord or cause it to overheat creating a fire hazard.
ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
DO NOT block, cover or obstruct airflow to or from the Fan while in operation.
DO NOT use this Fan outdoors or near water or wet locations such as a bathtub, pool, or hot tub. The use of this Fan in a wet location may create a shock hazard.
DO NOT run cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances.
Arrange cord away from traffic area and where it will not be tripped over.
NEVER use a single extension cord to operate more than one Fan or another electrical device.
DO NOT use this Fan if it has been damaged or is not functioning properly.
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008). This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry, or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008). This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for hazardous locations.

Model T48401
Lasko Products, LLC
820 Lincoln Avenue
West Chester, PA
19380
www.lasko.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment.
“NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.”

SAVE THESE INSTRUCTIONS

Parts Included

Lasko T48401 48 Inch Tower Fan With Alexa Connectivity - Parts
Included

Assembly

Lasko T48401 48 Inch Tower Fan With Alexa Connectivity -
Assembly

Controls

Power Button
Turn Fan ON/OFF by pressing the Power Button.

Timer Button
The timer can be set up to 8 hours. Continue pressing the Timer Button to reach the desired time setting.

Oscillation Button
Press the Oscillation Button to start and stop the oscillation function.

Fan Speed Button
Fan Speed can be adjusted to 1, 2, 3, or 4.

Nighttime Button
The lights on the Fan will dim by 50%. The fan will run on Speed 4 (Highest) for one hour, change to Speed 3 for one hour, change to Speed 2 for one hour, then finally switch to Speed 1 (Lowest) until the user interacts with Fan.

Overriding Remote Functions (Perform one of the steps below)

Unplug the unit from the wall.
Press the Power Button ( ) to turn off the product.
Reset the product to forget any connected devices (factory reset – hold Power ( ) and Nighttime ( ) Buttons for 5 seconds).

Connecting to Alexa

For Alexa Pairing instructions, please see the Alexa Pairing Guide or visit: https://www.lasko.com/products/smart-ultra-air-performance-tower-fan-t48401

MAINTENANCE

To reduce the risk of electrical shock and fire please observe the following instructions:

– Always unplug the cord before moving, servicing, or cleaning.
– NEVER place the Fan in or near water.
– Clean the Fan only with a vacuum equipped with a brush attachment; the vacuum will remove the lint and dirt from inside the Fan.

– NEVER attempt to take apart the Fan.
– Clean the body of the Fan with a soft cloth only.
– NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.

TROUBLESHOOTING TIPS

If your Fan fails to operate, see below for a list of probable causes and solutions:

Be sure the power cord is plugged into a working electrical outlet.

SERVICING: For servicing, other than general user maintenance, please contact Customer Service at800-233-0268, Monday through Friday, from 8 am-5 pm Eastern.

STORAGE: Store the Fan with these instructions, in the original carton in a cool, dry place.

LUBRICATION: Motor is permanently lubricated.

DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or visit www.1800recycling.com®.

LASKO PRODUCTS, LLC LIMITED WARRANTY(VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)
WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization (“RA”). DO NOT return products without an RA or the warranty claim will not be processed.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of the accident, improper handling or operation, shipping damage, abuse, misuse, unauthorized repairs made, or attempted. This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS, AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACEMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.
Some states and provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.
Proof of purchase is required before a warranty claim will be accepted.

CUSTOMER SERVICE:
Toll-Free 800-233-0268. Email: producthelp@lasko.com
Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be
reached Monday through Friday, 8 am-5 pm Eastern. Please have your model number available, as well as the type and style
(located on the underside of your product).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Please do not send the product to this location) www.lasko.com
Manual printed in China

Alexa® Pairing Guide – T48401
For use with Lasko® Alexa Compatible Products

Zero Touch Setup

Plugin Alexa enabled Fan.
Say “Alexa, discover devices” to a qualifying Amazon device that is connected to your WiFi network.
This will establish a connection to the new device, and automatically share the WiFi credentials it is using as well as add the new device to the user’s list of devices. This feature is only available one time when a product is purchased on Amazon, and the user has selected “Link to my Alexa account to simplify setup”.

User Guided Setup with Barcode

1. Download the Alexa App (Google Play Store or Apple App Store), and follow instructions in the App to log in or create an account.
2. Plug in your Lasko Fan, and press Power Button ( ) to turn on.
3. Open the Alexa App on your phone or tablet, and navigate to the App’s home screen. From here select the tab at the bottom labeled “Devices”.
4. Press the “+” button, then select “Add Device”.
5. On the next screen, select the type of device that you would like to add (Fan).
6. You will then be asked to select the brand of product. Scroll through the list and select Lasko.
7. Follow the instruction on the screen until you can select “Scan Barcode” (note: there will be an example of the barcode on the select “Scan Barcode” screen).
8. Hold down Power ( ) and Nighttime ( ) Buttons (5 seconds) until the product display begins to rotate.
9. Use your smartphone/tablet’s camera to scan the 2d barcode on the rear of your Lasko product.
10. Your Lasko product should be connected shortly after scanning the barcode. Follow instructions on your smartphone/tablet’s screen to complete setup, and begin using your Lasko product.

User Guided Setup without Barcode

Download the Alexa App (Google Play Store or Apple App Store), and follow instructions in the App to log in or create an account.
Plugin Lasko Fan.
Open the Alexa App on your phone or tablet, and navigate to the App’s home screen. From here select the tab at the bottom labeled “Devices”.
Press the “+” button, then select “Add Device”.
On the next screen, select the type of device that you would like to add (Fan).
You will then be asked to select the brand of product. Scroll through the list and select Lasko.
Follow the instructions on the screen until you can select “Don’t Have a Barcode?” (Note: There will be an example of the barcode on the screen where you select this option).
Select “Don’t Have a Barcode?”.
Hold down Timer ( ) and Nighttime ( ) Buttons (5 seconds) until the product display begins to rotate.
Your Lasko product should be connected shortly after activating the connection process of inputting specific buttons on the product. Follow instructions on the screen to complete setup, and begin using your Lasko product.

Factory Reset

To reset the product to the factory settings (the product will forget WiFi credentials, and no longer be controlled by the Alexa App or by Alexa voice commands) while the product is turned off hold the Power ( ) and Nighttime ( ) Buttons for 5 seconds. When this is a feature activated, the product will automatically be put into setup mode, and the display will begin to rotate in a clockwise manner. The product can still be operated by the physical buttons on the product.

NEW 10/21
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates
T48401_QPGES