HUDSON VALLEY HUD-L1506-AGB-CSI Harbor Park Modern Aged Brass and Satin Ivory Table Lighting Instruction Manual
- June 4, 2024
- HUDSON VALLEY
Table of Contents
HARBOR PARK
L1506
INSTALLATION INSTRUCTIONS
HUD-L1506-AGB-CSI Harbor Park Modern Aged Brass and Satin Ivory Table
Lighting
| ITEM | DESCRIPTION | PART NUMBER |
|---|---|---|
| 1 | FIXTURE ASSEMBLY | FAS-OL1506 |
| 2 | HARP | HRP-0L1506 |
| 3 | SHADE | SHD-OL1506 |
| 4 | BULB | NOT INCLUDED |
| 5 | DIFFUSER | DIF-0L1506 |
| 6 | FINIAL | FIN-0L1506 |
| 7 | CORD | CRD-OL1506 |
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY-TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- REMOVE THE FIXTURE, PARTS, AND PARTS BAG(S) FROM THE CARTON. BEFORE DISCARDING THE CARTON, DOUBLE-CHECK TO MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE TO THE FIXTURE.
- DIMMING: THE FIXTURE CAN BE CONTROLLED BY A WALL-DIMMING DEVICE. ONLY USE TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS MARKED FOR USE WITH LED COMPACT FLUORESCENT-INCANDESCENT LIGHT SOURCE ONLY. THESE CAN BE PROVIDED BY YOUR LOCAL ELECTRICAL DISTRIBUTOR, HOME CENTER, OR HARDWARE STORE. · PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS
FIXTURE INSTALLATION
-
Insert the HARP (2) by squeezing the sides and placing on the Saddle of the FIXTURE ASSEMBLY (1)
-
Install the BULB (4) into the socket. THIS FIXTURE IS RATED FOR 75 WATT LAMP. DO NOT EXCEED THE
RECOMMENDED WATTAGE! -
Carefully remove the protective covering over the SHADE (3), and DIFFUSER(5). place the SHADE (3), DIFFUSER(5) over the HARP (2), and secure with the FINIAL(6).
-
Plug the CORD (7) into the wall outlet. Turn the switch on the socket.
www.hvlgroup.com
Questions? We’re here to help!
Contact us at
CustomerService@hvlgroup.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>