MEAN WELL PCD-60-500B 60W Single Output AC Dimmable LED Power Supply Owner’s Manual

MEAN WELL PCD-60-500B 60W Single Output AC Dimmable LED Power Supply

Product Information

The 60W Single Output AC Dimmable LED Power Supply is part of the PCD-60 series. It is designed to provide a reliable and efficient power source for dimmable LED lighting applications. The power supply has a compact design and is suitable for indoor use with an IP42 rating.

Key Specifications

• Model: PCD-60-500B, PCD-60-700B, PCD-60-1050B, PCD-60-1400B, PCD-60-1750B, PCD-60-2000B, PCD-60-2400B
• Output Current: 500mA, 700mA, 1050mA, 1400mA, 1750mA, 2000mA, 2400mA
• Operating Voltage Range: 70 ~ 108V, 50 ~ 86V, 34 ~ 57V, 25 ~ 43V, 20 ~ 34V, 18 ~ 30V, 15 ~ 25V
• Rated Power: 54W, 60.2W, 59.85W, 60.2W, 59.5W, 60W, 60W
• Ripple & Noise (max.): 10.2Vp-p, 5.6Vp-p, 3.8Vp-p, 3.4Vp-p, 3.3Vp-p, 2.4Vp-p, 2.4Vp-p
• No Load Output Voltage (max.): 118V, 100V, 63V, 50V, 50V, 35V, 35V
• Setup Time: 500ms / 230VAC at full load
• Voltage Range: 180~295VAC
• Frequency Range: 47 ~ 63Hz
• Power Factor (Typ.): PF>0.9/230VAC, PF>0.9/277VAC at full load
• Total Harmonic Distortion: THD<20% when output loading 60% (PCD-60-500B loading 65%) at 230VAC input and output loading 75% at 277VAC input
• Efficiency (Typ.): 87%, 86%, 86%, 87%, 87%, 87%, 86%
• AC Current (Typ.): 0.6A/230VAC, 0.5A/277VAC
• Inrush Current (Typ.): COLD START 13A (twidth=50s measured at 50% Ipeak) at 230VAC
• Max. No. of PSUs on 16A Circuit Breaker: 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
• Leakage Current: (information not provided)

Product Usage Instructions

To use the 60W Single Output AC Dimmable LED Power Supply, follow these instructions:

1. Ensure that the power supply is compatible with your dimmable LED lighting application based on the model and output current specifications.
2. Connect the power supply to the AC input voltage within the specified voltage range (180~295VAC) and frequency range (47 ~ 63Hz).
3. Make sure the power supply is properly grounded to prevent electrical hazards.
4. Connect the output of the power supply to your dimmable LED lighting system, ensuring that the polarity is correct.
5. If necessary, adjust the dimming settings according to the instructions provided by your LED lighting system manufacturer.
6. Monitor the power supply’s operation and ensure that it is delivering the desired output power and current accurately.
7. If any issues or abnormalities occur, refer to the troubleshooting section of the user manual or contact the manufacturer’s customer support for assistance.

Note: For specific information regarding leakage current, please refer to the user manual or contact the manufacturer for clarification.

Features

• AC phase-cut dimming
• Work with leading edge and trailing edge TRIAC dimmers
• Built-in active PFC function
• Constant current design
• Protections: Short circuit / Over temperature
• Cooling by free air convection
• Fully isolated plastic case
• IP42 design
• Class II power unit, no FG
• Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
• 100% full load burn-in test
• Low cost
• High reliability
• 3 years warranty

GTIN CODE

• MW Search: https://www.meanwell.com/serviceGTIN.asox

SPECIFICATION

MODEL| PCD-60-500B| PCD-60-700B| PCD-60-1050B| PCD-60-1400B| PCD-60-1750B| PCD-60-2000B| PCD-60-2400B
---|---|---|---|---|---|---|---

OUTPUT

| RATED CURRENT| 500mA| 700mA| 1050mA| 1400mA| 1750mA| 2000mA| 2400mA
OPERATING VOLTAGE RANGE| 70 ~ 108V| 50 ~ 86V| 34 ~ 57V| 25 ~ 43V| 20 ~ 34V| 18 ~ 30V| 15 ~ 25V
CURRENT ACCURACY| ±5.0%
RATED POWER| 54W| 60.2W| 59.85W| 60.2W| 59.5W| 60W| 60W
RIPPLE & NOISE (max.) **Note.1| 10.2Vp-p| 5.6Vp-p| 3.8Vp-p| 3.4Vp-p| 3.3Vp-p| 2.4Vp-p| 2.4Vp-p
NO LOAD OUTPUT VOLTAGE (max.)| 118V| 100V| 63V| 50V| 50V| 35V| 35V
SETUP TIME**| 500ms / 230VAC at full load

INPUT

| VOLTAGE RANGE| 180~295VAC
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to “Power Factor Characteristic” curve)
TOTAL HARMONIC DISTORTION| THD< 20% when output loading≧60%(PCD-60-500B loading≧65%)at 230VAC input and output loading≧75% at 277VAC input
EFFICIENCY (Typ.)| 87%| 86%| 86%| 87%| 87%| 87%| 86%
AC CURRENT (Typ.)| 0.6A/230VAC        0.5A/277VAC
INRUSH CURRENT(Typ.)| COLD START 13A (twidth=50μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.5mA / 240VAC
PROTECTION| SHORT CIRCUIT| Hiccup mode, recovers automatically after fault condition is removed.
OVER TEMPERATURE| Shut down o/p voltage, auto-recovery

ENVIRONMENT

| WORKING TEMP.| -30 ~ +45℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

| SAFETY STANDARDS| ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, EAC TP TC 004,IP42 approved
WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C ; BS EN/EN61000-3-3,EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(Surge 2KV), criteria B,EAC TP TC 020

OTHERS

| MTBF| 3910.3K hrs min. Telcordia SR-332 (Bellcore) 358.0Khrs min.       MIL-HDBK-217F (25℃)
DIMENSION| 1286031.5mm (LWH)
PACKING| 0.35Kg;30pcs/11.5Kg/0.58CUFT
NOTE|

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
3. To fulfill the requirements of the latest Er regulation for lighting fixtures, this LED power supply can only be used behind a switch without being permanently connected to the mains.
4. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitudes higher than 2000m(6500ft).
5. For any application note and IP water proof function installation caution, please refer our user manual before using.
   https://www.meanwell.com/Upload/PDF/LED_EN.pdf

   Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Mechanical Specification

Block Diagram

Derating Curve

Static Characteristics

Power Factor Characteristic

EFFICIENCY vs LOAD (PCD-60-500B)

PCD-60 series possess superior working efficiency that up to 87% can be reached in field applications.

AC Dimming Operation

• The following diagram depicts a typical installation utilizing the PCD-60 :
  Under direct driving, the power supply will work in “constant current mode (CC)” and output voltage of the power supply will be clamped by sum of forward voltage (VF) of the LED strip.

Dimmer Compatibility Chart

Conduction angle: 30 degrees(min.) / 180 degrees(max.)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>