8BitDo N64 Mod Kit for Controller Joystick Instructions

8BitDo N64 Mod Kit for Controller Joystick

Please handle it with care.We are not responsible for any damage caused in use.

WHAT IN BOX

INSTALLATION

Instruction manual

• Press Start buttcn to tum on the controller.
• Hold start button for 3 seconds to tum off the controller.
• Hold Start button for 8 seconds to force the controller to shut down.

Switch

Please ensure your Switch system is the latest version. Bluetooth

1. Turn the mode switch to [SJ.
2. Press Start to tum on the controller.
3. Hold pair button for3 seconds to enter its pairing mode, LED starts to blink rapidly. (This is required forthe veryfirsttime only]
4. Go to your Switch Home page to click on [Controllers], then click on [Change grip/order] and waitforthe connection.
5. LED becomes solid when the connection is successful.

Wired Connection

Go to System Setting > Controllers and Sensors> tum on Pro Controller Wired Communication

1. Turn the mode switch to [SJ.
2. Connect the controller to your Switch dock via USB cable.
3. Wait till the controller is successfully recognized by your Switch to play

Android / Windows

Bluetooth

1. Turn the mode switch to [DJ.
2. Press Start to tum on the controller.
3. Hold pair button for3 seconds to enter its pairing mode, LED starts to blink rapidly. (This is required for the very first time only)
4. Go to your Android/Windows device’s Bluetooth setting and pairwith [SBitDo N64 Modkit].
5. LED becomes solid when the connection is successful.

Wired Connection

1. Tum the mode switch to [DJ.
2. Connect the controller to your Android/Windows device via USB cable, then wait till the controller is successfully recognized byyo..-Android/Windav.s device to play.

Turbo

• D-Pad,joysticks, Star button are not supported.
• Star button equals to screenshot when connected to Switch.
• Hold the button you would like to set turbo functionality to, then press the star button to activate/deactivate its turbo functionality.

Battery

About 8 hours of playtime with a 500mAh built-in battery pack, rechargeable with 1 to 2 hours charging time.

LED indicator status:

• Charging LED stays solid
• Fully charged LED light out
• Low battery LED blinks

lt will automatically shut down if it is not connected within1 minute or if there is no operation within 15 minutes after startup.
It will not automatically shut down when it is on wired connection

Support
Please visit support8bitdo.com for further information & additional support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>