SDC 33A/35A Series LRVD2L VON Duprin Latch Status Switch Kit Instruction Manual
- June 13, 2024
- SDC
Table of Contents
SDC 33A/35A Series LRVD2L VON Duprin Latch Status Switch Kit Instruction
Manual
INSTALLATION INSTRUCTIONS
Attach cable tie to the opposite side of the device with the #10 self-tapping
screw provided. Carefully route cable over device head making sure NOT to
impede the movement of the latch assembly. Secure cable in the cable tie and
carefully route the cable down the inside wall of the extrusion.
Attach Latch Switch
assembly to 33 series device head with the two #10 x 3/4” screws provided.
SWITCH SPECIFICATION
- RED: N/C
- GRN: N/O
- WHT: COM
- 3AMP @: 125VAC
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email engineer@sdcsecurity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>