TECBOSS GLD-1005 Natural Energy Lamp User Manual
- June 5, 2024
- TECBOSS
Table of Contents
GLD-1005 Natural Energy Lamp
User Manual
How to Use
-
Install Support (See Picture 1)
-
Set up Lighting Temperature
Press the power button to switch the color temperature from daylight, natural light, and warm light. -
Set up Lighting Brightness
Press the +/ – button to adjust the brightness. Short press to adjust for 5 levels of brightness. Long press to customize your desired brightness and then release the button. -
Timer
Press the Timer button to set a 10/ 20/ 30/ 60 minutes timer. The light will turn off itself with the end of the setting time. Short press to turn off the timing function.
Thank you for purchasing this product. To ensure proper use and trouble-free operation, please read the user manual before use.
Package including
1 | LED Light Diffuser | 6 | Increase Brightness |
---|---|---|---|
2 | Support Stand | 7 | Decrease Brightness |
3 | Power / Light Temperature | 8 | AC/DC Adapter |
4 | DC Port | 9 | RF Remote Control |
5 | Timer |
Reminder
-
Before use:
Please do not use the natural energy lamp, if you have an eye disease such as cataracts, glaucoma, diseases of the optic nerve, and inflammation of the vitreous humor, etc.
Please consult your doctor before use, if you have diabetes or you are taking medication such as pain relievers, anti-hypertensive, antidepressants, etc. -
When using:
1. Please do not stare at the light of the appliance or it may hurt your eyes.
2. Please start with a short period of illumination at the beginning, and gradually increase the light exposure time.
3. The most effective period of the treatment is from 6 am. to 8 pm. and we recommend using it every day.
4. Keep using the lamp in a poor light season for at least 7 consecutive days or even longer, depending on your individual needs. -
After use:
Eye pain and headaches may arise after the first use. These will disappear later, as
the nervous system accustoms to the new stimulation.
Warranty
This product has a one-year warranty from the date of purchase. The warranty
does not apply to products that have been lost, altered, broken, or damaged by
misuse or failure to follow the instruction provided with the product.
For any inquiries concerning our products, or if you want to apply for a
replacement or refund, please feel free to contact us at:
support@tecboss.com
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
C &E Connection
E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933,
Frankfurt am Main, Germany
Email:info@ce-connection.de
Phone: +49 (069) 27246648
Remote Control
-
ON/OFF Button
Press the button to turn on/ off the natural energy lamp. -
Timer Reset Button
Short press the button to turn off the Timer. -
Different Time Settings
Press the 10/ 20/ 30/ 60 minutes button for different timing settings. -
Lighting Brightness Levels Adjustment
Press the button to adjust the brightness. Short press to adjust for 5 levels of brightness. Long press to customize your desired brightness and then release the button. -
Lighting Brightness Levels Selection low , middle , and high brightness levels are available.
-
Lighting Temperature Selection. Daylight , natural light, and warm light are available.
Need Attention:
To avoid interference by other remote controls with the same frequency, please
pair the lamp with the remote control when using it for the first time.
Pairing method: Hold the Timer Reset Button for 5 seconds until the 4 timer
indicators(10/20/30/60 minutes) all light up. The pairing is successful after
the indicator lights go out.
Specification
Adapter Input Voltage | AC 100-240 V |
---|---|
Device Input Voltage | DC 24V. 1A |
Power Rating | 2-20W |
Daylight | 5500-5700 K |
Natural Light | 4000-4200 K |
Warm Light | 2800-3000 K |
Materials | ABS+PC |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>