CEL-FI J11-900-100 Compasss XR Scanning Receiver Owner’s Manual
- June 9, 2024
- CEL-FI
Table of Contents
CEL-FI J11-900-100 Compasss XR Scanning Receiver
The Cel-Fi COMPASS XR scanning receiver is the complete solution to enable integrators to install and optimize Cel-Fi cellular and public safety coverage systems. A convenient tool in a lightweight and portable package, it can be used globally to deploy and verify multiple technologies, including 5G New Radio networks in sub-6 GHz spectrum, LTE, CBRS, and LMR public safety coverage.
Key Features
- Easily perform grid tests and site surveys with portable, handheld RF scanner.
- Ideal for deployment of Cel-Fi QUATRA cellular & RED public safety systems.
- Single tool for a wide variety of networks with deep
- 5G-NR/4G-LTE/CBRS/FirstNet/LMR service scanner.
- Supports operator service bands worldwide with ultra-wide frequency range of 617-5000 MHz.
- Comes with all necessary accessories, including carrying case, hard storage case, antennas, and RF adapters.
- Protected from drop, scraps and tumbles with rugged rubberized exoskeleton that provides a comfortable grip.
- Works with Cel-Fi WAVE PRO app (iOS & Android) for all operations, including Full Signal Report export (.CSV) and more.
Hardware
| Item | Type |
|---|---|
| Processor | Single Board Linux Computer |
| Battery | Two rechargeable 3500 mAh, 3.7V protected 18650 cells (Included) |
| Charger | Included, with plug adapter types A, C, G & I |
| Accuracy | +/- 2dB |
| Weight (With Batteries) | 1.61 lb (730g) |
| Size (With Exoskeleton) | 4.7” W x 1.6” D x 8” H |
| Shipping Dimensions | 15.75” W x 12.75” D x 7.5” H |
Interfaces
| Item | Type |
|---|---|
| Charging | USB-C |
| Antenna Ports | SMA Male (Three: Main, MIMO, LMR) |
| Power Button | LED illuminated button |
| LED Indicators | Three: Power, Status and Charging |
| Bluetooth (LE Ver 4.2) | Frequency: 2402 – 2480 MHz. Power: 0 dBm. Connects to |
Cel-Fi WAVE PRO App for UI
WiFi Access Point| Software upgradeable; enabled only when a Software Upgrade
is in progress, while charging.
Band Support
| Item | Type |
|---|---|
| 5G NR | n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48/n66/n71/n77/n78/n79 |
| No. of Cells |
B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B18/B19/B20/B25/B26/B28/B29/B30/B32/B66/B71
Dimensions (mm)| B34/B38/B39/B40/B41/B42/B43/B48
Weight (kg)| 758-775 / 851-861 MHz
CBRS*| 3550 – 3700 MHz
*enabled in future software release.
Included Accessories
Cases
The COMPASS XR comes in a complete kit containing the accessories needed to connect the device to Cel-Fi equipment, from industrial QUATRA boosters to antennas. The kit also includes these two cases:
| 
Carrying Case
- Designed for extended use in a variety of carry configurations
- One-shoulder sling or two-shoulder backpack, straps included
- Integrated belt clip
- Internal pouch for spare antennas
| Hard Case
- Rugged carry-on-sized transportation case
- Die-cut foam secures all included equipment
- Store COMPASS XR in its Carrying Case or separately
- Extra space for additional cables and connectors
In The Box
| Item | Type |
|---|---|
| RF Cable | SMA Female to N-type Male (2 meter length) |
RF Adaptors
| N-type Female to N-type Female
N-type Female to QMA Female
N-type Female to 4.3-10 Female
Antennas| Three (3) 5GNR/UHF 410-5925MHz (Replacement model: Nextivity
A21-ML3-600)
Battery Charger| 5V, 3.2A USB-C charger with 1m cable & global plug adapters
| Item | Calibration Certificate (LMR 700/800, US only) |
|---|---|
| Certifications | FCC |
CE
User Interface
CEL-FI WAVE PRO
The User Interface for Cel-Fi COMPASS XR is Cel-Fi WAVE PRO. This free mobile app (iOS and Android) pairs with COMPASS XR, allowing integrators to install and optimize Cel-Fi systems without the need for local internet connectivity.
COMPASS XR performs a variety of installation and testing operations using WAVE PRO. Here are three examples:
| 
| 
Full Signal Report & Band Selection
Select the technologies, bands, and frequencies needed for quick and
efficient scans. COMPASS XR collects all the data needed for the selected
bands and saves time by excluding unnecessary frequencies. Get the Full Signal
Report at the current location, and the WAVE PRO App saves selections for
quick reuse at the next site.| Grid Test
Collect site survey data for public safety or cellular coverage, or even
both at the same time, using WAVE PRO’s Grid Test. Whether performing an
initial site survey or post-install acceptance testing, COMPASS XR works with
the WAVE System to ensure a successful Cel-Fi installation.| Antenna
Positioning
Easily find the ideal position for your donor antenna. Connect the donor
antenna to COM- PASS XR and the WAVE PRO App will guide you through the
positioning process, automatically calculating the optimal direction to point
the antenna per operator.
Asia Pacific | EMEA | Americas
Copyright RF Industries Pty Ltd 2022. Subject to change without notice.