Shenzhen Step Electronic Lighting JDWGWR01 Bluetooth Wireless PIR Sensor User Manual
- June 6, 2024
- Shenzhen Step Electronic Lighting
Table of Contents
User Manual
Product specifications
| Product name | Bluetooth Wireless PIR sensor |
|---|---|
| Product model | 3DWGWRO1 |
| Wireless connection | Bluetooth 4.2 |
| Battery Specification | CR2450 |
| OS | Android5.0/10S10 or above |
| size | 616115mm |
| Operating temperature | – 10C° – +45C° |
| Storage humidity | 0-95% RH, non-condensing |
The model approval code of radio transmitting equipment is printed on the nameplate of the product shell and can be viewed on the surface of the machine after unpacking
Dimensions
Key illustration
| Key | Function |
|---|---|
| Reset / activate key | Press 5S reset or Activate the device |
Configuration device
- Download and install the “riphomeapp” by scanning the QR code below；
- Turn on the power and add the device in the app
- After adding successfully, the device can be configured through app
Introduction of main functions
Infrared detection of the human body, When human movement is detected, the PIR sensor sends preset instructions to other networked devices
More functions can be set through the app, please follow the “riphomeapp” guidelines
USA Notification:
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>