Kmart 43340811 2 Wire Drawer Unit Instructions
- June 17, 2024
- Kmart
Table of Contents
Kmart 43340811 2 Wire Drawer Unit
Product Information
Specifications
- Model Number: K: 43-340-811 | T: 68-727-291 2 WIRE DRAWER UNIT
- Maximum Safe Loading Weight: 10kg for top panel, 5kg for each drawer
- For Indoor Use Only
Product Usage Instructions
Assembly Instructions
To assemble the wire drawer unit, please follow the steps below:
Step 1
Place either cardboard or a blanket on the floor to protect both the floor
and the drawer unit during assembly.
Step 2
Using a screwdriver (not provided), attach A screws (4PCS) to the
designated holes on the unit.
Step 3
Attach B nuts (4PCS) to secure the screws in place.
Step 4
Attach C screws (4PCS) to the remaining holes on the unit.
Step 5
Place D washers (4PCS) on top of the C screws.
Step 6
Using the provided spanner (1PC), tighten the C screws until the unit is
fully assembled. Do not over tighten.
Hardware List
- A Screw (4PCS)
- B Nut (4PCS)
- C Screw (4PCS)
- D Washers (4PCS)
- E Spanner (1PC)
Required Tools
- Screwdriver (Not Provided)
- Mallet (Not Provided)
Important Notes
- Do not tighten the screws until the product is fully assembled.
- This product is for indoor use only.
FAQ
Q: What is the maximum weight limit for the top panel and each drawer?
A: The maximum safe loading weight is 10kg for the top panel and 5kg for
each drawer.
Q: Are the required tools included with the product?
A: No, the screwdriver and mallet are not provided. You will need to have
these tools available for assembly.
Q: Can I use this product outdoors?
A: No, this product is designed for indoor use only.
Assembly Instructions
K: 43-340-811 | T: 68-727-291 2 WIRE DRAWER UNIT
ATTENTION : While assembling sections D and E and using a mallet, plastic chips may be released, this is normal and should not be of concern. Place either cardboard or a blanket on the floor so that both the floor and the drawer unit will be protected during assembly. MAXIMUM SAFE I OADING WEICHT. 10KC FOP TOD DANEI EKE FOR FACH DRAWED
Hardware list
PARTS
INSTRUCTION
DO NOT TIGHTEN THE SCREWS UNTIL THE PRODUCT IS FULLY ASSEMBLED. FOR INDOOR USE ONLY
INSTALLATION
