Homiefans B0BHW4VXTQ 22 Inch Ceiling Fan with Lights Instruction Manual

Homiefans B0BHW4VXTQ 22 Inch Ceiling Fan with Lights

SAFETY RULES

1. To reduce the risk of electric shock, turn off the electricity to the fan at the main fuse box or circuit panel before beginning.

2. All wiring must be in accordance with the local electrical codes or National Electrical Code. Electrical installation should be performed by a qualified licensed electrician.

3. To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp edges

4. Make sure the installation site you choose allows clear space for the blades to rotate and at least 6.5 feet of clearance between the floor and the fan blade tips.

5. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount fan only to an outlet box marked acceptable for fan support and use mounting screws provided with the outlet box. Most outlet boxes commonly used for
   the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

6. The outlet box and ce山ng support structure must be securely mounted and capable of supporting at least 10 KGS.

7. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.

8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.

9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

10. Electrical diagrams are for reference only.

11. The fan is more suitable for indoor use.

TOOLS REQUIRED

Phillips screwdriver

Flat blade screwdriver

Step ladder

Wire stripper

Electrical tape

PACKAGE INCLUDES

Once received your package, please check if you have the followings, if there is a part missing, please contact us.

1. Ceiling Fan Light X 1
   

2. Bracket X 1

3. Accessories Package X 1 (4 x Expansion Screw, 4 x Plastic Expansion Tube, 2 x Wire Nut)
   

4. Product Manual X 1
   

5. Remote Control X 1
   
   Please note that all accessories are placed in the foam corner. Do not throw away the carton and foam.

INSTALLATION DIAGRAM

Standard Ceiling Installation| Decorative Ceiling Installation| Sloped Ceiling Installation
---|---|---
General guideline is available for concrete ceiling.| The decorative ceiling(wooden) must be reinforced to be able to bear the weight of 10kg. And the thickness of the board shall be less than 1.18 inches. Please reinforce it in advance before installation.| No angled limited. As long as you like, beyond your imagination. If you want to enjoy downward airflow, angle ranging from 0-20°  is recommended.

Circuit Diagram

Live Wire (Black)
Neutral Wire (White)
Earth Wire (Green)
Note: The black wire and white wire can be interchangeably connected to the junction box which does not affect the performance of fan/light. And it is also safe.
Remote control available only when fan/light powered on from wall switch.

Thank you for choosing fan products! Create a smart life for you!

REMOTE CONTROL

Instructions for intelligent fan lamp control

• Remote control code matching: press this key once within 5 seconds after the lamp is powered on. A flash of light indicates successful code matching. Otherwise, turn off the power of the lamp. Then repeat this step.
• The remote can only control the fan and light after the successful code matching with the driver
• Fan forward speed regulation 1-6, fan reve「se speed regulation 1-3
• Remote control code clearing: long press the light on button within 5seconds after turning on the light, and the guide light flashes.
• Note: The remote controller  is limited to one-to-one use of supporting lamps and is not applicable to control of other electrical products.

APP CONTROL

Instructions for Intelligent Fan Lamp Control

(Mobile APP)

Welcome to use our company’s products.Our fan light also can be controlled by mobile phone APP.Here is the APP Connection Guide on iPhone or Android:

1. Use mobile phone to scan the QR-Code above and install the mobile phone Smart Home APP software according to the prompts.
2. Click the icon on the upper left corner of the Smart Home to check the instructions of the Fan lamp Pro.Please carefully understand the istructions for software pairing and software use.

Note:

1. When using the mobile phone APP light control. you need to turn on the Bluetooth function in the mobile phone settings.
2. If there are any problems about connecting and using it, please feel free to contact us for immediate assistance. We will reply to your inquiry within 12 hours

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>