Cub 25EH Home Safe Fireproof Waterproof User Manual
- June 16, 2024
- Cub
Table of Contents
Cub 25EH Home Safe Fireproof Waterproof
SAFE-DEPOSIT BOX INSTRUCTION MANUAL
If there is any issue, please contact us : support@homesafe.vip
COMPONENT DESCRIPTION
- Removable shelf
- Emergency keyhole
- Lamp
- Socket for external battery box
- Indicator light
- Reset button
- Digital keys
- Battery box
Open the door with ke y
Open the door with key
- Dear valued customer: Thank you for choosing our products! You have taken an important step in organizing and protecting your most valued possessions. Every series of our safes is professionally made and designed to provide safety. Please take time to read and familiarize yourself with the proper operating procedures of your new safe presented on the following pages.
- Initial Use
Find the emergency keys in the accessories’ bag: Remove the emergency lock cover; Insert the emergency key, press gently and turn it anticlockwise, clockwise turn the master key at the same time to open the door;
CAUTION. Finish operation pull out the emergency key and keen it in a café enlace
Open the door
- The preset code is 159, you can set your own code
- Input the correct code, each pressing will result one buzzer beep and yellow smile light flashe:
- Press # / * to confirm and green ok light will on if your code is correct
- Rotate the knob clockwise and pull outward within 6 seconds, the door will be open
CAUTION: You can open the safe with preset code before setting your own code
- Close the door
**** Turn the knob anticlockwise to close the door.
Automatically locked
- Three continuously wrong entries will activate the warning beep for 20 seconds;
- Another three continuously wrong entries will activate the warning beep for 5 minutes.
CAUTION: The key pad would be disabled during the beeping. You can only stop the beeps by opening the safe with emergency key and power-cut by removing the battery.
Set the user code
- Open the safe and keep it unclock until there is no light on the screen.
- Press the reset button behind the door, the yellow smile light will flash twice and you will hear buzzer beep
- Input your new code and press # / * to confirm,
- Yellow smile light will flash twice and you will hear 2 buzzer beep, it means your new code is successfully set
Set the Master code
- Open the safe and keep it unclock until there is no light on the screen.
- Press 0 button twice, then press the reset button behind the door, the yellow smile light will flash twice and you will hear 2 buzzer beep
- Input your new code and press # / * to confirm
- Yellow smile light will flash twice and you will hear 2 buzzer beep, it means your new code is successfully set
Mounting
- Drill holes for expansion bolts(or clamping screws) in the right place;
- Turn the expansion bolts anticlockwise to separate;
- Use the expansion bolts(or clamping screws) to secure the case to the wall;
- Make sure the case is mounted in place as required and then tighten all screws.
CAUTION: Use the expansion bolt when there is a concrete wall surface. Use the clamping screw when there is a wooden wall surface.
Parts list
Please keep the emergency keys out of the safe.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>