BEGA 50 093.5 LED Wall Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
Technical amendments reserved
50 093.5
Wall luminaire for indoor use
Instructions for use
Application
Enclosed and free-radiating wall luminaire made of hand-blown opal glass, with
metal housing, for all lighting tasks in interior applications.
Product description Metal luminaire housing, finish Colour velvet black
Hand-blown opal glass
Metal shield, finish colour velvet black 2 mounting holes ø 4.5 mm
Distance apart 138 mm 2 cable entries for through-wiring for mains cable up to
ø 10.5 mm max. 3 × 1.5@
Connection terminal 2.5@
Earth conductor connection
LED power supply unit
220-240 V y 50-60 Hz
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components Safety
class I
– Safety mark
****– Conformity mark
Weight: 1.1 kg
This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547. To achieve an additional
protection against e. g. transients, etc. we recommend separate overvoltage
protection components. You can find them on our website at
www.bega.com.
Lamp
| Module connected wattage | 7.9 W |
|---|---|
| Luminaire connected wattage | 10 W |
| Rated temperature | ta = 25 °C |
| Ambient temperature | ta max = 25 °C |
50 093.5 K3
Module designation| LED-0589/930
Colour temperature| 3000 K
Colour rendering index| CRI > 90
Module luminous flux| 1040 lm
Luminaire luminous flux| 529 lm
Luminaire luminous efficiency| 52,9 lm / W
Installation
The luminaire must only be operated with the complete protective cover.
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping.
Lead the mains supply cable through the cable entry into the luminaire
housing. Fix the mounting plate with enclosed or any other suitable fixing
material onto the mounting surface.
Be sure to use the gasket rings supplied.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection. Insert
the glass into luminaire housing and fix it by screwing the shield hand-tight
clockwise onto the glass.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt. Defective
glass must be replaced.
Replacement of the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Defective glass must be replaced. Close the luminaire.
Spares
| Spare glass | 11 003 166 .1 |
|---|---|
| LED power supply unit | DEV-0177/350 |
| LED module 3000 K | LED-0589/930 |
| Shield | 72 000 862 M1 |
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
info@bega.com
www.bega.com
Documents / Resources
| BEGA
50 093.5 LED Wall
Luminaire
[pdf] Instruction Manual
50 093.5 LED Wall Luminaire, 50 093.5, LED Wall Luminaire, Wall Luminaire,
Luminaire
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>